Isothermal compression tests in a wide range of temperatures （300-500 ℃） and strain rates （0.001-10 s^-1）, were performed on 2099 alloy to reveal the hot deformation characteristics. In order to give a precise pr...Isothermal compression tests in a wide range of temperatures （300-500 ℃） and strain rates （0.001-10 s^-1）, were performed on 2099 alloy to reveal the hot deformation characteristics. In order to give a precise prediction of flow behavior, the obtained experimental data were modified by friction and temperature correction and then employed to derive the constitutive modeling. The effects of the temperature and strain rate on hot deformation behavior can be expressed by Zener-Hollomon parameter including Arrhenius term. Furthermore, the influence of strain was incorporated in the constitutive analysis by considering the effect of strain on material constants （i.e. a, n, Q and A）. Consequently, the flow stress curves predicted by the developed modeling show a good agreement with the corrected ones, which indicates that the developed constitutive modeling could give an accurate and precise prediction for the flow stress of 2099 alloy.展开更多
Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used...Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.展开更多
Based on the finite element method, a numerical investigation into the bonded repair efficiency of cracked plates under in plane biaxial loadings is presented. The main considerations are: reduction in stress intensi...Based on the finite element method, a numerical investigation into the bonded repair efficiency of cracked plates under in plane biaxial loadings is presented. The main considerations are: reduction in stress intensity factor (SIF) at the crack tip, the maximum tensile stress in the composite patch and the maximum shear stress in the adhesive bond between the patch and the plate. Without the patch, a tensile or compressive stress parallel to the crack has no effect on the SIF at the crack tip. While with a composite patch, there exists coupling effect between the normal stress parallel to the crack and the SIF, and the coupling effect depends significantly on ply orientation of the patch and the biaxial stress ratio of the plate.展开更多
AIM To explore a rapid and easy sequencing method for hepatitis C virus (HCV) genome, and establish a new sequencing method in China. METHODS Polymerase Chain Reaction (PCR) was combined with DNA sequencing techn...AIM To explore a rapid and easy sequencing method for hepatitis C virus (HCV) genome, and establish a new sequencing method in China. METHODS Polymerase Chain Reaction (PCR) was combined with DNA sequencing technique. PCR products were purified by agarose gel electrophoresis, polyacrylamide gel electrophoresis (PAGE), Polyethylene glycol (PEG) respectively. Then in the presence of a 5′ labeling PCR primer, purified PCR products were directly sequenced. By this method, HCV NS5b cDNA from two HCV infected individuals (HC 42 and HC 49) were sequenced.展开更多
Synthetic aperture radar (SAR) is theoretically based on uniform rectilinear motion. But in real situations, the flight cannot be kept in a uniform rectilinear motion due to many factors. Therefore, the motion compens...Synthetic aperture radar (SAR) is theoretically based on uniform rectilinear motion. But in real situations, the flight cannot be kept in a uniform rectilinear motion due to many factors. Therefore, the motion compensation is needed to achieve the high-resolution image. This paper proposes an improved motion information sensor (MIS)-based on global navigation statellite system (GNSS) and strapdown inertial navigation system (SINS) for SAR motion compensation. MIS can provide the long-term absolute accuracy, and the short-term high relative accuracy during SAR imaging. Many issues related to MIS, such as system design, error models and navigation algorithms, are stressed. Experimental results show that MIS can provide accurate navigation information (position, velocity and attitude) to meet the requirements of SAR motion compensation. Especially, MIS is suitable for the case: the accuracy of airplane master inertial navigation system is too low or not configured.展开更多
As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A ph...As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A phase autofocusing algorithm for compressed ISAR imaging is presented. In the algorithm, phase autofocusing for the sparse ISAR echoes is accomplished using the eigenvector method. Experimental results validate the effectiveness of the algorithm.展开更多
A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum re...A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum reduction of the phase noise by about 16dB can be achieved. Compared to other compensation methods,the technique proposed here is relatively simple and easy to implement. Key building blocks for realizing the noise cancellation,including the delay variable PFD and compensation current source, are specially designed. Both the behavior level and circuit level simulation results are presented.展开更多
