The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency di...The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency disturbance dynamic uniaxial compression tests on coal specimens using a self-developed dynamic-static load coupling electro-hydraulic servo system,and studied the strength evolutions,surface deformations,acoustic emission(AE)characteristic parameters,and the failure modes of coal specimens with different static preloading levels were studied.The disturbance damage is positively correlated with the coal specimen static preload level.Specifically,the cumulative AE count rates of the initial accelerated damage stage for the coal specimens with static preloading level of 60%and 70%of the uniaxial compressive strength(UCS)were 2.66 and 3.19 times that of the 50%UCS specimens,respectively.Macroscopically,this behaviour manifested as a decrease in the compressive strength,and the mean strengths of the disturbance-damaged coal specimens with 60%and 70%of UCS static preloading decreased by 8.53%and 9.32%,respectively,compared to those of the specimens under pure static loading.The crack sources,such as the primary fissures,strongly control the dynamic response of the coal specimen.The difference between the dynamic responses of the coal specimens and that of dense rocks is significant.展开更多
Acoustic emission （AE） technique is a useful tool for investigating rock damage mechanism, and is used to study the temporal-spatial evolution process of microcracks during the similar pillar material experiment. A ...Acoustic emission （AE） technique is a useful tool for investigating rock damage mechanism, and is used to study the temporal-spatial evolution process of microcracks during the similar pillar material experiment. A combined AE location algorithm was developed based on the Least square algorithm and Geiger location algorithm. The pencil break test results show that the location precision can meet the demand of microcrack monitoring. The 3D location of AE events can directly reflect the process of initiation, propagation and evolutionary of microcracks. During the loading process, stress is much likely concentrated on the area between pillar and roof of the specimen, where belongs to danger zone of macroscopic failure. When rock reaches its plastic deformation stage, AE events begin to decrease, which indicates that AE quiet period can be seen as precursor characteristic of rock failure.展开更多
Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-ga...Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-gate type static induction transistor by conventional planar process technology is presented.Using this structure,it is successfully avoided the second epitaxy with a high degree of difficulty and the complicated mesa process in conventional buried gate.The experimental results demonstrate that this structure is desirable for application in power SIDs.Its advantages are high breakdown voltage and blocking gain.展开更多
Aim To determine numerically the field characteristics in the vied at the tip of a place crack growing steadily in a power-law hardening material. Meteods. Methods on the Euler mode and small-scale yield assumption, t...Aim To determine numerically the field characteristics in the vied at the tip of a place crack growing steadily in a power-law hardening material. Meteods. Methods on the Euler mode and small-scale yield assumption, the numerical results were given by nonlinear finite element analysis. Results The numerical results of the shape of the active plastic sone, the angular distribution of stresseses and Clack tip opening displacement (CTOD) in the vicinity at the hp of the steadily groWing CraCk are determined. Conclusion The comparison between the numerical results given by the present wort and those given by analytic asymptotic analysis shows that the present work reached a very high accuracy.展开更多
A novel into-plane rotating rnicromirror actuated by a hybrid electrostatic driving structure is presented. The hybrid driving structure is made up of a planar plate drive and a vertical comb drive. The device is fabr...A novel into-plane rotating rnicromirror actuated by a hybrid electrostatic driving structure is presented. The hybrid driving structure is made up of a planar plate drive and a vertical comb drive. The device is fabricated in SOI substrate by using a bulk-and-surface mixed silicon micromachining process. As demonstrated by experiment, the novel driving structure can actuate the mirror to achieve large-range continuous rotation as well as spontaneous 90°rotation induced by the pull-in effect. The continuous rotating range of the micromirror is increased to about 46° at an increased yielding voltage. The measured yielding voltages of the mirrors with torsional springs of 1 and 0.5μm in thickness are 390 - 410V and 140 - 160V, respectively. The optical insertion loss has also been measured to be --1.98dB when the mirror serves as an optical switch.展开更多
