By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six ty...By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an mnorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting tempera- tures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.展开更多
The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed....The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed. The dielectric constant of coal and mineral matter is studied in this paper and the amendment has been made to survey theory. The oscillogram is adopted to study the distribution of corona ion and electrostatic field.The paper details the study of remoing pyrite and ash from fine coal, and the test results demonstrate the high efficiency of removing pyrite and ash with electrostatic separator.展开更多
The aim of this study was to extract the biomass-based bottom and fly ash fractions by a three-stage fractionation method for water-soluble （H2O）, ammonium-acetate （CH3COONH4） and hydrochloric acid （HCl） fractio...The aim of this study was to extract the biomass-based bottom and fly ash fractions by a three-stage fractionation method for water-soluble （H2O）, ammonium-acetate （CH3COONH4） and hydrochloric acid （HCl） fractions in order to access the leaching behaviour of these residues. Except for Mo, S, Na and elements whose concentrations were lower than the detection limits, the extractable element concentrations in both ash fractions followed the order H2O＆lt;CH3COONH4＆lt;HCl. The elements concentrations in this study were also lower than those in our previous studies, in which certain extraction stages followed the BCR extraction procedure.展开更多
基金Projects 2003001 supported by the key project of Huainan city, & 2004kj125 by the Science Funding of Department of Education of Anhui Province
文摘By using the advanced instrumentation of a Computer Controlled Scanning Electron Microscope （CCSEM）, X-ray diffraction （XRD） and X-ray fluorescence （XRF）, the ash composition and the mineral components of six typical Huainan coals of different origins were studied. The transformation of mineral matter at high temperatures was tracked by XRD in reducing conditions. The quartz phase decreased sharply and the anorthite content tended to increase at first and then decreased with increasing temperatures. The formed mullite phase reached a maximum at 1250 ℃ but showed a tendency of slow decline when the temperature was over 1250 ℃. The mullite formed in the heating process was the main reason of the high ash melting temperature of Huainan coals. Differences in peak intensity of mullite and anorthite reflected differences in phase concentration of the quenched slag fractions, which contributed to the differences in ash melting temperatures. The differences in the location of an mnorphous hump maximum indicated differences of glass types which may affect ash melting temperatures. For Huainan coal samples with relatively high ash melting tempera- tures, the intensity of the diffraction lines for mullite under reducing condition is high while for the samples with relatively low ash melting temperature the intensity for anorthite is high.
文摘The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed. The dielectric constant of coal and mineral matter is studied in this paper and the amendment has been made to survey theory. The oscillogram is adopted to study the distribution of corona ion and electrostatic field.The paper details the study of remoing pyrite and ash from fine coal, and the test results demonstrate the high efficiency of removing pyrite and ash with electrostatic separator.
文摘The aim of this study was to extract the biomass-based bottom and fly ash fractions by a three-stage fractionation method for water-soluble （H2O）, ammonium-acetate （CH3COONH4） and hydrochloric acid （HCl） fractions in order to access the leaching behaviour of these residues. Except for Mo, S, Na and elements whose concentrations were lower than the detection limits, the extractable element concentrations in both ash fractions followed the order H2O＆lt;CH3COONH4＆lt;HCl. The elements concentrations in this study were also lower than those in our previous studies, in which certain extraction stages followed the BCR extraction procedure.
