A wideband monolithic optoelectronic integrated receiver with a high-speed photo-detector,completely compatible with standard CMOS processes,is designed and implemented in 0.6μm standard CMOS technology.The experimen...A wideband monolithic optoelectronic integrated receiver with a high-speed photo-detector,completely compatible with standard CMOS processes,is designed and implemented in 0.6μm standard CMOS technology.The experimental results demonstrate that its performance approaches applicable requirements,where the photo-detector achieves a -3dB frequency of 1.11GHz,and the receiver achieves a 3dB bandwidth of 733MHz and a sensitivity of -9dBm for λ=850nm at BER=10-12.展开更多
A three-transistor active pixel sensor and its double sampling readout circuit implemented by a switch capacitor amplifier are designed. The circuit is embedded in a 64 × 64 pixel array CMOS image sensor and succ...A three-transistor active pixel sensor and its double sampling readout circuit implemented by a switch capacitor amplifier are designed. The circuit is embedded in a 64 × 64 pixel array CMOS image sensor and success-fully taped out with a Chartered 0.35μm process. The pixel pitch is 8μm × 8μm with a fill factor of 57%, the photo-sensitivity is 0.8V/（lux · s） ,and the dynamic range is 50dB. Theoretical analysis and test results indicate that as the process is scaled down, a smaller pixel pitch reduces the sensitivity. A deep junction n-well/p-substrate photodiode with a reasonable fill factor and high sensitivity are more appropriate for submicron processes.展开更多
The analysis and calculating method of dynamic errors of CMMs during probing are discussed.To relate the dynamic displacement errors with the dynamic rotational errors a method for obtaining the displacement errors at...The analysis and calculating method of dynamic errors of CMMs during probing are discussed.To relate the dynamic displacement errors with the dynamic rotational errors a method for obtaining the displacement errors at the probing position from dynamic rotational errors is presented.It is pointed out that the finite element method might be used for modeling dynamic errors.However,dynamic errors are difficult to be modeled so a combined practical and theoretical approach is needed.In addition,the dynamic errors are measured with inductive position sensors.展开更多
A limiting amplifier (LA) IC implemented in TSMC standard 0.25μm CMOS technology is described.Active inductor loads and direct-coupled technology are employed to increase the gain,broaden the bandwidth,reduce the pow...A limiting amplifier (LA) IC implemented in TSMC standard 0.25μm CMOS technology is described.Active inductor loads and direct-coupled technology are employed to increase the gain,broaden the bandwidth,reduce the power dissipation,and keep a tolerable noise performance.Under a 3.3V supply voltage,the LA core achieves a gain of 50-dB with a power consumption below 40mW.The measured input sensitivity of the amplifier is better than 5m V _ pp .It can operate at bit rates up to 7Gb/s with an rms jitter of 0.03 UI or less.The chip area is only 0.70mm×0.70mm.According to the measurement results,this IC is expected to work at the standard bit rate levels of 2.5,3.125,and 5Gb/s.展开更多
An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noi...An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noise and stability of the active inductor are explained. The filter was fabricated in 0.18μm CMOS technolo- gy,and the circuit occupied an active area of only 150μm ×200μm. Measurement results show that the filter centered at 2. 44GHz with about 60MHz bandwidth （3dB） is tunable in center frequency from about 2.07 to 2. 44GHz. The ldB compression point is - 15dBm while consuming 10. 8mW of DC power,and a maximum quality factor of 103 is attained at the center frequency of 2.07GHz.展开更多
A rectangular finite element for laminated plate with bonded and/or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory. The elemen...A rectangular finite element for laminated plate with bonded and/or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory. The element has four-node, 20-degrees-of-freedom with one potential degree of freedom for each piezoelectric layer to represent the piezoelectric behavior. The higher order derivation of deflection is obtained by using the normal rotation expressions to take the effects of transverse shear deformation into considerations. The finite element can accurately simulate the deformation of both thin and moderately thick plates. A Fortran program is written and a number of benchmark tests are exercised to verify its effectiveness. Results are compared well with the existing data. The unbalanced composite with piezoelectric layers is then analyzed by using the model. Results show that the changes of the ratio between the thickness of positive angle layers and the negative angle layers have an effect on the deformation of the structure under the same electric loading.展开更多
Electromagnetic holographic data are characterized by two modes, suggesting that image reconstruction requires a dual-mode sensitivity field as well. We analyze an electromagnetic holographic field based on tomography...Electromagnetic holographic data are characterized by two modes, suggesting that image reconstruction requires a dual-mode sensitivity field as well. We analyze an electromagnetic holographic field based on tomography theory and Radon inverse transform to derive the expression of the electromagnetic holographic sensitivity field （EMHSF）. Then, we apply the EMHSF calculated by using finite-element methods to flow simulations and holographic imaging. The results suggest that the EMHSF based on the partial derivative of radius of the complex electric potential φ is closely linked to the Radon inverse transform and encompasses the sensitivities of the amplitude and phase data. The flow images obtained with inversion using EMHSF better agree with the actual flow patterns. The EMHSF overcomes the limitations of traditional single-mode sensitivity fields.展开更多