With regard to the phase compensation in inverse synthetic aperture radar (ISAR),the modified Doppler centroid tracking (MDCT) method is developed which applies the phase gradient autofocus (PGA) algorithm developed b...With regard to the phase compensation in inverse synthetic aperture radar (ISAR),the modified Doppler centroid tracking (MDCT) method is developed which applies the phase gradient autofocus (PGA) algorithm developed by Wahl[1]to improve the Doppler centroid tracking (DCT) method[2].When the phase compensation is performed,the proposed approach smartly eliminates the effect of the rotational phase component (RPC) on the estimation of the translational phase component (TPC) by circular shifting,windowing and iteration steps. After several iterations,the maximum likelihood estimation and compensation of the TPC of the target can be realized more effectively.The processing results of live data show that the proposed method can improve the imaging quality of ISAR significantly.展开更多
Aim To synthesize isonucleoside-incorporated oligonucleotides and investigatetheir binding abilities with complementary sequences. Methods The synthesis was performed on DNAsynthesizer, and the binding behavior was in...Aim To synthesize isonucleoside-incorporated oligonucleotides and investigatetheir binding abilities with complementary sequences. Methods The synthesis was performed on DNAsynthesizer, and the binding behavior was investigated by thermal denaturation studies. Results Fourkinds of single isonucleoside containing oligonucleotides were synthesized. The results of thermaldenaturation showed that the existence of isonucleoside decreased the stability of duplex, and theeffect was more obvious when the isonucleoside was in the middle of the sequence. No obviousdifference was observed when 6'-OH of isonucleoside was free or was protected by allyl group.Conclusions The existence of isonucleoside in oli-gonucleotide makes chain twist and decreased thestability of duplex.展开更多
The bilateral trade margin has been surged rapidly as cooperation over trade of agriculture products between China and countries on the silk road econom- ic belt comes closely and stands as each others＇ essential par...The bilateral trade margin has been surged rapidly as cooperation over trade of agriculture products between China and countries on the silk road econom- ic belt comes closely and stands as each others＇ essential partner, At present, however, the trade coexistence in bilateral industries that the concentration focused by markets and products is too much of the same. In light of this, sides over these countries must enhance their mutual understanding and promote more exchanges to seek tactics that can ovemome the shorthand in commercial trade,allowing win-win in the agriculture production trade.展开更多
The burst feeding behavior of ZL205 A casting under mechanical vibration and low pressure was investigated by casting experiment and physical model. Experimental results indicated that the burst feeding appeared repea...The burst feeding behavior of ZL205 A casting under mechanical vibration and low pressure was investigated by casting experiment and physical model. Experimental results indicated that the burst feeding appeared repeatedly during solidification and left a shrinkage cavity with layered structure under mechanical vibration. The castings with less shrinkage and higher density could be achieved through the vibration. The calculation results of physical model showed that the burst feeding could perform spontaneously under vibration while difficultly without vibration in low-pressure die casting. The obstruction of a casting could be broken and the grains could be rearranged by the vibration. And the obstruction could be carried away due to the inner and outer pressure difference, causing a burst feeding.展开更多
Influence of the combination of nutrient feed with dissolved oxygen control on taxol production in suspension cultures of Taxus chinensis (Pilg.) Rehd. was investigated in bioreactors. Addition of feeding medium with ...Influence of the combination of nutrient feed with dissolved oxygen control on taxol production in suspension cultures of Taxus chinensis (Pilg.) Rehd. was investigated in bioreactors. Addition of feeding medium with 20 g/L sucrose on day 16 enhanced both the biomass and taxol production in 5-L bioreactors. Further investigation of the fed-batch cultures in a 20-L bioreactor showed that cultivation under a low dissolved oxygen tension (DOT) of 20% for the entire culture resulted in the highest taxol content of 0.98 mg/g DW, while the taxol production was lower than that with 40% and 60% DOT. Moreover, taxol accumulation was remarkably improved by the cultivation of cells initially under DOT of 60% for 20 d followed by changing the DOT to 20% for another 12 d. By combining the use of these two strategies, a maximum taxol content of 18.7 mg/L was obtained in a 20-L bioreactor.展开更多
