论格里耶《反复》的构成及其意义

"反复"是格里耶"新小说"的理念和叙述手法。《反复》采用了富有新意的"反复"手段,表现出作者对"新小说"叙事传统的继承和提炼,使其在新时期的法国文坛上富有新意。

在可能与不可能之间——罗伯—格里耶的新作《反复》中的矛盾式叙述

罗伯—格里耶新作的《反复》,再一次显示出了作家所开辟的“新小说”的特有风采。它同样是一部迷宫似的作品,是一部充满智力游戏而又不守规则的作品。它令人兴奋,也令人困惑,它激起读者探索迷宫的情趣,也捉弄得读者对之望而生畏。而这一切的魅力与诱惑无疑得之于小说中那些精神容貌相似,却又有着不同情感欲望的叙述者们,得之于小说那既别具一格却又似是而非的叙述话语,得之于小说那诸种可能与不可能的谜一般的人物设置与情节展现。

解读罗伯-格里耶小说新作《反复》

本文旨在通过对罗伯格里耶小说新作《反复》的解读 ,分析作者在情节设置、场景描写、形象塑造诸方面对先前文本的参照、挪用和重复 ,并指出作者经由不同的叙述维度 ,营造出不确定性的叙事迷宫 ,从而解构对作品主题的单一阐释。

Hydrogen production performance of the non⁃platinum⁃based MoS_(2)/CuS cathode in microbial electrolytic cells

MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.

Microstructure and ablation behavior of Zr-based ultra-high-temperature gradient composites

To obtain high-performance Zr-based ultra-high-temperature composites,Zr-based ultra-high-temperature gradient composites were prepared by changing the laying method of the infiltrant via reactive melt infiltration.The effects of different infiltrant laying methods on the microstructure and ablative properties of Zr-based ultrahigh-temperature gradient composites were investigated.The results showed that the gradient structure of the Zr-based ultrahigh-temperature gradient composites differed when the composition ratio of the infiltrant was changed.When the thicknesses of the Zr/Mo/Si layers were 6/4/12 mm and 8/2/12 mm,the SiMoZrC solid solution content in the samples increased and decreased along the infiltration direction,respectively.The gradient samples were ablated in an oxyacetylene flame at 3000°C for 40 s.The ablation resistance of the sample was the highest when the infiltrant was a powder and the thickness of the Zr/Mo/Si layer was 6/4/12 mm.

Microstructure and mechanical properties of AZ31-Mg_2Si in situ composite fabricated by repetitive upsetting

AZ31-4.6% Mg2Si （mass fraction） composite was prepared by conventional casting method. Repetitive upsetting （RU） was applied to severely deforming the as-cast composite at 400 ℃ for 1, 3, and 5 passes. Finite element analysis of the material flow indicates that deformation concentrates in the bottom region of the sample after 1 pass, and much more uniform deformation is obtained after 5 passes. During multi-pass RU process, both dendritic and Chinese script type Mg2Si phases are broken up into smaller particles owing to the shear stress forced by the matrix. With the increasing number of RU passes, finer grain size and more homogeneous distribution of Mg2Si particles are obtained along with significant enhancement in both strength and ductility. AZ31-4.6%Mg2Si composite exhibits tensile strength of 284 MPa and elongation of 9.8%after 5 RU passes at 400 ℃ compared with the initial 128 MPa and 5.4%of original AZ31-4.6%Mg2Si composite.

EXPERIMENTAL RESEARCH AND NONLINEAR FINITE ELEMENT ANALYSIS ON NEW TYPE JOINT BETWEEN COLUMN AND STEEL BEAM OF CONCRETE-FILLED RECTANGULAR STEEL TUBULAR

Experimental results of new type joints between the column and the. steel beam of concrete-filled rectangular steel tubular （CFRT） under reversed cyclic loads are presented. The earthquake resistant capacity of the joint is influenced by infilled concrete, stiffener length and relative dimensions of column and beam. It is found that the hysteresis curves obtained in the experiment are full and the joints have a good energy dissipation capacity. The nonlinear finite element models are also used to analyze the hysteresis behavior of the joints under reversed cyclic loads using ANSYS 8.0. The influences of the stiffener length and the infilled concrete are analyzed. Analytical results show that the stiffener length and the infilled concrete are critical for the joints. Furthermore, the skeleton curves of the finite element models are in good agreement with those of experiments.