Objective： To compare the dose requirements of continuous infusion of rocuronium and atracurium throughout orthotopic liver transplantation （OLT） in humans. Methods： Twenty male patients undergoing liver transplan...Objective： To compare the dose requirements of continuous infusion of rocuronium and atracurium throughout orthotopic liver transplantation （OLT） in humans. Methods： Twenty male patients undergoing liver transplantation were randomly assigned to two comparable groups of 10 patients each to receive a continuous infusion of rocuronium or atracurium under intravenous balanced anesthesia. The response of adductor pollicis to train-of-four （TOF） stimulation of unlar nerve was monitored. The infusion rates of rocuronium and atracurium were adjusted to maintain Tl/Tc ratio of 2%-10%. The total dose of each drug given during each of the three phases of OLT was recorded. Results： Rocuronium requirement, which were （0.468±0.167）mg/（kg·h） during the paleohepatic phase, decreased significantly during the anhepatic phase to （0.303±0.134）mg/（kg·h） and returned to the initial values at the neohepatic period （（0.429±0.130） mg/（kg·h））; whereas atracuruim requirements remained unchanged during orthotopic liver transplantation. Conclusions： This study showed that the exclusion of the liver from the circulation results in the significantly reduced requirement of rocuronium while the requirement of atracurium was not changed, which suggests that the liver is of major importance in the clearance of rocuronium. A continuous infusion of atracurium with constant rate can provide stable neuromuscular blockade during the three stages of OLT.展开更多
The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entr...The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entry occurs with very short time interval, the viscosity and gravity of fluid were neglected. Considering the characteristic shape of it, the seafloor mining tool was simplified as a flat-bottom body. The governing equations were the Reynolds time-averaged equations and the k-e model. Finite element analysis was undertaken using the CFD software, Fluent. The impact pressures on the bottom of the mining tool were computed based on the improved volume of fuid method （VOF）. The pressure distribution, the maximum impact pressure, and the impact duration time during the water entry of mining tool are presented at various deploying velocities, the two peak pressures in the impact process are observed, and the relationship between the maximum impact pressure and the deploying velocity is obtained. The results are compared with those based on other prediction theories and methods.展开更多
Background： This preliminary study examined the effects of an 8-week supervised reactive balance training program on reaction time （RT） and foot speed, static balance and balance confidence in healthy older adults ...Background： This preliminary study examined the effects of an 8-week supervised reactive balance training program on reaction time （RT） and foot speed, static balance and balance confidence in healthy older adults compared to an exercise control group. Methods： Twenty-five older adults were randomly assigned to a reactive balance training group （QuickBoard; n = 12; 71.0 ± 8.6 years） or a stationary cycling group （control; n = 13; 70.2 ± 6.0 years）. Both groups were tested for foot RT foot speed, static balance, and balance confidence at baseline, 4-week, 8-week, and 4-week follow-up. Results： Results indicated significant improvements in QuickBoard foot RT and speed in both groups with greater improvements in the QuickBoard group. However, no group difference was found in static balance performance. Conclusion： Although the improvements in RT and foot speed may be beneficial for fall and trip prevention, the implications of the current findings for trio avoidance and oerformance of daily tasks are unclear.展开更多
A new approach is proposed to analyze the settlement behavior for single pile embedded in layered soils. Firstly, soil layers surrounding pile shaft are simulated by using distributed Voigt model, and finite soil laye...A new approach is proposed to analyze the settlement behavior for single pile embedded in layered soils. Firstly, soil layers surrounding pile shaft are simulated by using distributed Voigt model, and finite soil layers under the pile end are assumed to be virtual soil-pile whose cross-section area is the same as that of the pile shaft. Then, by means of Laplace transform and impedance function transfer method to solve the static equilibrium equation of pile, the analytical solution of the displacement impedance fimction at the pile head is derived. Furthermore, the analytical solution of the settlement at the head of single pile is theoretically derived by virtue of convolution theorem. Based on these solutions, the influences of parameters of soil-pile system on the settlement behavior for single pile are analyzed. Also, comparison of the load-settlement response for two well-instrumented field tests in multilayered soils is given to demonstrate the effectiveness and accuracy of the proposed approach. It can be noted that the presented solution can be used to calculate the settlement of single pile for the preliminary design of pile foundation.展开更多
To investigate the effects of pressure on the hot isostatic pressing(HIP) process of a stainless steel powder,density distribution and deformation of the powder at four different applied pressure levels were predicted...To investigate the effects of pressure on the hot isostatic pressing(HIP) process of a stainless steel powder,density distribution and deformation of the powder at four different applied pressure levels were predicted and compared by using finite element method(FEM).Constitutive relations of porous compacts during HIP process were derived based on the yield criterion of porous metal materials.Thermo-mechanical coupling calculations were carried out by the MSC.Marc.Densification mechanisms were studied through evolutions of relative density,equivalent plastic strain and equivalent viscoplastic strain rate for compacts.The simulation results were also compared with experimental data.The results show that the densification rate and final density of compacts increase dramatically with the increase in the applied pressure level when it is below 100 MPa during HIP process,and the creep for compacts evolves into steady stage with the improvement of density.展开更多