A heuristic metric is presented to achieve the optimal connected set covering problem （SCP） in sensor networks. The coverage solution with the energy efficiency can guarantee that all targets are fully covered. Amon...A heuristic metric is presented to achieve the optimal connected set covering problem （SCP） in sensor networks. The coverage solution with the energy efficiency can guarantee that all targets are fully covered. Among targets, the crucial ones are redundantly covered to ensure more reliable monitors. And the information collected by the above coverage solution can be transmitted to Sink by the connected data-gathering structure. A novel ant colony optimization （ACO） algorithm--improved-MMAS-ACS-hybrid algorithm （IMAH） is adopted to achieve the above metric. Based on the design of the heuristic factor, artificial ants can adaptively detect the coverage and energy status of sensor networks and find the low-energy-cost paths to keep the communication connectivity to Sink. By introducing the pheromone-judgment-factor and the evaluation function to the pheromone updating rule, the pheromone trail on the global-best solution is enhanced, while avoiding the premature stagnation. Finally, the energy efficiency set can be obtained with high coverage-efficiency to all targets and reliable connectivity to Sink and the lifetime of the connected coverage set is prolonged.展开更多
Metabolic changes in rats with photochemically induced cerebral infarction and the effects of batroxobin were investigated 1, 3, 5 and 7 days after infarction by means of magnetic resonance imaging (MRI), 1H- and 31P-...Metabolic changes in rats with photochemically induced cerebral infarction and the effects of batroxobin were investigated 1, 3, 5 and 7 days after infarction by means of magnetic resonance imaging (MRI), 1H- and 31P-magnetic resonance spectroscopy (MRS). A region of T2 hyperintensity was observed in left temporal neocortex in infarction group and batroxobin group 1, 3, 5 and 7 days after infarction. The volume of the region gradually decreased from 1 day to 7 days after infarction. The ratio of NAA/Cho + Cr in the region of T2 hyperintensity in the infarction group was significantly lower than that in the corresponding region in the sham-operated group 3, 5 and 7 days after infarction respectively (P展开更多
This paper presents a low noise, 1.25Gb/s and 124dBΩ front-end amplifier that is designed and fabricated in 0.25μm CMOS technology for optical communication applications. Active inductor shunt peaking technology and...This paper presents a low noise, 1.25Gb/s and 124dBΩ front-end amplifier that is designed and fabricated in 0.25μm CMOS technology for optical communication applications. Active inductor shunt peaking technology and noise optimization are used in the design of a trans-impedance amplifier,which overcomes the problem of inadequate bandwidth caused by the large parasitical capacitor of the CMOS photodiode. Experimental results indicate that with a parasitical capacitance of 2pF,this circuit works at 1.25Gb/s. A clear eye diagram is obtained with an input optical signal of - 17dBm. With a power supply of 3.3V, the front-end amplifier consumes 122mW and provides a 660mV differential output.展开更多
A single CMOS image sensor based on a 0.35μm process along with its design and implementation is introduced. The architecture of an active pixel sensor is used in the chip. The fill factor of a pixel cell can reach 4...A single CMOS image sensor based on a 0.35μm process along with its design and implementation is introduced. The architecture of an active pixel sensor is used in the chip. The fill factor of a pixel cell can reach 43%,higher than the traditional factor of 30%. Moreover, compared with the conventional method whose fixed pattern noise （FPN） is around 0.5%, a dynamic digital double sampling technique is developed, which possesses simpler circuit architecture and a better FPN suppression outcome. The CMOS image sensor chip is implemented in the 0.35μm mixed signal process of a Chartered by MPW. The experimental results show that the chip operates welt,with an FPN of about 0.17%.展开更多
Gastric fundic gland polyps(FGPs) are common nonadenomatous gastric polyps arising from normal fundic mucosa without Helicobacter pylori(H. pylori) infection. Although systemic FGPs associated with familial adenomatou...Gastric fundic gland polyps(FGPs) are common nonadenomatous gastric polyps arising from normal fundic mucosa without Helicobacter pylori(H. pylori) infection. Although systemic FGPs associated with familial adenomatous polyposis(FAP) often have dysplasia, there are few reports of dysplasia occurring in sporadic F G P s, e s p e c i a l l y w h e n d e t e c t e d b y m a g n i f y i n g endoscopy with narrow band imaging(ME-NBI). We experienced two cases of adenocarcinoma occurring in sporadic FGPs, and their ME-NBI findings were very useful for differentiating FGP with cancer from nondysplastic FGP. A 68-year-old man and a 63-year-old woman were referred to our institution for medical checkup. H. pylori was negative in both patients. Endoscopic examination revealed a small reddishpolypoid lesion on the anterior wall of the upper gastric body and several FGPs. ME-NBI showed an irregular microvascular architecture composed of closed loop- or open loop-type vascular components, plus an irregular microsurface structure composed of oval-type surface components which was different from that of FGPs. FAP was denied because of the absence of colon polyps and no familial history of FAP. Pathological diagnosis was adenocarcinoma occurring in sporadic FGP.展开更多
文摘A wideband monolithic optoelectronic integrated receiver with a high-speed photo-detector,completely compatible with standard CMOS processes,is designed and implemented in 0.6μm standard CMOS technology.The experimental results demonstrate that its performance approaches applicable requirements,where the photo-detector achieves a -3dB frequency of 1.11GHz,and the receiver achieves a 3dB bandwidth of 733MHz and a sensitivity of -9dBm for λ=850nm at BER=10-12.
