NUMERICAL ANALYSIS OF FLOW CHARACTERISTICS IN BLOCKING OF THE YANGTZ RIVER OF THE TGP

Some novel techniques of computational fluid dynamics are used to establish a mathematical model for the open diversion channel with two embankments in river blocking.The technique of boundary fitted coordinate system is used to overcome the difficulties resulting from the complicated shapes of natural river boundaries;the method of alternating direction implicit finite difference scheme is used to solve the partial differential equations in the transformed plane;and the technique of moving boundary is used to deal with the river bed exposed to water surface.This model has been used to predict the flow characteristics in the blocking of the Yangtz river in the Three Gorge Project (TGP).Comparison between the computed and experimental data shows a satisfactory agreement.

Decomposition patterns of leaf litter of seven common canopy species in a subtropical forest： dynamics of mineral nutrients

Dynamical patterns of mineral elements during decomposition processes were investigated for seven common canopy species in a subtropical evergreen broad-leaved forest by means of litterbag technique over 2 years. The species studied are representative for the vegetation in the study area and differed significantly in chemical qualities of their litter. No significant relationships were found between decomposition rate （percentage dry mass remaining and decomposition constant k） and initial element cuncentrations.However, there were significant correlations betweeu the percentage of dry mass remaining and the mineral element concentrations in the remaining litter for most cases. The rank of the element mobility in decomposition process was as follows： Na = K 〉 Mg ≥ Ca 〉 N ≥ Mn ≥ Zn ≥ P 〉 Cu 〉〉 Al 〉〉 Fe. Concentrations of K and Na decreased in all species as decomposition proceeded. Calcium and Mg also decreased in concentrntion but with a temporal increase in the initial phase of decomposition, while the concentrations of other elements （Zn, Cu, AL and Fei increased for all species with exception of Mn which revealed a different pattern in different species. In most species, microelements （Cu, Al, and Fe） significantly increased in absolute amounts at the end of the litterbag incubation, which could be ascribed to a lange extent to the mechanism of abiotic fixation to humic substances rather than biological immobilization.

THE PHASE-OFFSET OVERLAPPED WAVE TECHNIQUE

A new digital communication technology based on the Phase-Offset Overlapped Waves (POOW) has been introduced in this letter. The waves can be considered as a special multicarrier different from traditional ones. The sub-waves in a coded word's period of the POOW are sine waves and have the same frequencies, but different starting phases. The most important characteristic is that these sub-waves are the piecewise functions and not orthogonal in a code word period. The decoding can be implemented by solving a linear equation group. This code has very high efficiency and thus the data transmission rate is increased greatly.

The Optimal Cross-section Design of the “Trapezoid-V” Shaped Drainage Canal of Viscous Debris Flow

Debris flow drainage canal is one of the most widely used engineering measures to prevent and manage debris flow hazards.The shape and the sizes of the cross-section are important parameters when design debris flow drainage canal.Therefore,how to design the appropriate shape and sizes of the cross-section so that the drainage canal can have the optimal drainage capacity is very important and few researched at home and abroad.This study was conducted to analyze the hydraulic condition of a Trapezoid-V shaped drainage canal and optimize its cross-section.By assuming characteristic sizes of the cross-section,the paper deduced the configuration parameter of the cross-section of a Trapezoid-V shaped debris flow drainage canal.By theory analysis,it indicates that the optimal configuration parameter is only related to the side slope coefficient and the bottom transverse slope coefficient.For this study,the Heishui Gully,a first-order tributary of the lower Jinsha River,was used as an example to design the optimal cross-section of the drainage canal of debris flow.

Numerical Study on Flow-induced Noise for a Steam Stop-valve Using Large Eddy Simulation

The noise induced by the fluctuant saturated steam flow under 250 °C in a stop-valve was numerically studied.The simulation was carried out using computational fluid dynamics（CFD） and ACTRAN.The acoustic field was investigated with Lighthill＇s acoustic analogy based on the properties of the flow field obtained using a large-eddy simulation that employs the LES-WALE dynamic model as the sub-grid-scale model.Firstly,the validation of mesh was well conducted,illustrating that two million elements were sufficient in this situation.Secondly,the treatment of the steam was deliberated,and conclusions indicate that when predicting the flow-induced noise of the stop-valve,the steam can be treated as incompressible gas at a low inlet velocity.Thirdly,the flow-induced noises under different inlet velocities were compared.The findings reveal it has remarkable influence on the flow-induced noises.Lastly,whether or not the heat preservation of the wall has influence on the noise was taken into account.The results show that heat preservation of the wall had little influence.

Submanifolds with Parallel Mean Curvacture

In this paper, we consider a class of submanifolds with parallel mean curvacture vector fields. We obitain the suffitient conditions that the above submanifolds is of tatall umbilical and that its codimension is decrease.