Determination of Optimum Conditions for Cell-wall Destruction of Auricularia auricula Mycelia under the Synergistic Effect of Ultrasonic Waves and Repeated Freeze-thaw Cycles

We aimed to investigate the synergistic effects of ultrasonic waves and repeated freeze-thaw cycles on cel-wal destruction of Auricularia auric-ula mycelia, and determine the best combination of conditions for cel-wal destruc-tion of Auricularia auricula mycelia. [Method] The effects of destruction time, added water, destruction times, freeze time and number of freeze-thaw cycles during ultra-sonic treatment on polysaccharide yield were investigated by single-factor test in our research. The optimum conditions for cel-wal destruction of Auricularia auricula mycelia by the synergistic effect of ultrasonic waves and repeated freeze-thaw cycles were ascertained by orthogonal test. [Result] The results of single test indicated the best combination of conditions was as fol ows： freeze time, 30 min; destruction time, 20 min; added water, 15 times; destruction times, 2 times; number of freeze-thaw cycles, 3 cycles. The results of orthogonal test indicated the influencing factors ranked as destruction time 〉 destruction times 〉 freeze time. The best combination of conditions was as fol ows： freeze time, 30 min; destruction time, 25 min; destruc-tion times, 2 times. Under above conditions, the polysaccharide yield reached 57.76 mg/g. [Conclusion] This research would provide a basis and reference for practical production.

Force assistant master-slave telerehabilitation robotic system

A prototype of the master slave telerehabilitation robotic system with force feedback is developed. This system contains a pair of robots with the master being operated by the therapist and the slave following the master to guide the patients to exercise. A slave device with a slave controller is designed to stretch and mobilize the impaired elbow joints accurately and safely. A master device with a master controller is designed to control/monitor the procedure of treatment and assess the outcome of treatment remotely and accurately. By using the twoport network theory and the circuit equivalent impedance models, the position-force control scheme is designed to generate force feedback for the therapist who is to be informed of the interaction force between the subject and the robot arm during exercise. Experiments were conducted with a healthy male. Results show that the therapist can guide the patient to exercise by the master arm and can feel the interaction forces between the impaired arm and the robot. Compared with the traditional therapy, this system is more cost-efficient, more convenient and safer for both the stroke patients and the clinicians.

朱子楚辞学研究方法的理学背景发微

朱子一生最后绝笔为《楚辞集注》。正因为感同身受,朱子才能在生命中最后的几年,花极大的心血注解《楚辞》,实则是借他人之酒杯,浇胸中之块垒,在极力表彰屈原"忠君爱国"精神的同时,极力痛斥扬雄之"偷生幸死",将忠义之精神、君臣之大义发挥得淋漓尽致,也将朱子心中郁积之情愫表露得一清二楚。正如朱子在序言中的夫子自道,《楚辞集注》度越前人的方法有两端:沈潜反复与嗟叹咏歌。"沈潜反复"是朱子治学的普遍方法,"嗟叹咏歌"是朱子治诗赋的特别方法。二者之间其实并非简单的并列关系,而是理一分殊的关系,也可谓主从之关系。

Mechanism for thermite reactions of aluminum/iron-oxide nanocomposites based on residue analysis

