霍金的意义:上帝、外星人和世界的真实性

本文从新的视角考察了霍金最近发表的两条引起媒体极大兴趣的言论:关于宇宙是不是上帝创造的,关于我们要不要和外星文明交往,以及他另一个不太受关注的"依赖模型的实在论"观点,得出结论认为霍金在这些重要问题上其实并没有提供新的立场,只是完成了"站队",但由于他的"科学之神"的传奇身份和影响,霍金却能通过老生常谈为人类做出新的贡献。本文还认为,霍金的新作《大设计》可能是他最后的学术"遗嘱"。

Effects of Sulfur Fertilizer Application Methods on Grain Protein Content During Filling Stage of Winter Wheat

[ Objective] The experiment aimed to provide a theoretical base of optimal cultivation management for the high yield and good quality and high efficiency of winter wheat. [ Method] The effects of two sulfur fertilizer application methods on dynamic changes of grain protein content and glutenin content of Yumai 49 and Yumai 66 during wheat grain filling stage were studied under the field conditions. [Result] Both the grain protein and glutenin content of two cultivars were increased by sulfur fertilizer, particularly, the effects on Yumai 49 were more significant.[ Conclusion] The grain content and glutenin content of different wheat cultivars could be increased by taking different sulfur fertilizer application methods.

Parallel rapid relaxation inversion of 3D magnetotelluric data

We implement a parallel algorithm with the advantage of MPI （Message Passing Interface） to speed up the rapid relaxation inversion for 3D magnetotelluric data. We test the parallel rapid relaxation algorithm with synthetic and real data. The execution efficiency of the algorithm for several different situations is also compared. The results indicate that the parallel rapid relaxation algorithm for 3D magnetotelluric inversion is effective. This parallel algorithm implemented on a common PC promotes the practical application of 3D magnetotelluric inversion and can be suitable for the other geophysical 3D modeling and inversion.

书香

《大设计》 《大设计》是霍金在其《时间简史》之后最重要的著作。这本书的主题是理解生命、万物和宇宙的存在。它凝结了作者自《时间简史》出版之后20多年间，对科学和哲学的探索成果，以及对这些学科的未来展望。这本书是蒙洛迪诺协助完成的。

Large Dam Construction in China over the Past Fifty Years

This paper gives an introduction to the large dam construction achievements seen in China over the past fifty years. Four developmental stages, dam height and darn type, newly adopted and developing dam types are elaborated in detail, with large dam statistics completed and under construction attached as well.

Design of Tensile Strained InGaAsP/InGaAsP MQW for 1.55μm Polarization Independent Semiconductor Optical Amplifier

The theoretical optimization of tensile strained InGaAsP/InGaAsP MQW for 1.55μm windows polarization-independent semiconductor optical amplifier is reported.The valence-band structure of the MQW is calculated by using k·p method,in which 6×6 Luttinger effective-mass Hamiltonian is taken into account.The polarization dependent optical gain is calculated with various well width,strain,and carrier density.

English newspapers and magazines and the teaching of College English

Reading English newspapers and magazines is an effective way to help the students get the latest information worldwide and improve English levels. The present article first analyzes the features of the English newspapers and magazines and then proposes making good use of them through such classroom activities as discussing the hot issue and role-playing to provide more authentic situations in which the students can have chances to practice four English skills, achieving the ideal teaching result.

General design of Sutong Bridge

The main span of Sutong Bridge is a double-pylon,double-plane cable-stayed bridge with steel box girder,which has the world's longest central span of 1 088 m within cable-stayed bridges.To overcome problems caused by severe meteorological conditions,perplexing hydrological conditions,deep buried bedrock and higher navigation level,many new technics and methods were created.Keys including structural system,steel box girder,stayed cable,tower,pier,tower foundation,collision avoidance system,wind-resistance,seismic-resistance,structural nonlinear response and structural static stability were presented individually in this paper.