To encourage retailers to form cooperative alliances to jointly replenish inventory,considering that the supplier provides a flexible lead time and quantity discount to retailers,a model of average total cost per unit...To encourage retailers to form cooperative alliances to jointly replenish inventory,considering that the supplier provides a flexible lead time and quantity discount to retailers,a model of average total cost per unit time of periodic joint replenishment is constructed,and an approximate algorithm,which can satisfy the requirement of any given precision,is given.The cost allocation rule in the core of the joint replenishment game is designed based on the cooperative game theory.The numerical experiment results show that the proposed algorithm can quickly solve the joint replenishment problem when the item number is not greater than 640.The retailer's cost saving rate is always greater than 0,and it increases with the increase in quantity discount and fixed cost after adopting the given cost allocation rule.With the increase in the safety stock level,the retailer's cost saving rate increases first and then decreases;and the retailer's cost saving rate increases with the increase in the size of the alliance,but it decreases as the number of product category increases.The proposed cost allocation rule can reduce the retailer's cost up to 20%,which is conducive to forming a cooperative coalition.展开更多
To better retain useful weak low-frequency magnetotelluric(MT)signals with strong interference during MT data processing,we propose a SVM-CEEMDWT based MT data signal-noise separation method,which extracts the weak MT...To better retain useful weak low-frequency magnetotelluric(MT)signals with strong interference during MT data processing,we propose a SVM-CEEMDWT based MT data signal-noise separation method,which extracts the weak MT signal affected by strong interference.First,the approximate entropy,fuzzy entropy,sample entropy,and Lempel-Ziv(LZ)complexity are extracted from the magnetotelluric data.Then,four robust parameters are used as the inputs to the support vector machine(SVM)to train the sample library and build a model based on the different complexity of signals.Based on this model,we can only consider time series with strong interference when using the complementary ensemble empirical mode decomposition(CEEMD)and wavelet threshold(WT)for noise suppression.Simulation results suggest that the SVM based on the robust parameters can distinguish the time periods with strong interference well before noise suppression.Compared with the CEEMD WT,the proposed SVM-CEEMDWT method retains more low-frequency low-variability information,and the apparent resistivity curve is smoother and more continuous.Moreover,the results better reflect the deep electrical structure in the field.展开更多
文摘Isothermal compression tests in a wide range of temperatures （300-500 ℃） and strain rates （0.001-10 s^-1）, were performed on 2099 alloy to reveal the hot deformation characteristics. In order to give a precise prediction of flow behavior, the obtained experimental data were modified by friction and temperature correction and then employed to derive the constitutive modeling. The effects of the temperature and strain rate on hot deformation behavior can be expressed by Zener-Hollomon parameter including Arrhenius term. Furthermore, the influence of strain was incorporated in the constitutive analysis by considering the effect of strain on material constants （i.e. a, n, Q and A）. Consequently, the flow stress curves predicted by the developed modeling show a good agreement with the corrected ones, which indicates that the developed constitutive modeling could give an accurate and precise prediction for the flow stress of 2099 alloy.
文摘Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.
文摘Based on the finite element method, a numerical investigation into the bonded repair efficiency of cracked plates under in plane biaxial loadings is presented. The main considerations are: reduction in stress intensity factor (SIF) at the crack tip, the maximum tensile stress in the composite patch and the maximum shear stress in the adhesive bond between the patch and the plate. Without the patch, a tensile or compressive stress parallel to the crack has no effect on the SIF at the crack tip. While with a composite patch, there exists coupling effect between the normal stress parallel to the crack and the SIF, and the coupling effect depends significantly on ply orientation of the patch and the biaxial stress ratio of the plate.