文摘A three-transistor active pixel sensor and its double sampling readout circuit implemented by a switch capacitor amplifier are designed. The circuit is embedded in a 64 × 64 pixel array CMOS image sensor and success-fully taped out with a Chartered 0.35μm process. The pixel pitch is 8μm × 8μm with a fill factor of 57%, the photo-sensitivity is 0.8V/（lux · s） ,and the dynamic range is 50dB. Theoretical analysis and test results indicate that as the process is scaled down, a smaller pixel pitch reduces the sensitivity. A deep junction n-well/p-substrate photodiode with a reasonable fill factor and high sensitivity are more appropriate for submicron processes.
文摘The analysis and calculating method of dynamic errors of CMMs during probing are discussed.To relate the dynamic displacement errors with the dynamic rotational errors a method for obtaining the displacement errors at the probing position from dynamic rotational errors is presented.It is pointed out that the finite element method might be used for modeling dynamic errors.However,dynamic errors are difficult to be modeled so a combined practical and theoretical approach is needed.In addition,the dynamic errors are measured with inductive position sensors.
文摘A limiting amplifier (LA) IC implemented in TSMC standard 0.25μm CMOS technology is described.Active inductor loads and direct-coupled technology are employed to increase the gain,broaden the bandwidth,reduce the power dissipation,and keep a tolerable noise performance.Under a 3.3V supply voltage,the LA core achieves a gain of 50-dB with a power consumption below 40mW.The measured input sensitivity of the amplifier is better than 5m V _ pp .It can operate at bit rates up to 7Gb/s with an rms jitter of 0.03 UI or less.The chip area is only 0.70mm×0.70mm.According to the measurement results,this IC is expected to work at the standard bit rate levels of 2.5,3.125,and 5Gb/s.
文摘An RF bandpass filter with a Q-enhancement active inductor is presented. The design technique for a tunable Q-enhancement CMOS active inductor operating in the wide RF-band is described. Moreover,issues related to noise and stability of the active inductor are explained. The filter was fabricated in 0.18μm CMOS technolo- gy,and the circuit occupied an active area of only 150μm ×200μm. Measurement results show that the filter centered at 2. 44GHz with about 60MHz bandwidth （3dB） is tunable in center frequency from about 2.07 to 2. 44GHz. The ldB compression point is - 15dBm while consuming 10. 8mW of DC power,and a maximum quality factor of 103 is attained at the center frequency of 2.07GHz.
文摘A rectangular finite element for laminated plate with bonded and/or embedded piezoelectric sensors and actuators is developed based on the variational principle and the first order shear deformation theory. The element has four-node, 20-degrees-of-freedom with one potential degree of freedom for each piezoelectric layer to represent the piezoelectric behavior. The higher order derivation of deflection is obtained by using the normal rotation expressions to take the effects of transverse shear deformation into considerations. The finite element can accurately simulate the deformation of both thin and moderately thick plates. A Fortran program is written and a number of benchmark tests are exercised to verify its effectiveness. Results are compared well with the existing data. The unbalanced composite with piezoelectric layers is then analyzed by using the model. Results show that the changes of the ratio between the thickness of positive angle layers and the negative angle layers have an effect on the deformation of the structure under the same electric loading.
