专业理论课《浮选化学》双语教学实践与思考

双语教学对于我国高等教育与世界接轨具有重要的意义,是培养适应社会发展高素质人才的需要。文章对专业理论课程《浮选化学》课程在双语教学实践中师资、教材和教学方法进行了探讨,并提出了双语教学在《浮选化学》教学中存在的问题与解决办法。

Electrochemical behavior of galena and jamesonite flotation in high alkaline pulp

In order to effectively separate galena and jamesonite and improve the recovery during the mixing flotation, the interaction mechanisms between the minerals and the collector of diethyl dithiocarbamate （DDTC） were investigated. Single mineral flotation test was organized to research the effect of pulp pH value on the flotation behavior of galena and jamesonite. Electrochemistry property of the interaction of these two minerals with DDTC was investigated by cyclic voltammetry and Tafel tests. Flotation test shows that the recovery of jamesonite in high alkaline pulp is strongly depressed by lime （Ca（OH）2）. The cyclic voltammetry and Tafel tests results show that the interaction between galena and DDTC is an electrochemical process. High pH value has little influence on the interaction between galena and DDTC, while it has great effect on jamesonite due to self-oxidation and specific adsorption of OH^- and CaOH^＋ on jamesonite surface. Non-electroactive hydroxyl compound and low-electroconductive calcium compounds cover the surface of jamesonite, which impedes electron transfer and DDTC adsorption, thus leads to very low floatability of jamesonite.

Electrochemical mechanism and flotation of chalcopyrite and galena in the presence of sodium silicate and sodium sulfite

The electrochemical mechanism involved in the selective separation of chalcopyrite from galena was investigated by flotation and electrochemical methods in the presence of sodium sulfite and sodium silicate,respectively,as a single depressant and their mixture as a combined depressant.Flotation tests revealed that the floatability of chalcopyrite was unaffected by depressants and its recovery remained constant(>80%)within the studied dosage range.Galena flotation was severely depressed with descending depressing order as follows:combined depressant﹥sodium silicate﹥sodium sulfite.Electrochemical analysis confirmed the high affinity of depressants on the galena surface,resulting in the formation of hydrophilic species,such as lead sulfite,lead sulfate,and lead orthosilicate.The oxidation of chalcopyrite surface and depressants did not exhibit any signals;conversely,the self-oxidation of chalcopyrite was depressed.The results of cyclic voltammograms well agreed with flotation results,demonstrating that chalcopyrite primarily reacted with the collector O-isopropyl-N-ethyl thionocarbamate and that galena mostly reacted with depressants.

Effect of quaternary ammonium salts on flotation behavior of aluminosilicate minerals

The electrokinetic properties and flotation of diaspore, kaolinite, pyrophyllite and illite with quaternary ammonium salts collectors were studied. The results of flotation tests show that the collecting ability of quaternary ammonium salts for the four minerals is in the order（from strong to weak） ofoctadecyl dimethyl benzyl ammonium chloride（ODBA）, cetyl trimethyl ammonium bromide（CTAB）, dodecyl trimethyl ammonium chloride（DTAC）. Under the condition of alkalescence, it is possible to separate the diaspore from the silicate minerals such as kaolinite, illite and pyrophyllite using quaternary ammonium salts as collector. Isoelectric points （IEP） of diaspore, kaolinite, pyrophyllite and illite are pH=6.0, 3.4, 2.3 and 3.2, respectively. Quaternary ammonium salts can change ζ-potential of the aluminosilicate minerals obviously. The flotation mechanisms were explained by ζ-potential and Fourier transform infrared spectrum （FT-IR） measurements. The results demonstrate that only electrostatic interaction takes place between aluminosilicate minerals （diaspore, kaolinite, pyrophyllite and illite） and quaternary ammonium salts.

Original potential flotation of galena and its industrial application

In the light of the knowledge gained by the study of electrochemical flotation for galena and selective flotation of galena from lead zinc iron sulfide ores, a technology for accurate potential control based on intrinsic electrochemical behavior in grinding flotation systems has been developed and is called "Original Potential Flotation (OPF)". The optimum conditions for the original potential flotation of galena from Pb Zn Fe sulfide ores are as follows: pH values of 12.5 12.8, potential of 150 180 mV and with diethyldithioncarbamate (DDTC) as collector. Lime is used as a regulator of pH, meanwhile, and can stabilize special potential very well, and this special potential is exactly the flotation potential of galena. This technology has been applied successfully in potential control flotation of galena in many complex lead zinc iron sulfide mines in China.