This article reasons that free-market capitalism produces peace in Don Quixote while its absence induces violence. Specifically, it shows readers： that when Don Quixote＇s characters inherit peace transpires but when...This article reasons that free-market capitalism produces peace in Don Quixote while its absence induces violence. Specifically, it shows readers： that when Don Quixote＇s characters inherit peace transpires but when they are extorted gore happens; that a modem salary causes peace in Don Quixote while a feudal Mercedes causes conflict; that when contracts are honored Don Quixote＇s characters are calm but when contracts are breached its＇ characters are violent; that figures in Don Quixote who work for a living are tranquil while those who do not work fight; that peaceful capitalism in Don Quixote is separate from, and better than, violent corsair anti-capitalism; thatCapitalism＇s profit motive does not cause slavery in Don Quixote but feudal suppression of human fi＇eedom does; that peaceful economic justice is adjudicated by civil judges, such as Sancho Panza, while bloody economic injustice is inflicted by either vigilantes （in Don Quixote＇s Case） or monarchical brutality （in the Holy Brotherhood＇s case）; and penultimately, that when the novel＇s financial disputes are decided by law courts peace ensues but when they are not violence happens.Finally, this article fmishes, by enumerating specific areas of future research on capitalism in Don Quixote. Scholars interested in Emre Gurgen＇s full scholarship, can visit his personal author website at www.don-quixote-explained.com展开更多
In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been teste...In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been tested in the towing tank of the LSMH of NTUA. During the tests the calm water resistance and the dynamic responses, including the added resistance in waves were recorded. Results referring to the resistance, the side force, the CG displacement, the pitch as well as the vertical accelerations of the model at the bow, the CG and the stern are presented. Moreover, by using a Velocity Prediction Program the polar and the stability diagram of the tested sailing yacht were calculated. Useful conclusions about the dynamic behavior of the model were obtained.展开更多
基金Projects(51925402,52334005,52304094)supported by the National Natural Science Foundation of ChinaProject(20201102004)supported by the Shanxi Science and Technology Major Project,China。
文摘The mechanical properties of residual coal pillars under the influence of upward mining disturbances significantly affect the safety of residual mining activities on working faces.This study conducted low-frequency disturbance dynamic uniaxial compression tests on coal specimens using a self-developed dynamic-static load coupling electro-hydraulic servo system,and studied the strength evolutions,surface deformations,acoustic emission(AE)characteristic parameters,and the failure modes of coal specimens with different static preloading levels were studied.The disturbance damage is positively correlated with the coal specimen static preload level.Specifically,the cumulative AE count rates of the initial accelerated damage stage for the coal specimens with static preloading level of 60%and 70%of the uniaxial compressive strength(UCS)were 2.66 and 3.19 times that of the 50%UCS specimens,respectively.Macroscopically,this behaviour manifested as a decrease in the compressive strength,and the mean strengths of the disturbance-damaged coal specimens with 60%and 70%of UCS static preloading decreased by 8.53%and 9.32%,respectively,compared to those of the specimens under pure static loading.The crack sources,such as the primary fissures,strongly control the dynamic response of the coal specimen.The difference between the dynamic responses of the coal specimens and that of dense rocks is significant.
基金Projects (2013BAB02B01, 2013BAB02B03) supported by the Key Projects in the National Science & Technoogy Pillar Program During the Twelfth Five-Year Plan PeriodProjects (51274055, 51204030, 51204031, 51109035) supported by the National Natural Science Foundation of ChinaProjects (N110301006, N110501001, N110401003) supportecd by the Fundamental Research Funds for the Central Unviersity, China
文摘Acoustic emission （AE） technique is a useful tool for investigating rock damage mechanism, and is used to study the temporal-spatial evolution process of microcracks during the similar pillar material experiment. A combined AE location algorithm was developed based on the Least square algorithm and Geiger location algorithm. The pencil break test results show that the location precision can meet the demand of microcrack monitoring. The 3D location of AE events can directly reflect the process of initiation, propagation and evolutionary of microcracks. During the loading process, stress is much likely concentrated on the area between pillar and roof of the specimen, where belongs to danger zone of macroscopic failure. When rock reaches its plastic deformation stage, AE events begin to decrease, which indicates that AE quiet period can be seen as precursor characteristic of rock failure.
