从《朱子语类》到《日程》--宋元理学家对唐宋古文经典谱系的建构

宋元以降,以“大家”为中心的唐宋古文经典谱系逐渐形成,朱熹一脉的宋元理学家强调先后次第的读书法厥功至伟。语录体的《朱子语类》初步建构了以韩愈-欧阳修-曾巩一系为主要脉络并旁及柳宗元、苏轼等作家的唐宋古文经典谱系。程端礼的“工程体”读书法类著作《日程》尤其强调王安石古文的地位,将其归入韩愈-欧阳修-曾巩一系,直接影响了明初朱右《唐宋六家文衡》之编纂,对“唐宋八大家”的定型不无开启之功。唐宋古文经典谱系是理学思想、科举制度及文章写作合力下的结果,深刻影响了宋元士人的思想世界。

试论《程氏家塾读书分年日程》的性质

《程氏家塾读书分年日程》在元代以来的古代汉语文教育中虽产生了相当深广的影响,但该书仅涉及到汉语教与学,并无其他语言的教学情况与学校的教育活动,甚至仅就汉语教学而言,也无规定以学习汉语言文字为特征的儒学教育方面的课外活动。因此,不能将其简单地认定为产生于元代的课程表,或教学计划之类的古代教育文献,而应以秉承朱子读书之法为宗旨的基本理念、以研习汉语言文字为中心的教学运用、以传承儒家文化为己任的教育目的等特征,将其定性为产生于元代的一部较为完备的汉语文教学大纲或课程标准。

Effects of Greenbelts in Different Variety under Solar Thermal Radiation on Temperature Reduction

[Objective] The aim was to study on effects of greenbelts in different varieties on temperature drop under solar thermal radiation. [Method] In residential regions, effects of temperature reduction by five varieties of greenbelts （megaphanerophyte, dungarunga, shrub, herbaceous plant and bare land） and changing rules with days under the same solar thermal radiation were researched. [Result] Greenbelts＇ temperature changed with intensity of solar thermal radiation, among which greenbelt of megaphanerophyte absorbed, transfered and reflected thermal radiation through crown canopy. Temperature of underlying surface was reduced accordingly, where correlation between underlying surface＇s temperature and solar thermal radiation （R） was 0.156 and the temperature declined by 1.9 ℃. In contrast, correlation of temperature of underlying surface （of lawn） with solar thermal radiation （R） was as high as 0.820, but the temperature only declined by 0.6℃. [Conclusion] The established linear relationship between crown＇s temperature and air temperature actually provides references for temperature measurement of greenbelts at scale.

Mechanical analysis of transmission lines based on linear sliding cable element

In order to study the sliding characteristics when the cable structures are connected with other rods, a string of sliding cable dements （SCE） consisting of one active threenode SCE passing through the sliding point and multiple inactive two-node SCEs is put forward. Based on the updated Lagrangian formulation, the geometric nonlinear stiffness matrix of the three-node straight sliding cable dement is deduced. The examples about two-span and three-span continuous cable structures are studied to verify the effectiveness of the derived SCE. Comparing the cable tension of SCE with the existing research results, the calculating results show that the error is less than 1%. The sliding characteristics should be considered in practical engineering because of the obvious difference between the cable tension of the SCE and that of the cable element without considering sliding characteristics.

Interpretation of 850 hPa Temperature in Temperature Forecast of Jiamusi Area

Based on the initial field temperature data of ECMWF 850 hPa from Jan- uary 2012 to December 2015, linear interpolation method of ECMWF was employed to calculate the 850 hPa temperature values at 8：00 and 20：00 of 7 stations （Jiamusi, Tangyuan, Huachuan, Huanan, Fujin, Tongjiang, Fuyuan）. Combined with the observed daily minimum and maximum air temperatures at the same time of the 7 stations, the correlations of the 850 hPa temperature values at 8：00 and 20：00 with the daily maximum or minimum air temperature of the ground meteorological obser- vation stations were established, and the ground observation data in accordance with the relevant analysis and correlation test principle of the prediction equation for factor were primarily selected. Regression method was used to establish forecast e- quation dividing into counties, month by month. The results showed that the 850 hPa temperature values at 8：00 and 20：00 were significantly correlated with the daily maximum or minimum air temperature, and the established temperature fore- cast equation was of certain guiding significance for the forecast of daily minimum and maximum temperature, which could help to improve the forecast accuracy.