文摘AIM To explore a rapid and easy sequencing method for hepatitis C virus (HCV) genome, and establish a new sequencing method in China. METHODS Polymerase Chain Reaction (PCR) was combined with DNA sequencing technique. PCR products were purified by agarose gel electrophoresis, polyacrylamide gel electrophoresis (PAGE), Polyethylene glycol (PEG) respectively. Then in the presence of a 5′ labeling PCR primer, purified PCR products were directly sequenced. By this method, HCV NS5b cDNA from two HCV infected individuals (HC 42 and HC 49) were sequenced.
文摘Synthetic aperture radar (SAR) is theoretically based on uniform rectilinear motion. But in real situations, the flight cannot be kept in a uniform rectilinear motion due to many factors. Therefore, the motion compensation is needed to achieve the high-resolution image. This paper proposes an improved motion information sensor (MIS)-based on global navigation statellite system (GNSS) and strapdown inertial navigation system (SINS) for SAR motion compensation. MIS can provide the long-term absolute accuracy, and the short-term high relative accuracy during SAR imaging. Many issues related to MIS, such as system design, error models and navigation algorithms, are stressed. Experimental results show that MIS can provide accurate navigation information (position, velocity and attitude) to meet the requirements of SAR motion compensation. Especially, MIS is suitable for the case: the accuracy of airplane master inertial navigation system is too low or not configured.
基金Supported by the National Natural Science Foundation of China(61071165)the Program for NewCentury Excellent Talents in University(NCET-09-0069)the Defense Industrial Technology Development Program(B2520110008)~~
文摘As same as the conventional inverse synthetic aperture radar（ISAR）, the compressed ISAR also requires the echo signal based motion compensation, which consists of the range alignment and the phase autofoeusing. A phase autofocusing algorithm for compressed ISAR imaging is presented. In the algorithm, phase autofocusing for the sparse ISAR echoes is accomplished using the eigenvector method. Experimental results validate the effectiveness of the algorithm.
文摘A novel method to partially compensate sigma-delta shaped noise is proposed. By injecting the compensation current into the passive loop filter during the delay time of the phase frequency detector（PFD）,a maximum reduction of the phase noise by about 16dB can be achieved. Compared to other compensation methods,the technique proposed here is relatively simple and easy to implement. Key building blocks for realizing the noise cancellation,including the delay variable PFD and compensation current source, are specially designed. Both the behavior level and circuit level simulation results are presented.
文摘With regard to the phase compensation in inverse synthetic aperture radar (ISAR),the modified Doppler centroid tracking (MDCT) method is developed which applies the phase gradient autofocus (PGA) algorithm developed by Wahl[1]to improve the Doppler centroid tracking (DCT) method[2].When the phase compensation is performed,the proposed approach smartly eliminates the effect of the rotational phase component (RPC) on the estimation of the translational phase component (TPC) by circular shifting,windowing and iteration steps. After several iterations,the maximum likelihood estimation and compensation of the TPC of the target can be realized more effectively.The processing results of live data show that the proposed method can improve the imaging quality of ISAR significantly.
文摘Aim To synthesize isonucleoside-incorporated oligonucleotides and investigatetheir binding abilities with complementary sequences. Methods The synthesis was performed on DNAsynthesizer, and the binding behavior was investigated by thermal denaturation studies. Results Fourkinds of single isonucleoside containing oligonucleotides were synthesized. The results of thermaldenaturation showed that the existence of isonucleoside decreased the stability of duplex, and theeffect was more obvious when the isonucleoside was in the middle of the sequence. No obviousdifference was observed when 6'-OH of isonucleoside was free or was protected by allyl group.Conclusions The existence of isonucleoside in oli-gonucleotide makes chain twist and decreased thestability of duplex.
基金Supported by Demonstration Base of Industry-University-Research Cooperation based Training for Postgraduate Students in the Xinjiang Uygur Autonomous Region(xjaucxyyjs-20141019)~~
文摘The bilateral trade margin has been surged rapidly as cooperation over trade of agriculture products between China and countries on the silk road econom- ic belt comes closely and stands as each others＇ essential partner, At present, however, the trade coexistence in bilateral industries that the concentration focused by markets and products is too much of the same. In light of this, sides over these countries must enhance their mutual understanding and promote more exchanges to seek tactics that can ovemome the shorthand in commercial trade,allowing win-win in the agriculture production trade.