文摘Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-gate type static induction transistor by conventional planar process technology is presented.Using this structure,it is successfully avoided the second epitaxy with a high degree of difficulty and the complicated mesa process in conventional buried gate.The experimental results demonstrate that this structure is desirable for application in power SIDs.Its advantages are high breakdown voltage and blocking gain.
文摘Aim To determine numerically the field characteristics in the vied at the tip of a place crack growing steadily in a power-law hardening material. Meteods. Methods on the Euler mode and small-scale yield assumption, the numerical results were given by nonlinear finite element analysis. Results The numerical results of the shape of the active plastic sone, the angular distribution of stresseses and Clack tip opening displacement (CTOD) in the vicinity at the hp of the steadily groWing CraCk are determined. Conclusion The comparison between the numerical results given by the present wort and those given by analytic asymptotic analysis shows that the present work reached a very high accuracy.
文摘A novel into-plane rotating rnicromirror actuated by a hybrid electrostatic driving structure is presented. The hybrid driving structure is made up of a planar plate drive and a vertical comb drive. The device is fabricated in SOI substrate by using a bulk-and-surface mixed silicon micromachining process. As demonstrated by experiment, the novel driving structure can actuate the mirror to achieve large-range continuous rotation as well as spontaneous 90°rotation induced by the pull-in effect. The continuous rotating range of the micromirror is increased to about 46° at an increased yielding voltage. The measured yielding voltages of the mirrors with torsional springs of 1 and 0.5μm in thickness are 390 - 410V and 140 - 160V, respectively. The optical insertion loss has also been measured to be --1.98dB when the mirror serves as an optical switch.
文摘Objective： To compare the dose requirements of continuous infusion of rocuronium and atracurium throughout orthotopic liver transplantation （OLT） in humans. Methods： Twenty male patients undergoing liver transplantation were randomly assigned to two comparable groups of 10 patients each to receive a continuous infusion of rocuronium or atracurium under intravenous balanced anesthesia. The response of adductor pollicis to train-of-four （TOF） stimulation of unlar nerve was monitored. The infusion rates of rocuronium and atracurium were adjusted to maintain Tl/Tc ratio of 2%-10%. The total dose of each drug given during each of the three phases of OLT was recorded. Results： Rocuronium requirement, which were （0.468±0.167）mg/（kg·h） during the paleohepatic phase, decreased significantly during the anhepatic phase to （0.303±0.134）mg/（kg·h） and returned to the initial values at the neohepatic period （（0.429±0.130） mg/（kg·h））; whereas atracuruim requirements remained unchanged during orthotopic liver transplantation. Conclusions： This study showed that the exclusion of the liver from the circulation results in the significantly reduced requirement of rocuronium while the requirement of atracurium was not changed, which suggests that the liver is of major importance in the clearance of rocuronium. A continuous infusion of atracurium with constant rate can provide stable neuromuscular blockade during the three stages of OLT.
基金Project(2006AA09Z240) supported by the National High Technology Research and Development Program of China Project(DYXM 115-04-02-01) supported by the National Deep-Sea Technology Program of Development and Research of the Eleventh Five-year Plan of China
文摘The hydrodynamic problem of a two-dimensional model of seafloor mining tool entering still water vertically at constant speed was analyzed based on the velocity potential theory. For the assumption that the water entry occurs with very short time interval, the viscosity and gravity of fluid were neglected. Considering the characteristic shape of it, the seafloor mining tool was simplified as a flat-bottom body. The governing equations were the Reynolds time-averaged equations and the k-e model. Finite element analysis was undertaken using the CFD software, Fluent. The impact pressures on the bottom of the mining tool were computed based on the improved volume of fuid method （VOF）. The pressure distribution, the maximum impact pressure, and the impact duration time during the water entry of mining tool are presented at various deploying velocities, the two peak pressures in the impact process are observed, and the relationship between the maximum impact pressure and the deploying velocity is obtained. The results are compared with those based on other prediction theories and methods.