基金supported by the National Science and Technology Major Project(No.2011ZX05020-006)
文摘Electromagnetic holographic data are characterized by two modes, suggesting that image reconstruction requires a dual-mode sensitivity field as well. We analyze an electromagnetic holographic field based on tomography theory and Radon inverse transform to derive the expression of the electromagnetic holographic sensitivity field （EMHSF）. Then, we apply the EMHSF calculated by using finite-element methods to flow simulations and holographic imaging. The results suggest that the EMHSF based on the partial derivative of radius of the complex electric potential φ is closely linked to the Radon inverse transform and encompasses the sensitivities of the amplitude and phase data. The flow images obtained with inversion using EMHSF better agree with the actual flow patterns. The EMHSF overcomes the limitations of traditional single-mode sensitivity fields.
文摘A heuristic metric is presented to achieve the optimal connected set covering problem （SCP） in sensor networks. The coverage solution with the energy efficiency can guarantee that all targets are fully covered. Among targets, the crucial ones are redundantly covered to ensure more reliable monitors. And the information collected by the above coverage solution can be transmitted to Sink by the connected data-gathering structure. A novel ant colony optimization （ACO） algorithm--improved-MMAS-ACS-hybrid algorithm （IMAH） is adopted to achieve the above metric. Based on the design of the heuristic factor, artificial ants can adaptively detect the coverage and energy status of sensor networks and find the low-energy-cost paths to keep the communication connectivity to Sink. By introducing the pheromone-judgment-factor and the evaluation function to the pheromone updating rule, the pheromone trail on the global-best solution is enhanced, while avoiding the premature stagnation. Finally, the energy efficiency set can be obtained with high coverage-efficiency to all targets and reliable connectivity to Sink and the lifetime of the connected coverage set is prolonged.
文摘Metabolic changes in rats with photochemically induced cerebral infarction and the effects of batroxobin were investigated 1, 3, 5 and 7 days after infarction by means of magnetic resonance imaging (MRI), 1H- and 31P-magnetic resonance spectroscopy (MRS). A region of T2 hyperintensity was observed in left temporal neocortex in infarction group and batroxobin group 1, 3, 5 and 7 days after infarction. The volume of the region gradually decreased from 1 day to 7 days after infarction. The ratio of NAA/Cho + Cr in the region of T2 hyperintensity in the infarction group was significantly lower than that in the corresponding region in the sham-operated group 3, 5 and 7 days after infarction respectively (P
文摘This paper presents a low noise, 1.25Gb/s and 124dBΩ front-end amplifier that is designed and fabricated in 0.25μm CMOS technology for optical communication applications. Active inductor shunt peaking technology and noise optimization are used in the design of a trans-impedance amplifier,which overcomes the problem of inadequate bandwidth caused by the large parasitical capacitor of the CMOS photodiode. Experimental results indicate that with a parasitical capacitance of 2pF,this circuit works at 1.25Gb/s. A clear eye diagram is obtained with an input optical signal of - 17dBm. With a power supply of 3.3V, the front-end amplifier consumes 122mW and provides a 660mV differential output.
文摘A single CMOS image sensor based on a 0.35μm process along with its design and implementation is introduced. The architecture of an active pixel sensor is used in the chip. The fill factor of a pixel cell can reach 43%,higher than the traditional factor of 30%. Moreover, compared with the conventional method whose fixed pattern noise （FPN） is around 0.5%, a dynamic digital double sampling technique is developed, which possesses simpler circuit architecture and a better FPN suppression outcome. The CMOS image sensor chip is implemented in the 0.35μm mixed signal process of a Chartered by MPW. The experimental results show that the chip operates welt,with an FPN of about 0.17%.
文摘Gastric fundic gland polyps(FGPs) are common nonadenomatous gastric polyps arising from normal fundic mucosa without Helicobacter pylori(H. pylori) infection. Although systemic FGPs associated with familial adenomatous polyposis(FAP) often have dysplasia, there are few reports of dysplasia occurring in sporadic F G P s, e s p e c i a l l y w h e n d e t e c t e d b y m a g n i f y i n g endoscopy with narrow band imaging(ME-NBI). We experienced two cases of adenocarcinoma occurring in sporadic FGPs, and their ME-NBI findings were very useful for differentiating FGP with cancer from nondysplastic FGP. A 68-year-old man and a 63-year-old woman were referred to our institution for medical checkup. H. pylori was negative in both patients. Endoscopic examination revealed a small reddishpolypoid lesion on the anterior wall of the upper gastric body and several FGPs. ME-NBI showed an irregular microvascular architecture composed of closed loop- or open loop-type vascular components, plus an irregular microsurface structure composed of oval-type surface components which was different from that of FGPs. FAP was denied because of the absence of colon polyps and no familial history of FAP. Pathological diagnosis was adenocarcinoma occurring in sporadic FGP.
