A series of dynamic model tests that were performed on a geogrid-reinforced square footing are presented.The dynamic(sinusoidal)loading was applied using a mechanical testing and simulation(MTS)electro-hydraulic servo...A series of dynamic model tests that were performed on a geogrid-reinforced square footing are presented.The dynamic(sinusoidal)loading was applied using a mechanical testing and simulation(MTS)electro-hydraulic servo loading system.In all the tests,the amplitude of loading was±160 kPa;the frequency of loading was 2 Hz.To better ascertain the effect of reinforcement,an unreinforced square footing was first tested.This was followed by a series of tests,each with a single layer of reinforcement.The reinforcement was placed at depths of 0.3B,0.6B and 0.9B,where B is the width of footing.The optimal depth of reinforcement was found to be 0.6B.The effect of adopting this value versus the other two depths was quantified.The single layer of geogrid had an effective reinforcement depth of 1.7B below the footing base.The increase of the depth between the topmost geogrid layer and the bottom of the footing(within the range of 0.9B)did not change the failure mode of the foundation.展开更多
The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip f...The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip footing upon both reinforced and unreinforced clayey slopes were presented.The objectives of this work are to:1) determine the influence of reinforcement on the bearing-capacity of the strip footings adjacent slopes,2) suggest an optimum number of reinforcement and 3) survey the effect of friction angle in clayey soils reinforced by geogrids.The investigations were carried out by varying the edge distance of the footing from slope.Also different numbers of geosynthetic layers were applied to obtaining the maximum bearing capacity and minimum settlement.To achieve the third objective,two different friction angles were used.The results show that the load?settlement behavior and ultimate bearing capacity of footing can be considerably improved by the inclusion of reinforcing layer.But using more than one layer reinforcement,the ultimate bearing capacity does not change considerably.It is also shown that for both reinforced and unreinforced slopes,the bearing capacity increases with an increase in edge distance.In addition,as the soil friction angle is increased,the efficiency of reinforcing reduces.展开更多
From a financial point of view,urbanization frequently enforces the clients to construct superstructures near the slopes,giving rise to increasing the risk of building instability.By conducting a series of small-scale...From a financial point of view,urbanization frequently enforces the clients to construct superstructures near the slopes,giving rise to increasing the risk of building instability.By conducting a series of small-scale plate load tests,this work aims to investigate the effects of installing geotextile reinforcement layers in sandy slope and reducing the apex angle of triangular shell strip footings.The results show considerable effect of using geotextile-reinforced layers and decreasing the apex angle on the ultimate bearing capacity of shell foundations.With increasing foundation distance from the slope,the adverse effect of the slope is reduced.However,as the distance decreases,the effect of reinforcement and apex angle is increased.For practical applications,empirical equations are also presented for determining the ultimate bearing capacity of the footings and scale effect as well.Finally,3D numerical simulations are executed and compared with the experimental results.展开更多
基金Projects(41962017,51469005)supported by the National Natural Science Foundation of ChinaProject(2017GXNSFAA198170)supported by the Natural Science Foundation in Guangxi Province,China+1 种基金Project supported by the Guangxi University of Science and Technology Innovation Team Support Plan,ChinaProject supported by the High Level Innovation Team and Outstanding Scholars Program of Guangxi Institutions of Higher Learning,China。
文摘A series of dynamic model tests that were performed on a geogrid-reinforced square footing are presented.The dynamic(sinusoidal)loading was applied using a mechanical testing and simulation(MTS)electro-hydraulic servo loading system.In all the tests,the amplitude of loading was±160 kPa;the frequency of loading was 2 Hz.To better ascertain the effect of reinforcement,an unreinforced square footing was first tested.This was followed by a series of tests,each with a single layer of reinforcement.The reinforcement was placed at depths of 0.3B,0.6B and 0.9B,where B is the width of footing.The optimal depth of reinforcement was found to be 0.6B.The effect of adopting this value versus the other two depths was quantified.The single layer of geogrid had an effective reinforcement depth of 1.7B below the footing base.The increase of the depth between the topmost geogrid layer and the bottom of the footing(within the range of 0.9B)did not change the failure mode of the foundation.
文摘The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip footing upon both reinforced and unreinforced clayey slopes were presented.The objectives of this work are to:1) determine the influence of reinforcement on the bearing-capacity of the strip footings adjacent slopes,2) suggest an optimum number of reinforcement and 3) survey the effect of friction angle in clayey soils reinforced by geogrids.The investigations were carried out by varying the edge distance of the footing from slope.Also different numbers of geosynthetic layers were applied to obtaining the maximum bearing capacity and minimum settlement.To achieve the third objective,two different friction angles were used.The results show that the load?settlement behavior and ultimate bearing capacity of footing can be considerably improved by the inclusion of reinforcing layer.But using more than one layer reinforcement,the ultimate bearing capacity does not change considerably.It is also shown that for both reinforced and unreinforced slopes,the bearing capacity increases with an increase in edge distance.In addition,as the soil friction angle is increased,the efficiency of reinforcing reduces.
文摘From a financial point of view,urbanization frequently enforces the clients to construct superstructures near the slopes,giving rise to increasing the risk of building instability.By conducting a series of small-scale plate load tests,this work aims to investigate the effects of installing geotextile reinforcement layers in sandy slope and reducing the apex angle of triangular shell strip footings.The results show considerable effect of using geotextile-reinforced layers and decreasing the apex angle on the ultimate bearing capacity of shell foundations.With increasing foundation distance from the slope,the adverse effect of the slope is reduced.However,as the distance decreases,the effect of reinforcement and apex angle is increased.For practical applications,empirical equations are also presented for determining the ultimate bearing capacity of the footings and scale effect as well.Finally,3D numerical simulations are executed and compared with the experimental results.