文摘Background： This preliminary study examined the effects of an 8-week supervised reactive balance training program on reaction time （RT） and foot speed, static balance and balance confidence in healthy older adults compared to an exercise control group. Methods： Twenty-five older adults were randomly assigned to a reactive balance training group （QuickBoard; n = 12; 71.0 ± 8.6 years） or a stationary cycling group （control; n = 13; 70.2 ± 6.0 years）. Both groups were tested for foot RT foot speed, static balance, and balance confidence at baseline, 4-week, 8-week, and 4-week follow-up. Results： Results indicated significant improvements in QuickBoard foot RT and speed in both groups with greater improvements in the QuickBoard group. However, no group difference was found in static balance performance. Conclusion： Although the improvements in RT and foot speed may be beneficial for fall and trip prevention, the implications of the current findings for trio avoidance and oerformance of daily tasks are unclear.
基金Project(50879077) supported by the National Natural Science Foundation of China
文摘A new approach is proposed to analyze the settlement behavior for single pile embedded in layered soils. Firstly, soil layers surrounding pile shaft are simulated by using distributed Voigt model, and finite soil layers under the pile end are assumed to be virtual soil-pile whose cross-section area is the same as that of the pile shaft. Then, by means of Laplace transform and impedance function transfer method to solve the static equilibrium equation of pile, the analytical solution of the displacement impedance fimction at the pile head is derived. Furthermore, the analytical solution of the settlement at the head of single pile is theoretically derived by virtue of convolution theorem. Based on these solutions, the influences of parameters of soil-pile system on the settlement behavior for single pile are analyzed. Also, comparison of the load-settlement response for two well-instrumented field tests in multilayered soils is given to demonstrate the effectiveness and accuracy of the proposed approach. It can be noted that the presented solution can be used to calculate the settlement of single pile for the preliminary design of pile foundation.
基金Project(2007AA03Z115) supported by the National High Technology Research and Development Program of ChinaProject(2009ZX04005-041-03) supported by the National Science and Technology Major Program of ChinaProject(2010MS046) supported by the Independent Fund of Huazhong University of Science and Technology,China
文摘To investigate the effects of pressure on the hot isostatic pressing(HIP) process of a stainless steel powder,density distribution and deformation of the powder at four different applied pressure levels were predicted and compared by using finite element method(FEM).Constitutive relations of porous compacts during HIP process were derived based on the yield criterion of porous metal materials.Thermo-mechanical coupling calculations were carried out by the MSC.Marc.Densification mechanisms were studied through evolutions of relative density,equivalent plastic strain and equivalent viscoplastic strain rate for compacts.The simulation results were also compared with experimental data.The results show that the densification rate and final density of compacts increase dramatically with the increase in the applied pressure level when it is below 100 MPa during HIP process,and the creep for compacts evolves into steady stage with the improvement of density.
文摘This article reasons that free-market capitalism produces peace in Don Quixote while its absence induces violence. Specifically, it shows readers： that when Don Quixote＇s characters inherit peace transpires but when they are extorted gore happens; that a modem salary causes peace in Don Quixote while a feudal Mercedes causes conflict; that when contracts are honored Don Quixote＇s characters are calm but when contracts are breached its＇ characters are violent; that figures in Don Quixote who work for a living are tranquil while those who do not work fight; that peaceful capitalism in Don Quixote is separate from, and better than, violent corsair anti-capitalism; thatCapitalism＇s profit motive does not cause slavery in Don Quixote but feudal suppression of human fi＇eedom does; that peaceful economic justice is adjudicated by civil judges, such as Sancho Panza, while bloody economic injustice is inflicted by either vigilantes （in Don Quixote＇s Case） or monarchical brutality （in the Holy Brotherhood＇s case）; and penultimately, that when the novel＇s financial disputes are decided by law courts peace ensues but when they are not violence happens.Finally, this article fmishes, by enumerating specific areas of future research on capitalism in Don Quixote. Scholars interested in Emre Gurgen＇s full scholarship, can visit his personal author website at www.don-quixote-explained.com
文摘In this paper the performance of a BOC-50＇ sailing yacht model in calm water and in realistic sea states is investigated experimentally. A scaled model of the hull form with the keel-bulb configuration has been tested in the towing tank of the LSMH of NTUA. During the tests the calm water resistance and the dynamic responses, including the added resistance in waves were recorded. Results referring to the resistance, the side force, the CG displacement, the pitch as well as the vertical accelerations of the model at the bow, the CG and the stern are presented. Moreover, by using a Velocity Prediction Program the polar and the stability diagram of the tested sailing yacht were calculated. Useful conclusions about the dynamic behavior of the model were obtained.
