The model test of seismic simulation shaking table is an important method to study the seismic design of bridge structure. In order to evaluate the seismic response and dynamic characteristics of pile-water-pier syste...The model test of seismic simulation shaking table is an important method to study the seismic design of bridge structure. In order to evaluate the seismic response and dynamic characteristics of pile-water-pier system for developing more reliable design procedures, shaking table model tests of a submerged bridge pier system, including pile groups-cap-pier and inertia mass, were conducted. Since different similitude laws corresponding to different test objectives affected the validity of test results, the similitude law with the aim to consider the effect of hydrodynamic pressure was proposed and confirmed through an actual example. Based on the test results, the effect of water around model on seismic response under seismic excitation input was analyzed and the failure level was judged by observing the variation of basic frequency. The test results indicate that the transfer function of analytical model with water is different from that without water, the natural frequency without water is always higher than that with water, and the first modal shapes are various. It is also concluded that the similitude law is suitable for practical application and the dynamic characteristics and seismic response of the structure system can be changed because of the existence of the surrounding water, which should be paid much attention in the further investigation.展开更多
Three-dimensional(3D) circular loom is a textile machine to produce 3D tubular fiber composites reinforcement.The shedding wheels system is an important part of 3D circular loom to schedule the shedding order which ha...Three-dimensional(3D) circular loom is a textile machine to produce 3D tubular fiber composites reinforcement.The shedding wheels system is an important part of 3D circular loom to schedule the shedding order which has several types.A computer aided design system is proposed,which is implemented in SolidWorks,and provides a tool for practicing designers to design the sheddling wheel system more efficiently.展开更多
The production of some seedless table grapes under tropical conditions presents low bud fertility on the main canes and low yield, which leads to the need of pruning in the lateral shoots. The objective of this study ...The production of some seedless table grapes under tropical conditions presents low bud fertility on the main canes and low yield, which leads to the need of pruning in the lateral shoots. The objective of this study was to evaluate the influence of the canopy management for the formation of lateral shoots associated with dellsity of canes on the yield and quality of grapes ＂Sugraone＂ in the Sao Francisco Valley. The experiment was carried out over two growing seasons （2011-2012） in a commercial vineyard of Sugraone in Petrolina, Pernambuco state, Brazil. The treatments consisted of two canopy managements （shoot topping associated to elimination of lateral shoots and shoot topping and formation of lateral shoots） combined with two to three densities of canes after pruning （1.8, 2.8 and 3.8 canes/m^2）. The formation of ＂lateral shoots＂ increased yield and number of clusters per plant during two consecutive growing seasons, besides using 2.8 varas/m^2 resulted in highest yields only in 2011 growing season. The variables mass bunch, mass berry, soluble solids （SS）, soluble sugar, titxatable acidity （TA） and pulp firmness were not affected by treatments, while the attributes related to color, as like brightness and hue angle of the skin, and total extractable polyphenols content were influenced by canopy management, especially in the 2012 growing season. Shoot topping to induce formation of laterals shoots associated with density of 2.8 canes/m2 increased the yield of seedless grapes cultivar Sugraone grown in the Sao Francisco Valley, not significantly affecting the quality of the grape.展开更多
基金National Basic Research Program of China ("973" Program,No.2011CB013605-4)National Natural Science Foundation of China(No.51178079)Major Program of National Natural Science Foundation of China (No.90915011)
文摘The model test of seismic simulation shaking table is an important method to study the seismic design of bridge structure. In order to evaluate the seismic response and dynamic characteristics of pile-water-pier system for developing more reliable design procedures, shaking table model tests of a submerged bridge pier system, including pile groups-cap-pier and inertia mass, were conducted. Since different similitude laws corresponding to different test objectives affected the validity of test results, the similitude law with the aim to consider the effect of hydrodynamic pressure was proposed and confirmed through an actual example. Based on the test results, the effect of water around model on seismic response under seismic excitation input was analyzed and the failure level was judged by observing the variation of basic frequency. The test results indicate that the transfer function of analytical model with water is different from that without water, the natural frequency without water is always higher than that with water, and the first modal shapes are various. It is also concluded that the similitude law is suitable for practical application and the dynamic characteristics and seismic response of the structure system can be changed because of the existence of the surrounding water, which should be paid much attention in the further investigation.
文摘Three-dimensional(3D) circular loom is a textile machine to produce 3D tubular fiber composites reinforcement.The shedding wheels system is an important part of 3D circular loom to schedule the shedding order which has several types.A computer aided design system is proposed,which is implemented in SolidWorks,and provides a tool for practicing designers to design the sheddling wheel system more efficiently.
文摘The production of some seedless table grapes under tropical conditions presents low bud fertility on the main canes and low yield, which leads to the need of pruning in the lateral shoots. The objective of this study was to evaluate the influence of the canopy management for the formation of lateral shoots associated with dellsity of canes on the yield and quality of grapes ＂Sugraone＂ in the Sao Francisco Valley. The experiment was carried out over two growing seasons （2011-2012） in a commercial vineyard of Sugraone in Petrolina, Pernambuco state, Brazil. The treatments consisted of two canopy managements （shoot topping associated to elimination of lateral shoots and shoot topping and formation of lateral shoots） combined with two to three densities of canes after pruning （1.8, 2.8 and 3.8 canes/m^2）. The formation of ＂lateral shoots＂ increased yield and number of clusters per plant during two consecutive growing seasons, besides using 2.8 varas/m^2 resulted in highest yields only in 2011 growing season. The variables mass bunch, mass berry, soluble solids （SS）, soluble sugar, titxatable acidity （TA） and pulp firmness were not affected by treatments, while the attributes related to color, as like brightness and hue angle of the skin, and total extractable polyphenols content were influenced by canopy management, especially in the 2012 growing season. Shoot topping to induce formation of laterals shoots associated with density of 2.8 canes/m2 increased the yield of seedless grapes cultivar Sugraone grown in the Sao Francisco Valley, not significantly affecting the quality of the grape.
