A digital predistorted class-F power amplifier (PA) using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access ( WC...A digital predistorted class-F power amplifier (PA) using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access ( WCDMA ) applications. Measurement results with the continuous wave (CW) signals indicate that the designed class-F PA achieves a peak power-added efficiency (PAE) of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio (ACPR) of the designed PA after digital predistortion (DPD) decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio (PAPR). The drain efficiency (DE) of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.展开更多
Proximal point algorithms (PPA) are attractive methods for solving monotone variational inequalities (MVI). Since solving the sub-problem exactly in each iteration is costly or sometimes impossible, various approx...Proximal point algorithms (PPA) are attractive methods for solving monotone variational inequalities (MVI). Since solving the sub-problem exactly in each iteration is costly or sometimes impossible, various approximate versions ofPPA (APPA) are developed for practical applications. In this paper, we compare two APPA methods, both of which can be viewed as prediction-correction methods. The only difference is that they use different search directions in the correction-step. By extending the general forward-backward splitting methods, we obtain Algorithm Ⅰ; in the same way, Algorithm Ⅱ is proposed by spreading the general extra-gradient methods. Our analysis explains theoretically why Algorithm Ⅱ usually outperforms Algorithm Ⅰ. For computation practice, we consider a class of MVI with a special structure, and choose the extending Algorithm Ⅱ to implement, which is inspired by the idea of Gauss-Seidel iteration method making full use of information about the latest iteration. And in particular, self-adaptive techniques are adopted to adjust relevant parameters for faster convergence. Finally, some numerical experiments are reported on the separated MVI. Numerical results showed that the extending Algorithm II is feasible and easy to implement with relatively low computation load.展开更多
Based on the teleseismic waveform data recorded by 82 permanent broadband stations in Guangdong Province and its adjacent areas including Fujian, Jiangxi, Hunan, Guangxi, Hainan and Taiwan, we calculate body wave rece...Based on the teleseismic waveform data recorded by 82 permanent broadband stations in Guangdong Province and its adjacent areas including Fujian, Jiangxi, Hunan, Guangxi, Hainan and Taiwan, we calculate body wave receiver functions under all stations, and obtain the crustal thickness and average Poisson's ratio beneath all stations by the H-K stacking-search method of receiver function. The results show that the crustal thickness with an average thickness of 29. 5km in Guangdong Province and its adjacent areas ranges between 26. 8km and 33. 6kin and gradually thins from northwest to southeast. The crustal thickness in the Zhujiang Delta, western Guangdong, Nanning and Nan'ao areas is relatively thinner and ranges between 25. 0km and 28. 0km. The minimum crustal thickness is about 26km beneath Wengtian, Hainan and the Zhanjiang zone and Shangchuan Island in Guangdong. The crustal thickness in the zones of Mingxi, Fujian and Yongzhou, Hunan is thicker and varies between 31.0km and 34.0km. The distribution of Poisson's ratio in our study region ranges between 0.20 and 0. 29. Poisson's ratios in Southeast Hainan, the coastal areas of East Guangdong and West Fujian and the South Jiangxi have distinctly higher values than in others. It suggests that the various geothermal fields located in these areas have high heat flow values. The distribution of crustal thickness and Poisson's ratio has an obvious block feature and may be related to the distribution of faults and historical earthquakes.展开更多
The car sequencing problem(CSP)concerns a production sequence of different types of cars in the mixed-model assembly line.A hybrid algorithm is proposed to find an assembly sequence of CSP with minimum violations.Firs...The car sequencing problem(CSP)concerns a production sequence of different types of cars in the mixed-model assembly line.A hybrid algorithm is proposed to find an assembly sequence of CSP with minimum violations.Firstly,the hybrid algorithm is based on the tabu search and large neighborhood search(TLNS),servicing as the framework.Moreover,two components are incorporated into the hybrid algorithm.One is the parallel constructive heuristic(PCH)that is used to construct a set of initial solutions and find some high quality solutions,and the other is the small neighborhood search(SNS)which is designed to improve the new constructed solutions.The computational results show that the proposed hybrid algorithm(PCH+TLNS+SNS)obtains100best known values out of109public instances,among these89instances get their best known values with100%success rate.By comparing with the well-known related algorithms,computational results demonstrate the effectiveness,efficiency and robustness of the proposed algorithm.展开更多