关于森林生态功能评价的探讨

森林生态功能是无形的，无法通过市场交换实现其价值，但是森林生态功能既有营林成本，又是营林收入，需要对其进行正确评价．该文就森林生态功能评价的意义、评价指标和评价方法做扼要论述，以朱亭小流域为例对森林涵养水源、保护土壤、纳碳释氧等生态功能进行评价，并对森林生态功能评价存在的问题提出几点看法。

Mechanical properties of porous titanium with different distributions of pore size

To satisfy the mechanical and biological requirement of porous bone substitutes, porous Ti with two different pore sizes designed in advance was fabricated by the space-holder sintering process. Mechanical properties of the porous Ti were explored via room temperature compressive tests. The pore sizes and shapes are uniform throughout the specimens with porosities ranging from 36% to 63%. The compression strength and the elastic modulus are in the range from 94.05 to 468.57 MPa and 2.662 to 18 GPa, respectively. It is worth noting that the relationship between the compressive strength and the porosities is completely linear relation beyond the effect of pore size distributions on the mechanical properties. The value of the constant C achieved from the Gibson-Ashby model suggests that the pore sizes affect the yield strength of the porous Ti and the values of density exponent （n） for porous Ti with two different pore sizes are higher than 2, which suggests that the deformation mode of the porous Ti with a porosity ranging from 36% to 63% is mainly buckling of the cell struts.

Study of large medical equipment allocation in Xuzhou

Objective: To investigate the allocation and management of large medical equipment (LME) in Xuzhou, Jiangsu Province, China, in order to make the best use of LME to meet the medical needs of local people. Methods: The research collected data from all hospitals that have LME in Xuzhou using questionnaire; 38 (97.4%) hospitals returned the questionnaire. Results: In Xuzhou, there are a total of 71 pieces of LME, each serving 126 600 people in an area of 163 km2. Sixty-two percent of them are allocated in urban areas, with Gini coefficient at 0.52, indicating imbalance and biased allocation of LME. Conclusion: The al- location of LME in Xuzhou is out of control and unfairly allocated.

On Disciplinary Orientation and Course Design of Vocabulary Teaching

This paper argues that the present vocabulary teaching needs reorienting so as to achieve a more systematic and principled vocabulary teaching suitable for China＇s non-English majors. The author then tries to propose a new model of vocabulary teaching, which consists of explicit instruction, incidental learning and strategy training.

Enhanced Production of Hybrid Extracellular β-Glucanase by Re-combinant Escherichia coli Using Experimental Design Method

A genetically engineered Escherichia coli JM109 harboring pLF3 was used to produce a hybrid ex-tracellular β-glucanase. Starting with enzyme production medium, glycerol and yeast extract combined with NaNO3 were screened to be the most suitable carbon and nitrogen source, respectively. Analysis of six components of the enzyme production medium by employing statistical optimization methods such as Plackett-Burman design and steepest ascent showed that yeast extract was the only significant variable and its best concentration for enzyme production was 12g·L-1. After optimization of the medium, 297.71U·ml-1 of β-glucanase activity in the medium and 352350U·g-1 of β-glucanase selectivity could be obtained, which were 14 and 72 folds higher than those ob-tained from original medium, respectively. Even higher enzyme activities were achieved by batch cultivations in a conventional stirred bioreactor on the optimized medium.

Design and research of gymnasium structure in Zhejiang University

This paper deals with the issues involved during the design of a complex gymnasium located at the new campus of Zhejiang University. The complexity comes from the gymnasium’s being of three parts: long-span membrane structure, prestressed concrete structure and extraordinarily long tubular steel structure without seams. The paper first presents considera- tions of the prestress design, followed by analyses of the stress states due to temperature changes and concrete shrinkage. Buckling and postbuckling analyses were performed to determine the load-carrying capacity of the perfect and imperfect tubular steel structure of the inclined arch system, while dynamic relaxation method and general nonlinear finite element analysis were used to carry out shape-finding and stress analyses of the membrane structure respectively. Finally, collated monitoring date was applied to control the construction quality and verify the design parameters. Some useful conclusions are available at the end of the paper.

AN INVESTIGATION OF RETINEX ALGORITHMS FOR IMAGE ENHANCEMENT

This letter introduces color constancy and Retinex theory for image enhancement.It clas- sifies Retinex algorithms into four categories and provides their principles and implementations in general.The experimental results of Frankle-McCann,MSR (Multi-Scale Retinex) and PNSD (Pro- jected Normalized Steepest Descent) Retinex algorithms are presented and compared.Moreover, variance and average gradient are proposed to evaluate the performance of the different algorithms.