Effects of a flexible net barrier on the dynamic behaviours and interception of debris flows in mountainous areas

Flexible net barriers are a new type of effective mitigation measure against debris flows in valleys and can affect the kinematic energy and mass of debris flows. Here, ten flume tests were performed to study the dynamic behaviours of debris flows with differences in volumes, concentrations(solid volume fraction), and travel distances after interception by a uniform flexible net barrier. A high-speed camera was used to monitor the whole test process, and their dynamic behaviours were recorded. A preliminary computational framework on energy conversion is proposed according to the deposition mechanisms and outflow of debris flow under the effects of the flexible net barrier. The experimental results show that the dynamic interaction process between a debris flow and the flexible net barrier can be divided into two stages:(a) the two-phase impact of the leading edge of the debris flow with the net and(b) collision and friction between the body of the debris flow and intercepted debris material. The approach velocity of a debris flow decreases sharply(a maximum of 63%) after the interception by the net barrier, and the mass ratio of the debris material being intercepted and the kinetic energy ratio of the debris material being absorbed by the net barrier are close due to the limited interception efficiency of the flexible net barrier, which is believed to be related to the flexibility. The energy ratio of outflow is relative small despite the large permeability of the flexible net barrier.

Effect of pumping chamber on performance of non-overload centrifugal pump

In order to specify the characteristics of un-overloaded centrifugal pumps, the IH100-65-200 pump was chosen as the model pump. Different calculation models for centrifugal pumps were established under different pumping chamber sectional parameters. In the numerical simulation of the centrifugal pumps flow field, the shaft power, head, efficiency, and the changes of the internal flow field under different sectional areas and sectional shapes were studied with the RNG k-ε turbulence model, and the influence of the pumping chamber section characteristics of the non-overloaded centrifugal pumps were analyzed. The results show that sectional areas have a significant impact on the non-overload characteristics of centrifugal pumps. The shaft power and head of centrifugal pump are increasing with a lager sectional area, by which the gradient of head curves decreases. The efficiency is improved under a large flow rate condition, but the head and the efficiency are reduced at a small flow rate. It is also observed that the sectional shapes have less influence on the shaft power, the hydraulic performance and flow field characteristics of a centrifugal pump.

The Influence of Generated Pulses Parameters on the Thyratron in the Inductive Energy Storage

Experimental research of anode current and anode voltage influence on the speed of decaying plasma resistance change and the time ofthyratron cutoff. Anode current resistance increase is shown to cause thyratron cutoff time increase in case of fixed anode voltage. In turn anode voltage increase in case of fixed anode current causes earlier increase of decaying plasma resistance growth speed and quicker apparatus cutoff：

Active earth pressure for subgrade retaining walls in cohesive backfills with tensile strength cut-off subjected to seepage effects

The commonly used Mohr-Coulomb(M-C) failure condition has a limitation that it overestimates the tensile strength of cohesive soils. To overcome this limitation, the tensile strength cut-off was applied where the predicted tensile strength is reduced or eliminated. This work then presented a kinematical approach to evaluate the active earth pressure on subgrade retaining walls in cohesive backfills with saturated seepage effects. An effective rotational failure mechanism was constructed assuming an associative flow rule. The impact of seepage forces, whose distribution is described by a closed-form solution, was incorporated into the analysis. The thrust of active earth pressure was derived from the energy conservation equation, and an optimization program was then coded to obtain the most critical solution. Several sets of charts were produced to perform a parameter analysis. The results show that taking soil cohesion into account has a distinct beneficial influence on the stability of retaining walls, while seepage forces have an adverse effect. The active earth pressure increases when tensile strength cut-off is considered, and this increment is more noticeable under larger cohesion.

An improved CFD model of gas flow and particle interception in a fiber material

An improved CFD model of gas flow and particle interception in a fiber material which fiber size is Y-shape was developed in this work. The porous medium model was used to build the model of the whole size of fiber filter medium. Mixture model was adopted. The algorithm of particle interception in the whole size of fiber filter medium was derived and UDF(User Defined Function) that described kinds of particle filtering mechanisms in filter fibrous media was added to the Fluent default conservation equation as source term for simulation. The inertial resistance of the filter was taken into consideration, which provided a more precise measurement of the smoke flow and the particle interception in the filter under higher smoke speed conditions. The commercial software, Fluent 6.3, was used to simulate the smoke flow and particle interception in the filter in a single suction. The velocity and pressure profiles of smoke or nicotine particle in the filter, as well as nicotine particle volume fraction profile were well simulated. Finally, the comparisons of nicotine particle filtration efficiency between Fluent simulation results in this work and experimental results, as well as the model prediction in the literature were made to validate the simulation model. The comparisons showed that the particle entrapment model from simulation results was in good agreement with that from the experimental results. In addition, the Fluent simulation results are closer to reality both at the beginning and the end of the smoke process comparing with the model predicted results in the literature.