Noether Symmetry of Three-Order Lagrangian Equations

Based on the three-order Lagrangian equation, pseudo-Hamilton actoon I^＊ is defined and the three-order Hamilton＇s principle and the conditions are obtained in the paper. Then, the Noether symmetry about three-order Lagrangian equations is deduced. Finally, an example is given to illustrate the application of the result.

Lie Symmetry and Conserved Quantity of Three-Order Lagrangian Equations for Non-conserved Mechanical System

Based on the infinitesimal and one parameter transformation, the problem of Lie symmetry of three-order Lagrangian equations has been studied. Under Lie transformation, the sufficient and necessary condition which keeps three-order Lagrangian equations to be unchanged and the invariant are obtained in this paper.

Integrating Factors and Conservation Theorems of Lagrangian Equations for Nonconservative Mechanical System in Generalized Classical Mechanics

The conservation theorems of the generalized Lagrangian equations for nonconservative mechanical system are studied by using method of integrating factors. Firstly, the differential equations of motion of system are given, and the definition of integrating factors is given. Next, the necessary conditions for the existence of the conserved quantity are studied in detail. Finally, the conservation theorem and its inverse for the system are established, and an example is given to illustrate the application of the result.

Dynamic analysis of double racks gear 3D roll forming machine

3 D roll-forming for high strength steel sheets is a new technology at present.Double racks gear 3D roll forming machine developed by our research group can be used to perform variable cross section roll forming for high strength steel.In the paper,a dynamic model of 8-DOF double rack gear 3D roll-forming machine is established by the method of Lagrange equation.The expression of the angle acceleration of the system response is obtained by solving the dynamic equations.Through an actual engineering example,the dynamical characters of the 3D roll forming machine are revealed.The results can support the design of 3D roll forming machine.Meanwhile,the research will play an active role in the development of control system.

Higher-Order Lagrangian Equations of Higher-Order Motive Mechanical System

In this paper, if the condition of variation δt = 0 is satisfied, the higher-order Lagrangian equations and higher-order Hamilton＇s equations, which show the consistency with the results of traditional analytical mechanics, are obtained from the higher-order Lagrangian equations and higher-order Hamilton＇s equations. The results can enrich the theory of analytical mechanics.

3D Multiphase Piecewise Constant Level Set Method Based on Graph Cut Minimization

Segmentation of three-dimensional(3D) complicated structures is of great importance for many real applications.In this work we combine graph cut minimization method with a variant of the level set idea for 3D segmentation based on the Mumford-Shah model.Compared with the traditional approach for solving the Euler-Lagrange equation we do not need to solve any partial differential equations.Instead,the minimum cut on a special designed graph need to be computed.The method is tested on data with complicated structures.It is rather stable with respect to initial value and the algorithm is nearly parameter free.Experiments show that it can solve large problems much faster than traditional approaches.

Dynamic analysis of new type elastic screen surface with multi degree of freedom and experimental validation

A feasible method was proposed to improve the vibration intensity of screen surface via application of a new type elastic screen surface with multi degree of freedom(NTESSMDF). In the NTESSMDF, the primary robs were coupled to the main screen structure with ends embedded into the elastomers, and the secondary robs were attached to adjacent two primary robs with elastic bands. The dynamic model of vibrating screen with NTESSMDF was established based on Lagrange's equation and the equivalent stiffnesses of the elastomer and elastic band were calculated. According to numerical simulation using the 4th order Runge-Kutta method, the vibration intensity of screen surface can be enhanced substantially with an averaged acceleration amplitude increasing ratio of 72.36%. The primary robs and secondary robs vibrate inversely in steady state, which would result in the friability of materials and avoid stoppage. The experimental results validate the dynamic characteristics with acceleration amplitude rising by62.93% on average, which demonstrates the feasibility of NTESSMDF.