Sol-gel method was employed to combine Al and iron-oxide to form nanocomposites （nano-Al/xero-Fe2O3 and micro-Al/xero-Fe2O3）. SEM, EDS and XRD analyses were used to characterize the nanocomposites and the results indicated that nano-Al and micro-Al were compactly wrapped by amorphous iron-oxide nanoparticles （about 20 nm）, respectively. The iron-oxide showed the mass ratio of Fe to O as similar as that in Fe2O3. Thermal analyses were performed on two nanocomposites, and four simple mixtures （nano-Al＋xero-Fe2O3, nano-Al＋micro-Fe2O3, micro-Al＋xero-Fe2O3, and micro-Al＋micro-Fe2O3） were also analyzed. There were not apparent distinctions in the reactions of thermites fueled by nano-Al. For thermites fueled by micro-Al, the DSC peak temperatures of micro-Al/Xero-Fe2O3 were advanced by 68.1 ℃ and 76.8 ℃ compared with micro-Al＋xero-Fe2O3 and micro-Al＋micro-Fe2O3, respectively. Four thermites, namely, nano-Al/xero-Fe2O3, nano-Al＋micro-Fe2O3, micro-Al/xero-Fe2O3, and micro-Al＋micro-Fe2O3, were heated from ambient temperature to 1020 ℃, during which the products at 660 ℃ and 1020 ℃ were collected and analyzed by XRD. Crystals of Fe, FeAl2O4, Fe3O4,α-Fe2O3, Al,γ-Fe2O3, Al2.667O4, FeO andα-Al2O3 were indexed in XRD patterns. For each thermite, according to the specific products, the possible equations were given. Based on the principle of the minimum free energy, the most reasonable equations were inferred from the possible reactions.

Evaluation of PS-DInSAR technology for subsidence monitoring caused by repeated mining in mountainous area

The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.

Effect of CuO particle size on synthesis temperature and microstructure of Al_2O_(3p)-Al composites from Al-CuO system

Al2O3p-Al composites were synthesized using an in-situ reaction in the 80%Al-20%CuO （mass fraction） system. The effects of the CuO particle size on the synthesis temperature and microstructure of the composites were investigated by various methods. The results indicate that the CuO particle size has a significant effect on the temperature at which the complete reaction in the Al-CuO system occurs：the temperature is 200 ℃ lower in the Al-CuO system containing CuO particles with sizes less than 6μm than that containing CuO particles with sizes less than 100μm. The interfacial bonding between Al2O3 particles and Al is not complete when the temperature is below a critical value. The morphology of the Al2O3 particles varies from ribbon-like shape to near spherical shape when the temperature is above a critical value. These two critical temperatures are affected by the particle size of CuO, and the critical temperature of the sample containing CuO particles with sizes less than 6μm is 100 ℃ lower than that of the sample containing CuO particles with sizes less than 100μm.

In-situ synthesis of Al_3Ti particles reinforced Al-based composite coating

Using titanium wires （99.5%, 200 μm in diameter） as a reactive source, an Al-based composite coating reinforced by titanium tri-aluminide （A13Ti） particles was fabricated by infiltration plus in-situ methods. According to the differential thermal analysis （DTA） curve, the reactive temperature between Ti wires and A1 matrix can be determined at 890 ℃. The obtained composite coatings were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and microhardness and wear test. The experimental results show that when holding period is 20 min at 890℃, the titanium wires react completely to in-situ synthesize Al3Ti particles, which presents blocky and strip-like states. The microhardness of in-situ synthesized Al3Ti particles is about 4.5 times that of the Al-matrix. Under the condition of dry sliding at 10 N load, compared with the unreinforced Al matrix, the composite coating fabricated with 20 min offers unique wear resistance behavior, and its wear mechanism is that the adhesive wear and abrasive wear coexist.

Effect of NiAl content on phases and microstructures of TiC-TiB_2-NiAl composites fabricated by reaction synthesis

TiC-TiB2-NiAl composites were fabricated by self-propagating high temperature reaction synthesis（SHS） with Ti, B4C, Ni and Al powders as raw materials. The effects of NiAl content on phase constituents and microstructures were investigated. The results show that the reaction products are composed of TiB2, TiC and NiAl. The content of NiAl increases with the adding of Ni＋Al in green compacts. TiB2, TiC and NiAl grains present in different shapes in the matrix, TiB2 being in hexagonal or rectangular shapes, TiC in spherical shapes, and NiAl squeezed into the gaps of TiC and TiB2 grains. With the increase of NiAl content, the grains of TiC-TiB2-NiAl composites are refined, their density and compressive strength are improved, and the shapes of TiC grains become spherical instead of irregular ones. Finally, the fracture mechanism of the composites transforms from intergranular fracture mode to the compounded fracture mode of intergranular fracture and transgranular fracture.