Optimal Structural Design of the Midship of a VLCC Based on the Strategy Integrating SVM and GA

In this paper a hybrid process of modeling and optimization, which integrates a support vector machine （SVM） and genetic algorithm （GA）, was introduced to reduce the high time cost in structural optimization of ships. SVM, which is rooted in statistical learning theory and an approximate implementation of the method of structural risk minimization, can provide a good generalization performance in metamodeling the input-output relationship of real problems and consequently cuts down on high time cost in the analysis of real problems, such as FEM analysis. The GA, as a powerful optimization technique, possesses remarkable advantages for the problems that can hardly be optimized with common gradient-based optimization methods, which makes it suitable for optimizing models built by SVM. Based on the SVM-GA strategy, optimization of structural scantlings in the midship of a very large crude carrier （VLCC） ship was carried out according to the direct strength assessment method in common structural rules （CSR）, which eventually demonstrates the high efficiency of SVM-GA in optimizing the ship structural scantlings under heavy computational complexity. The time cost of this optimization with SVM-GA has been sharply reduced, many more loops have been processed within a small amount of time and the design has been improved remarkably.

Marine Structures: Future Trends and the Role of Universities

This paper emphasizes some of the challenges and trends associated with the future development of marine structures. Its main focus is on ways to improve the efficiency of energy-consuming ships, and on design challenges related to energy-producing offshore structures. This paper also discusses the analysis tools that are most needed to enable sustainable designs for future ships and offshore structures. The last section of the paper contains thoughts on the role of universities in education, research, and innovation regarding marine structures. It discusses curriculum requirements for maritime-technology education, basic research activities, and international cooperation.

Design and Construction of Composite Tubular Arches with Network Suspension System： Recent Undertakings and Trends

The use of Network hanger arrangement, a development of the classical Nielsen V-hanger system, in steel bowstring arch bridges allows for important steel saving, with very slender main elements, owing to the remarkable reduction of bending stresses in the arches and tie beams. The present paper describes the main features of the design and construction of several long-span arch bridges of this typology in Spain： the three pedestrian footbridges for the Madrid cycling ring track, with spans of 52, 60 and 80 m, the Bridge over River Deba in Guipuzcoa with a span of 110 m and Palma del Rio Bridge over River Guadalquivir in Cordoba, 130 m long. In all cases, two inclined arches linked at the crown were implemented, a very effective disposition to reduce the out-of-plane buckling length. The multiple crossings of the hanger system, consisting of prestressed bars in the case of Deba Bridge and the footbridges, and locked coil cables for Palma del Rio Bridge, were dealt with by means of crossing devices which led to a technically satisfactory solution with minimal visual impact. An innovative approach to bowstring arches was introduced in Valdebebas Bridge over M-12 motorway in Madrid, next to the new T-4 Terminal of Barajas Airport, with a span of 162 m, where the hangers are replaced by a structural steel mesh -diagrid- which acts as the web of a simply-supported beam whose compression head is the arch and the tie beam is the deck.

Design and construction of Sutong Bridge tower

Sutong Bridge tower which is 300.4 m is the highest one in the world.The tower anchor area uses the steel-concrete composite structure,its structure and the stress mechanism are complex,so it must be paid more attention to the structure durable issue.The 300 m height makes the tower quite sensitive to the environmental factors such as wind and temperature.The wind resistance safety of tower in construction stage is especially important.In this paper,the design of composite structure is introduced.The key technologies of tower geometry control and wind resistance in construction stage are analyzed.

Effects of site conditions on earthquake ground motion and their applications in seismic design in loess region

The Loess Plateau is an earthquake prone region of China, where the effects of loess deposit on ground motion were discovered during the 2008 Wenchuan earthquake(Ms8.0) and the 2013 Minxian-Zhangxian earthquake(Ms6.6). The field investigations, observations, and analyses indicated that large number of casualties and tremendous economic losses were caused not only by collapse and damage of houses with poor seismic performance, landslides, but also amplification effects of site conditions, topography and thickness of loess deposit, on ground motion. In this paper, we chose Dazhai Village and Majiagou Village as the typical loess site affected by the two earthquakes for intensity evaluation, borehole exploration, temporary strong motion array, micro tremor survey, and numerical analysis. The aim is to explore the relations between amplification factors and site conditions in terms of topography and thickness of loess deposit. We also developed site amplification factors of ground motion for engineering design consideration at loess sites. The results showed that the amplification effects are more predominant with increase in thickness of loess deposit and slope height. The amplification mayincrease seismic intensity by 1 degree, PGA and predominant period by 2 times, respectively.