Studies to date have failed to consider gage disc cutters’variable cutting depth and the constraints of cutter-head welds,and have ignored the coupling mechanism between the profile of the full-face rock tunnel-borin...Studies to date have failed to consider gage disc cutters’variable cutting depth and the constraints of cutter-head welds,and have ignored the coupling mechanism between the profile of the full-face rock tunnel-boring machine(TBM)cutter-head and the assembled radius layout of the disc cutters.To solve these problems,an adaptive design method for studying cutter layout was proposed.Taking the bearing stress of the outermost gage disc cutter as an index,the profile of the cutter-head was determined.Using a genetic algorithm and based on the principles of equal life and equal wear,the assembled radii of the cutters were optimally designed.Boundary conditions of non-interference between the cutters,manholes,muck buckets and welding lines were given when a star layout pattern was used on cutters.The cutter-head comprehensive evaluation model was established by adopting relative optimization improvement degree of evaluation indices to achieve dimensional consistency.Exemplifying the MB264-311-8030 mm tape TBM cutter-head,the calculations show that compared with the original layout scheme,among the 51 disc cutters,the largest gap of the cutters’assembled radiuses is only 25.8 mm,which is 0.64%of the cutter-head’s radius and is negligible.The cutter-head’s unbalanced radial force decreases by 62.41%,the overturning moment decreases by 33.22%,and the cutter group’s centroid shift increases by only 18.48%.Each index is better than or approximately equal to the original cutter-head layout scheme,and the equivalent stress and deformation are both smaller;these results fully verify the feasibility and effectiveness of the method.展开更多
Using data from the Cluster spacecraft from January 2003 to December 2004, we perform a statistical study on some properties of the field-aligned electron(FAE) events and interplanetary magnetic field(IMF) By dependen...Using data from the Cluster spacecraft from January 2003 to December 2004, we perform a statistical study on some properties of the field-aligned electron(FAE) events and interplanetary magnetic field(IMF) By dependence of FAE events with different durations in high-altitude polar regions. A total of 1335 FAE events were observed by the C3 spacecraft. More down-flowing events were observed in the Southern Hemisphere, and more up-flowing events were observed in the Northern Hemisphere. It proves that down-flowing events mainly originate from magnetosphere or solar wind and up-flowing events are mainly derived from ionosphere. Short-lifetime events showed a morning concentration in the magnetic local time distribution, and long-lifetime events were concentrated both before and after noon. For the IMF By dependence of the FAE events, short-lifetime events were much affected by IMF By and resulted in a morning concentration, while the long-lifetime events were almost unaffected by IMF By. With further analysis, we determined that the short-lifetime and long-lifetime events had different sources.展开更多
基金Projects(51275339,51575379,51675374)supported by the National Natural Science Foundation of ChinaProject(2013CB035402)supported by the National Hi-tech Research and Development Program of China
文摘Studies to date have failed to consider gage disc cutters’variable cutting depth and the constraints of cutter-head welds,and have ignored the coupling mechanism between the profile of the full-face rock tunnel-boring machine(TBM)cutter-head and the assembled radius layout of the disc cutters.To solve these problems,an adaptive design method for studying cutter layout was proposed.Taking the bearing stress of the outermost gage disc cutter as an index,the profile of the cutter-head was determined.Using a genetic algorithm and based on the principles of equal life and equal wear,the assembled radii of the cutters were optimally designed.Boundary conditions of non-interference between the cutters,manholes,muck buckets and welding lines were given when a star layout pattern was used on cutters.The cutter-head comprehensive evaluation model was established by adopting relative optimization improvement degree of evaluation indices to achieve dimensional consistency.Exemplifying the MB264-311-8030 mm tape TBM cutter-head,the calculations show that compared with the original layout scheme,among the 51 disc cutters,the largest gap of the cutters’assembled radiuses is only 25.8 mm,which is 0.64%of the cutter-head’s radius and is negligible.The cutter-head’s unbalanced radial force decreases by 62.41%,the overturning moment decreases by 33.22%,and the cutter group’s centroid shift increases by only 18.48%.Each index is better than or approximately equal to the original cutter-head layout scheme,and the equivalent stress and deformation are both smaller;these results fully verify the feasibility and effectiveness of the method.
基金supported by the National Natural Science Foundation of China(Grant Nos.4127414641474137 and 41374169)the Specialized Research Fund for State Key Laboratory in China
文摘Using data from the Cluster spacecraft from January 2003 to December 2004, we perform a statistical study on some properties of the field-aligned electron(FAE) events and interplanetary magnetic field(IMF) By dependence of FAE events with different durations in high-altitude polar regions. A total of 1335 FAE events were observed by the C3 spacecraft. More down-flowing events were observed in the Southern Hemisphere, and more up-flowing events were observed in the Northern Hemisphere. It proves that down-flowing events mainly originate from magnetosphere or solar wind and up-flowing events are mainly derived from ionosphere. Short-lifetime events showed a morning concentration in the magnetic local time distribution, and long-lifetime events were concentrated both before and after noon. For the IMF By dependence of the FAE events, short-lifetime events were much affected by IMF By and resulted in a morning concentration, while the long-lifetime events were almost unaffected by IMF By. With further analysis, we determined that the short-lifetime and long-lifetime events had different sources.