We collected waveforms of a teleseismic event which occurred from January 2007 to October 2011 from 174 broadband seismic stations deployed in Hebei and its adjacent areas. Using the H-k stacking method,the average th...We collected waveforms of a teleseismic event which occurred from January 2007 to October 2011 from 174 broadband seismic stations deployed in Hebei and its adjacent areas. Using the H-k stacking method,the average thickness and Poisson's ratio of the crust are acquired. In order to obtain reliable receiver functions, the broadband seismograms of 488 teleseismic earthquakes occurring in the epicentral distance range from 30° to 90° with magnitudes larger than Mb6. 0 are collected. The results show that crustal thickness have conspicuous lateral heterogeneity and have good correlation to the regional geological tectonic features. Poisson ratio's value is equated with the global models estimates which fluctuate at about 0. 25. Crustal thickness has positive correlation to the topography and the Taihang Mountains form the transition zone of thick and thin crustal thickness. There is an obvious difference in crustal thickness beneath the north and south of the Shanxi earthquake zone and the Poisson ratio of Datong,Ningwu and Anze basins is greater than 0. 3. The crustal thickness beneath the Zhang-Bo( Zhangjiakou-Bohai Sea)earthquake zone decreases from west to north and its Poisson ratio shows conspicuous lateral heterogeneity. The thin crust and low Poisson ratio in the Huabei( North China)basin may correlate with the delamination of the North China craton.展开更多
This paper demonstrates the design and fabrication of a monolithic HBT power amplifier for TD-SCDMA cellu- lar phones that achieves high efficiency and linearity. The two-stage MMIC integrates the input matching circu...This paper demonstrates the design and fabrication of a monolithic HBT power amplifier for TD-SCDMA cellu- lar phones that achieves high efficiency and linearity. The two-stage MMIC integrates the input matching circuits,interstage matching circuits, and active bias circuits in a single chip with size as small as 0.91mm × 0.98mm. The amplifier obtains a power-added efficiency of 43% (15%) and a gain of 28.5dB (24dB) at the high and low operation mode under the 3.4V supply. In addition, the adjacent channel leakage power is below - 45dBc/- 56dBc and - 39dBc/- 50dBc at 1.6MHz/3.2MHz offset in low and high power output modes, respectively, with QPSK modulation. The MMIC offers the potential for low cost production due to small chip size, stable voltage supply, and high performance at the same time.展开更多
The Cenozoic uplift of Qilian Mountains is critical to comprehend the uplift and extension of the Tibet Plateau as well as the formation of the first and second steps in China's topography. This study summarized d...The Cenozoic uplift of Qilian Mountains is critical to comprehend the uplift and extension of the Tibet Plateau as well as the formation of the first and second steps in China's topography. This study summarized dynamic stratigraphic realm comprehensively on the basis of stratigraphic correlation of different Cenozoic sedimentary basin regions of the Qilian Mountains and adjacent mountains. This facilitated the re-creation of the tectonic-sedimentary evolutionary process of the Qilian Mountains and their surrounding areas. The results indicate that during the Early Paleogene(Paleocene-Eocene), the Qilian Mountains were part of an uplift realm. During the Oligocene, Guide-Xining-Lanzhou-Linxia sag basin at the northern margin of the West Qinling Mountains came into being and was subjected to sedimentation. The Suli Basin located between the North and South Qilian paleo-uplifts began to form and undergo sedimentation. Intracontinental orogenic extrusion and basin detachment occurred at the Qilian Mountains during the Miocene, which caused successive uplifts of various mountains, including the Laji, South Qinghai,Jishi, Liupan, and South Shule Mountains. Until Pliocene, Qilian Mountains uplifted continuously and resulted in the shrink,extinction and being eroded of the basins, and aeolian red clay started to accumulate.展开更多
基金The National Natural Science Foundation of China(No.60702163)the National Science and Technology Major Project(No.2010ZX03007-002-01,2011ZX03004-003)
文摘A digital predistorted class-F power amplifier (PA) using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access ( WCDMA ) applications. Measurement results with the continuous wave (CW) signals indicate that the designed class-F PA achieves a peak power-added efficiency (PAE) of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio (ACPR) of the designed PA after digital predistortion (DPD) decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio (PAPR). The drain efficiency (DE) of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.