Path-tracking Control of a Tractor-aircraft System

An aircraft tractor plays a significant role as a kind of important marine transport and support equipment. It＇s necessary to study its controlling and manoeuvring stability to improve operation efficiency. A virtual prototyping model of the tractor-aircraft system based on Lagrange＇s equation of the first kind with Lagrange mutipliers was established in this paper, According to the towing characteristics, a path-tracking controller using fuzzy logic theory was designed. Direction control herein was carried out through a compensatory tracking approach. Interactive co-simulation was performed to validate the path-tracking behavior in closed-loop, Simulation results indicated that the tractor followed the reference courses precisely on a flat ground.

Workflow logs analysis system for enterprise performance measurement

Workflow logs that record the execution of business processes offer very valuable data resource for real-time enterprise performance measurement. In this paper, a novel scheme that uses the technology of data warehouse and OLAP to explore workflow logs and create complex analysis reports for enterprise performance measurement is proposed. Three key points of this scheme are studied: 1) the measure set; 2) the open and flexible architecture for workflow logs analysis system; 3) the data models in WFMS and data warehouse. A case study that shows the validity of the scheme is also provided.

Assessment of noise and ground vibration induced during blasting operations in an open pit mine——A case study on Ewekoro limestone quarry,Nigeria

Our study was carried out to assess the level of noise generated and ground vibrations induced during blasting operations at the Ewekoro limestone quarry in Nigeria.To achieve this objective,vibro monitor equipment was used to take readings related to noise generated and ground vibrations during all blasting operations that took place in the quarry for a period of one month.As well,a digital camera was used to take photographs of residential structures within villages near the quarry.The results obtained indicate that the ground vibration readings fall between 0.5 mm/s and 2.1 mm/s and the noise generated during the blasting operations between 82 dB and 89 dB.These readings when compared with the limits set by FEPA(Federal Environmental Protection Agency) of 5.0 mm/s and 150 dB) all fall within the permissible limits.However the photographs of most structures near the quarry reveal cracks and dilapidated building walls.Recommendations are made on how to sustain and improve current blasting techniques.

Principles and practices of training for soccer

The complexity of the physical demands of soccer requires the completion of a multi-component training programme. The development, planning, and implementation of such a programme are difficult due partly to the practical constraints related to the competitive schedule at the top level. The effective planning and organisation of training are therefore crucial to the effective delivery of the training stimulus for both individual players and the team. The aim of this article is to provide an overview of the principles of training that can be used to prepare players for the physical demands of soccer. Information relating to periodisation is supported by an outline of the strategies used to deliver the acute training stress in a soccer environment. The importance of monitoring to support the planning process is also reviewed.

An Improved Model for Computing-Intensive Tasks on Heterogeneous Workstations

An improved algorithm, which solves cooperative concurrent computing tasks using the idle cycles of a number of high performance heterogeneous workstations interconnected through a high-speed network, was proposed. In order to get better parallel computation performance, this paper gave a model and an algorithm of task scheduling among heterogeneous workstations, in which the costs of loading data, computing, communication and collecting results are considered. Using this efficient algorithm, an optimal subset of heterogeneous workstations with the shortest parallel executing time of tasks can be selected.

A Genetic Algorithm for Single Machine Scheduling with Fuzzy Processing Time and Multiple Objectives

In this paper, by considering the fuzzy nature of the data in real-life problems, single machine scheduling problems with fuzzy processing time and multiple objectives are formulated and an efficient genetic algorithm which is suitable for solving these problems is proposed. As illustrative numerical examples, twenty jobs processing on a machine is considered. The feasibility and effectiveness of the proposed method have been demonstrated in the simulation.

Computational Modeling of Tangentially Fired Boiler (I) Models, Flow Field and Temperature Profiles

In this work, an Eulerian/Lagrangian approach has been employed to investigate numerically the flow characteristics, heat transfer and combustion in a tangentially fired furnace. The RNG (Re-normalization group) k-ε model and a new method for cell face velocity interpolation based on a non-staggered grid system are employed. To avoid pseudo-diffusion that is significant in modeling tangentially fired furnaces, attempts are made at improving the differential volume scheme. Some new developments on turbulent diffusion of particles are also taken into account. Thus, computational accuracy is improved substantially.

Meetings

Events Calendar 2009January 12-15, 2009 Hyatt Regency San Francisco, San Francisco, CA Mouse Models of Cancer