Isolation of Denitrifying Bacteria in Sea Sediment and Simulated Experiment of Removing Nitrate-N from Seawater

The objective of this research was to isolate denitrifying bacteria from sea sediment and simulate the removal efficiency of nitrate-N by denitrifying bacteria from seawater. The result showed that the isolated denitrifying bacteria could effectively remove nitrate-N from seawater. About 90 % of nitrate-N was removed by denitrifying bacteria from seawater within a week in the simulated experiment I （the initial concentration of nitrate-N was 100 mg/L）. The removal efficiency of nitrate-N reached about 70 % within one day in the simulated experiment Ⅱ （initial concentration of nitrate-N was 1 mg/L）. The final removal efficiency was about 98 % and 85 % in the simulated experiments Ⅰ and Ⅱ, respectively. It was found that there was positive correlation between the concentration of nitrate-N and the number of denitrifying bacteria in seawater. Lots of denitrifying bacteria would disappear and the seawater would become transparent once the process of bioremediation was completed.

Effects of Oleanolic Acid on the Immune Complex Allergic Reaction and Inflammation

When oleanolic acid (OA) was administered ig before and after sensitization on d 1 to d 5 and d 11 to d 17,it had no apparent effect on Arthus reaction.When it was administered at 48,24 and 1 h before challenge,however,Arthus reaction was significantly inhibited.OA showed markedly suppressive effects on reversible passive Arthus reaction and leukocyte migratory response.It could significantly stabilize erythrocyte membrane,inhibit the swelling of the rat's hind paw induced by in- jecting mycostatin,reduce the acid phosphatase content in the inflammatory exudate,suppress the syn- thesis or release of PGE,histamine,LTB4 and kinin,and the phlogistic action of PGE_2,histamine,5- HT and kinin.In addition,it could decrease the content of malonyldialdehyde (MDA) in hepatic tissue of alcohol-intoxicated mice,and increase the activity of catalase (CAT) in hepatic tissue of mice.OA had no apparent effect on the activity of super-oxide dismutase (SOD) in rat serum,on the content of immune complex in serum of rat with Arthus reaction,on the phagocytosis of monocytc-macrophage system,on the clearance of enzyme-containing immune complex by macrophage,or on the activity of total complement.

Micromechanical Tunable Optical Filter

A micromachined vertical cavity tunable filter with AlGaAs/GaAs distributed Bragg reflector is presented.This filter can be electrostatic tuning over a range of 28nm with an applied voltage of 7V.

Microstructure and interface thermal stability of C/Mo double-coated SiC fiber reinforced γ-TiAl matrix composites

C/Mo duplex coating interfacially modified SiC fiber-reinforced γ-TiAl matrix composite （SiCf/C/Mo/γ-TiA1） was prepared by foil-fiber-foil method to investigate its interfacial modification effect. SiCf/C/TiAl composites were also prepared under the same processing condition for comparision. Both kinds of the composites were thermally exposed in vacuum at 800 and 900℃ for different durations in order to study thermal stability of the interfacial zone. With the aids of scanning electron microscope （SEM） and energy dispersive spectrometer （EDS）, the interracial microstructures of the composites were investigated. The results reveal that, although adding the Mo coating, the interfacial reaction product of the SiCf/C/Mo/TiAl composite is the same with that of the SiCf/C/TiA1 composite, which is TiC/Ti2AlC between the coating and the matrix. However, C/Mo duplex coating is more efficient in hindering interfacial reaction than C single coating at 900 ℃ and below. In addition, a new layer of interfacial reaction product was found between Ti2AlC and the matrix after 900 ℃, 200 h thermal exposure, which is rich in V and close to the chemical composition of B2 phase.

ANALYTICAL SOLUTIONS FOR A MODE Ⅲ CRACK IN PIEZOELECTRIC MATERIALS

A mode Ⅲ crack problem in a transversely isotropic piezoelectric material subjected to uniform loads at infinity is studied based on exact boundary conditions. The complex potential approach is used to reduce the problem to Hilbert problem. As a result, closed form field solutions in the piezoelectric material and inside the crack are presented. It is shown that the stresses and electric displacement have square root singularities at the crack tips, but the electric field is uniform everywhere in the material and equal to the remote applied one. It is also found that the electric displacement intensity factor depends on both material properties and the mechanical loads, but not the electric loads. Hence it may be concluded that the electric loads have no influence on the field singularities.