基金Project (No. 1027054) supported by the National Natural Science Foundation of China
文摘Proximal point algorithms (PPA) are attractive methods for solving monotone variational inequalities (MVI). Since solving the sub-problem exactly in each iteration is costly or sometimes impossible, various approximate versions ofPPA (APPA) are developed for practical applications. In this paper, we compare two APPA methods, both of which can be viewed as prediction-correction methods. The only difference is that they use different search directions in the correction-step. By extending the general forward-backward splitting methods, we obtain Algorithm Ⅰ; in the same way, Algorithm Ⅱ is proposed by spreading the general extra-gradient methods. Our analysis explains theoretically why Algorithm Ⅱ usually outperforms Algorithm Ⅰ. For computation practice, we consider a class of MVI with a special structure, and choose the extending Algorithm Ⅱ to implement, which is inspired by the idea of Gauss-Seidel iteration method making full use of information about the latest iteration. And in particular, self-adaptive techniques are adopted to adjust relevant parameters for faster convergence. Finally, some numerical experiments are reported on the separated MVI. Numerical results showed that the extending Algorithm II is feasible and easy to implement with relatively low computation load.
基金sponsored by the Science and Technology Program of Guangdong Province(20090308)
文摘Based on the teleseismic waveform data recorded by 82 permanent broadband stations in Guangdong Province and its adjacent areas including Fujian, Jiangxi, Hunan, Guangxi, Hainan and Taiwan, we calculate body wave receiver functions under all stations, and obtain the crustal thickness and average Poisson's ratio beneath all stations by the H-K stacking-search method of receiver function. The results show that the crustal thickness with an average thickness of 29. 5km in Guangdong Province and its adjacent areas ranges between 26. 8km and 33. 6kin and gradually thins from northwest to southeast. The crustal thickness in the Zhujiang Delta, western Guangdong, Nanning and Nan'ao areas is relatively thinner and ranges between 25. 0km and 28. 0km. The minimum crustal thickness is about 26km beneath Wengtian, Hainan and the Zhanjiang zone and Shangchuan Island in Guangdong. The crustal thickness in the zones of Mingxi, Fujian and Yongzhou, Hunan is thicker and varies between 31.0km and 34.0km. The distribution of Poisson's ratio in our study region ranges between 0.20 and 0. 29. Poisson's ratios in Southeast Hainan, the coastal areas of East Guangdong and West Fujian and the South Jiangxi have distinctly higher values than in others. It suggests that the various geothermal fields located in these areas have high heat flow values. The distribution of crustal thickness and Poisson's ratio has an obvious block feature and may be related to the distribution of faults and historical earthquakes.
基金Project(51435009) supported by the National Natural Science Foundation of ChinaProject(LQ14E080002) supported by the Zhejiang Provincial Natural Science Foundation of ChinaProject supported by the K.C.Wong Magna Fund in Ningbo University,China
文摘The car sequencing problem(CSP)concerns a production sequence of different types of cars in the mixed-model assembly line.A hybrid algorithm is proposed to find an assembly sequence of CSP with minimum violations.Firstly,the hybrid algorithm is based on the tabu search and large neighborhood search(TLNS),servicing as the framework.Moreover,two components are incorporated into the hybrid algorithm.One is the parallel constructive heuristic(PCH)that is used to construct a set of initial solutions and find some high quality solutions,and the other is the small neighborhood search(SNS)which is designed to improve the new constructed solutions.The computational results show that the proposed hybrid algorithm(PCH+TLNS+SNS)obtains100best known values out of109public instances,among these89instances get their best known values with100%success rate.By comparing with the well-known related algorithms,computational results demonstrate the effectiveness,efficiency and robustness of the proposed algorithm.