Research on Factors Affecting Flotation and Desulfurization of Coal by Electrochemical Method

Influence of factors such as potential of electrolyte, electrolyzing time, concentration of electrolyte, and pH value on flotation and desulfurization of coal was researched. The result shows that the electrochemical reduction can enhance the desulfurization effect and increase the yield of clean coal under certain conditions. So it is an effective method.

Surface Modification Mechanism of Fine Coal by Electrochemical Methods

In order to reveal the surface modification mechanism of fine coal by electrochemical methods, the structural changes of the coal surface before and after electrochemical modification were investigated by Fourier Transform In- frared Spectra (FTIR) and Raman Spectra. The results show that under certain electrochemical conditions, the oxy- gen-containing functional group in the coal structure and the oxygen content of absorption could be reduced and the floatability of coal improved. At the same time, the sulfur in the coal was reduced to the hydrophilic S2– which could be separated easily from coal. Thus electrochemical modification methods could be used to change the structure and func- tional group on the coal surface and to enhance the floatability of coal.

Electrochemical flotation of diethyldithiocarbamate-pyrrhotite system

Using sodium diethyldithiocarbamate as a collector the flotation behavior of pyrrhotite was investigated. The relationship between potential and pH range for pyrrhotite flotation was established. The results show that the flotation of pyrrhotite is dependent on pulp potential at certain pH values. Pyrrhotite has good floatability from pH 2 to pH 12, and poor flotability at pH>12. Cyclic voltammetry and Fourier transform infrared spectrum analysis show that the major adsorption product of DDTC on pyrrhotite is tetraethylthiuram disulfide. The intensity of Fourier transform infrared signals of tetraethylthiuram disulfide adsorbed on pyrrhotite and the anode current of a pyrrhotite electrode and flotation response of pyrrhotite are correlated with pulp potentials.

Comparisons between Flotation Deinking Abilities of Newsprint Paper by Using Enzyme and Chemicals

The aim of this research is to study the floatation deinking abilities of black mold enzyme and chemicals in newsprint paper application. In this experiment, the properties of deinked pulp from three different additives--chemicals, black mold enzyme, and chemicals together with black mold enzyme, are studied. The first part of the experiment was to find the optimal amount of chemicals and the optimal pH through the use of sodium hydroxide and surfactant. As a result, 0.2% of sodium hydroxide and 0.4% of surfactant on oven dried weight at pH 9 was found to be the optimal condition for the deinked pulp to yield the lowest ERIC （effective residual concentration） and the highest brightness. The second part of the experiment was to find the optimal amount of black mold enzyme used in the deinking process. As a result, the optimal condition for deinked pulp to retain the lowest ERIC and the highest brightness was 100 ppm of black mold enzyme and 10 minutes of enzyme reaction time. The third part of experiment was to study the de-inking ability of black mold enzyme and chemicals. Consequently, with 30 min of chemicals reaction time and 60 min of black mold reaction time, the deinked pulp retained low ERIC but higher brightness.

Effect of galvanic contact on the flotability of galena in the presence and absence of a collector

In this paper,the effect of various electrochemical environments in the galena flotation is investigated.The electrochemical environments consisted of a ball mill for grinding of galena ore and a Denver flotation cell for flotation of galena in the laboratory scale.In order to achieve the maximum recovery with sodium hyposulfite,the concentrations of 0.06 and 0.12 M of air and nitrogen gases have been used to control the pulp potential in the Denver flotation cell.The galena sample was from the ''Era mine'' which is located in the Kiyasar area,north of Iran.This mine contains:Galena(PbS) at least 22%,Fluorite(CaF 2) 73.37%,Quartz(SiO 2) 2.54% and other minerals such as Cerussite(PbCO 3) and Kaolinite(Al 2 Si 2 O 5(OH) 4).Flotation of Galena was conducted in a 0.12 M of sodium hyposulfite solution.It was found that the amount of recovery by this process was 85% and 63% in the presence and absence of potassium amyl xanthate(KAX) and at an estimated potential of 280 to 350 mV respectively while the recovery was 70% and 52% at an approximate potential of 175 to 210 mV in water in the presence and absence of collector(KAX).