基金Projects(51475120,U1537201) supported by the National Natural Science Foundation of China
文摘The burst feeding behavior of ZL205 A casting under mechanical vibration and low pressure was investigated by casting experiment and physical model. Experimental results indicated that the burst feeding appeared repeatedly during solidification and left a shrinkage cavity with layered structure under mechanical vibration. The castings with less shrinkage and higher density could be achieved through the vibration. The calculation results of physical model showed that the burst feeding could perform spontaneously under vibration while difficultly without vibration in low-pressure die casting. The obstruction of a casting could be broken and the grains could be rearranged by the vibration. And the obstruction could be carried away due to the inner and outer pressure difference, causing a burst feeding.
文摘Influence of the combination of nutrient feed with dissolved oxygen control on taxol production in suspension cultures of Taxus chinensis (Pilg.) Rehd. was investigated in bioreactors. Addition of feeding medium with 20 g/L sucrose on day 16 enhanced both the biomass and taxol production in 5-L bioreactors. Further investigation of the fed-batch cultures in a 20-L bioreactor showed that cultivation under a low dissolved oxygen tension (DOT) of 20% for the entire culture resulted in the highest taxol content of 0.98 mg/g DW, while the taxol production was lower than that with 40% and 60% DOT. Moreover, taxol accumulation was remarkably improved by the cultivation of cells initially under DOT of 60% for 20 d followed by changing the DOT to 20% for another 12 d. By combining the use of these two strategies, a maximum taxol content of 18.7 mg/L was obtained in a 20-L bioreactor.
基金The National Natural Science Foundation of China(No.71531004).
文摘To encourage retailers to form cooperative alliances to jointly replenish inventory,considering that the supplier provides a flexible lead time and quantity discount to retailers,a model of average total cost per unit time of periodic joint replenishment is constructed,and an approximate algorithm,which can satisfy the requirement of any given precision,is given.The cost allocation rule in the core of the joint replenishment game is designed based on the cooperative game theory.The numerical experiment results show that the proposed algorithm can quickly solve the joint replenishment problem when the item number is not greater than 640.The retailer's cost saving rate is always greater than 0,and it increases with the increase in quantity discount and fixed cost after adopting the given cost allocation rule.With the increase in the safety stock level,the retailer's cost saving rate increases first and then decreases;and the retailer's cost saving rate increases with the increase in the size of the alliance,but it decreases as the number of product category increases.The proposed cost allocation rule can reduce the retailer's cost up to 20%,which is conducive to forming a cooperative coalition.
基金funded by the National Key R&D Program of China(No.2018YFC0603202)the National Natural Science Foundation of China(No.41404111)+1 种基金Natural Science Foundation of Hunan Province(No.2018JJ2258)Hunan Provincial Science and Technology Project Foundation(No.2018TP1018)
文摘To better retain useful weak low-frequency magnetotelluric(MT)signals with strong interference during MT data processing,we propose a SVM-CEEMDWT based MT data signal-noise separation method,which extracts the weak MT signal affected by strong interference.First,the approximate entropy,fuzzy entropy,sample entropy,and Lempel-Ziv(LZ)complexity are extracted from the magnetotelluric data.Then,four robust parameters are used as the inputs to the support vector machine(SVM)to train the sample library and build a model based on the different complexity of signals.Based on this model,we can only consider time series with strong interference when using the complementary ensemble empirical mode decomposition(CEEMD)and wavelet threshold(WT)for noise suppression.Simulation results suggest that the SVM based on the robust parameters can distinguish the time periods with strong interference well before noise suppression.Compared with the CEEMD WT,the proposed SVM-CEEMDWT method retains more low-frequency low-variability information,and the apparent resistivity curve is smoother and more continuous.Moreover,the results better reflect the deep electrical structure in the field.