基金funded by the Seismic Situation Tracing Orientation Task,China Earthquake Administration(2014020120)the Science and Technology Support Program of Hebei Province(2014020120)
文摘We collected waveforms of a teleseismic event which occurred from January 2007 to October 2011 from 174 broadband seismic stations deployed in Hebei and its adjacent areas. Using the H-k stacking method,the average thickness and Poisson's ratio of the crust are acquired. In order to obtain reliable receiver functions, the broadband seismograms of 488 teleseismic earthquakes occurring in the epicentral distance range from 30° to 90° with magnitudes larger than Mb6. 0 are collected. The results show that crustal thickness have conspicuous lateral heterogeneity and have good correlation to the regional geological tectonic features. Poisson ratio's value is equated with the global models estimates which fluctuate at about 0. 25. Crustal thickness has positive correlation to the topography and the Taihang Mountains form the transition zone of thick and thin crustal thickness. There is an obvious difference in crustal thickness beneath the north and south of the Shanxi earthquake zone and the Poisson ratio of Datong,Ningwu and Anze basins is greater than 0. 3. The crustal thickness beneath the Zhang-Bo( Zhangjiakou-Bohai Sea)earthquake zone decreases from west to north and its Poisson ratio shows conspicuous lateral heterogeneity. The thin crust and low Poisson ratio in the Huabei( North China)basin may correlate with the delamination of the North China craton.
文摘This paper demonstrates the design and fabrication of a monolithic HBT power amplifier for TD-SCDMA cellu- lar phones that achieves high efficiency and linearity. The two-stage MMIC integrates the input matching circuits,interstage matching circuits, and active bias circuits in a single chip with size as small as 0.91mm × 0.98mm. The amplifier obtains a power-added efficiency of 43% (15%) and a gain of 28.5dB (24dB) at the high and low operation mode under the 3.4V supply. In addition, the adjacent channel leakage power is below - 45dBc/- 56dBc and - 39dBc/- 50dBc at 1.6MHz/3.2MHz offset in low and high power output modes, respectively, with QPSK modulation. The MMIC offers the potential for low cost production due to small chip size, stable voltage supply, and high performance at the same time.
基金supported by the China Geological Survey (Grant No. DD20160345-16)the National Natural Science Foundation of China (Grant Nos. 40382039, 41372020, 41372036, 41472035)
文摘The Cenozoic uplift of Qilian Mountains is critical to comprehend the uplift and extension of the Tibet Plateau as well as the formation of the first and second steps in China's topography. This study summarized dynamic stratigraphic realm comprehensively on the basis of stratigraphic correlation of different Cenozoic sedimentary basin regions of the Qilian Mountains and adjacent mountains. This facilitated the re-creation of the tectonic-sedimentary evolutionary process of the Qilian Mountains and their surrounding areas. The results indicate that during the Early Paleogene(Paleocene-Eocene), the Qilian Mountains were part of an uplift realm. During the Oligocene, Guide-Xining-Lanzhou-Linxia sag basin at the northern margin of the West Qinling Mountains came into being and was subjected to sedimentation. The Suli Basin located between the North and South Qilian paleo-uplifts began to form and undergo sedimentation. Intracontinental orogenic extrusion and basin detachment occurred at the Qilian Mountains during the Miocene, which caused successive uplifts of various mountains, including the Laji, South Qinghai,Jishi, Liupan, and South Shule Mountains. Until Pliocene, Qilian Mountains uplifted continuously and resulted in the shrink,extinction and being eroded of the basins, and aeolian red clay started to accumulate.