Simulation of the mixing process in a straight tube with sudden changed cross-section

In this work, we revised the expression of mixing intensity to describe the mixing output through a cross section in a flow system by considering heterogeneity of flow field, and carefully investigated the mixing process along a straight tube with expanding/contracting cross section by simulation method. The simulation results show that a sudden expansion of cross section has remarkable mixing intensification effect within a limited period(on the sub-second scale) or tube-length(on the millimeter scale), corresponding to the generation of considerable local vortices determined by both the flow capacity and the ratio of cross section change; a sudden contraction of cross section has instantaneous but weak mixing intensification effect; through introducing a local expansion structure with proper length, as the combination of sudden expansion and sudden contraction, their mixing intensification effects could be superposed. Besides, the rationality and importance are experimentally verified to explore the time profile of mixing intensity and carry out the vortex analysis by simulation for enhancing the selectivity of a complicated reaction system. These progresses may lead to more meaningful quantitative description of mixing process in a flow microreactor for some specific chemical processes.

Noise Shielding Using Acoustic Metamaterials

We exploit theoretically a class of rectangular cylindrical devices for noise shielding by using acoustic metamateriais. The function of noise shielding is justified by both the far-field and near-field full-wave simulations based on the finite element method. The enlargement of equivalent acoustic scattering cross sections is revealed to be the physical mechanism for this function. This work makes it possible to design a window with both noise shielding and air flow.

Research and Measurement of Synchrotron Radiation System for HLS

The paper introduces the synchrotron radiation system for Hefei Light Source (HLS),which includes the streak camera system,the bunch length system using photoelectric method,the beam profile measurement system,and the photon beam position measurement system.The bunch length and bunch lengthening were measured using the streak camera system and the photoelectric method.The beam profile measurement system was used to observe the suppression effects of sextupole on beam transverse instability and the feedback effects of the transverse bunch-by-bunch feedback system.The photon beam position measurement system used two wire-type monitors and the logarithmic signal processor,which was used to detect the beam motions.

C~∞ Compactness for a Class of Riemannian Manifolds with Parallel Ricci Curvature

In this paper we prove that tile set of Riemannian manifolds with parallel Ricci curvature, lower bounds for sectional curvature and injectivity radius and a upper bound for volume is coo compact in Gromov-Hausdroff topology. As an application we also prove a pinching result which states that a Ricci flat manifold is flat under certain conditions.

A HOPF INDEX THEOREM FOR A REAL VECTOR BUNDLE

The authors generalize the works in [5] and [6] to prove a Hopf index theorem associated to a smooth section of a real vector bundle with non-isolated zero points.

A differentiable sphere theorem with positive Ricci curvature and reverse volume pinching

Let Mn be a compact, simply connected n (≥3)-dimensional Riemannian manifold without bound-ary and Sn be the unit sphere Euclidean space Rn+1. We derive a differentiable sphere theorem whenever themanifold concerned satisfies that the sectional curvature KM is not larger than 1, while Ric(M)≥n+2 4 and the volume V (M) is not larger than (1 + η)V (Sn) for some positive number η depending only on n.

Experimental Study on Shock Wave Structures in Constant-area Passage of Cold Spray Nozzle

Cold spray is a technique to make a coating on a wide variety of mechanical or electric parts by spraying solid particles accelerated through a high-speed gas flow in a converging-diverging nozzle. In this study, pseudo-shock waves in a modeled cold spray nozzle as well as high-speed gas jets are visualized by schlieren technique. The schlieren photographs reveals the supersonic flow with shock train in the nozzle. Static pressure along the barrel wall is also measured. The location of the head of pseudo-shock wave and its pressure distribution along the nozzle wall are analytically explained by using a formula of pseudo-shock wave. The analytical results show that the supersonic flow accompanying shock wave in the nozzle should be treated as pseudo-shock wave instead of normal shock wave.

The Effect of Heating Direction on Flow Boiling Heat Transfer of R134a in Microchannels

This paper presents effects of heating directions on heat transfer performance of R134 a flow boiling in micro-channel heat sink. The heat sink has 30 parallel rectangular channels with cross-sectional dimensions of 500mm width 500mm depth and 30 mm length. The experimental operation condition ranges of the heat flux and the mass flux were 13.48 to 82.25 W/cm^2 and 373.3 to 1244.4 kg/m^2 s respectively. The vapor quality ranged from 0.07 to 0.93. The heat transfer coefficients of top heating and bottom heating both were up to 25 k W/m^2 K. Two dominate transfer mechanisms of nucleate boiling and convection boiling were observed according to boiling curves. The experimental results indicated that the heat transfer coefficient of bottom heating was 13.9% higher than top heating in low heat flux, while in high heat flux, the heat transfer coefficient of bottom heating was 9.9%.higher than the top heating, because bubbles were harder to divorce the heating wall. And a modified correlation was provided to predict heat transfer of top heating.