It is very important to design the optimum starting time of water injection for the development of low permeability reservoirs. In this type of reservoir the starting time of water injection will be affected by a rese...It is very important to design the optimum starting time of water injection for the development of low permeability reservoirs. In this type of reservoir the starting time of water injection will be affected by a reservoir pressure-sensitive effect. In order to optimize the starting time of water injection in low permeability reservoirs, this effect of pressure change on rock permeability of low permeability reservoirs was, at first, studied by physical simulation. It was shown that the rock permeability decreases exponentially with an increase in formation pressure. Secondly, we conducted a reservoir engineering study, from which we obtained analytic relationships between formation pressure, oil production rate, water production rate and water injection rate. After our physical, theoretical and economical analyses, we proposed an approach which takes the pressure-sensitive effect into consideration and designed the optimum starting time of water injection, based on the principle of material balance. Finally, the corresponding software was developed and applied to one block of the Jiangsu Oilfield. It is shown that water injection, in advance of production, can decrease the adverse impact of the pressure-sensitive effect on low permeability reservoir development. A water-flooding project should be preferably initiated in advance of production for no more than one year and the optimum ratio of formation pressure to initial formation pressure should be maintained at a level between 1.05 and 1.2.展开更多
Using the tadpole improved Wilson quark action on small, coarse, and anisotropic lattices, meson-meson scattering lengths are calculated within quenched approximation. The study covers pion-pion scattering in the I = ...Using the tadpole improved Wilson quark action on small, coarse, and anisotropic lattices, meson-meson scattering lengths are calculated within quenched approximation. The study covers pion-pion scattering in the I = 2 channel and kaon-pion scattering in the I = 3/2 channel. The results are extrapolated towards the chiral limit. Finite volume and finite lattice spacing errors are also analyzed and results in the infinite volume and continuum limit are obtained. Our results are compared with the results obtained using Roy equations, chiral perturbation theory, dispersion relations, and the experimental data. We also compare our results with other lattice results on the scattering lengths.展开更多
In this paper, by using harmonic-oscillator wave functions of different interaction models, i.e. OPE (onepion-exchange model), OPsE (only pseudoscalar meson exchange model), the extended GBE (Goldstone-boson-exchange ...In this paper, by using harmonic-oscillator wave functions of different interaction models, i.e. OPE (onepion-exchange model), OPsE (only pseudoscalar meson exchange model), the extended GBE (Goldstone-boson-exchange model including vector and scalar mesons), and OGE (one-gluon-exchange model), we calculate and compare the strong decays of negative parity N* resonances under 2 GeV. We find that the conventional mixing angles are correct, and GBE and OGE are obviously superior to OPE and OPsE.展开更多
基金Projects 2003BA613-07-05 supported by the Program of National "Fifteen" Science and Technology 04E7029 by the CNPC Innovation Foundation
文摘It is very important to design the optimum starting time of water injection for the development of low permeability reservoirs. In this type of reservoir the starting time of water injection will be affected by a reservoir pressure-sensitive effect. In order to optimize the starting time of water injection in low permeability reservoirs, this effect of pressure change on rock permeability of low permeability reservoirs was, at first, studied by physical simulation. It was shown that the rock permeability decreases exponentially with an increase in formation pressure. Secondly, we conducted a reservoir engineering study, from which we obtained analytic relationships between formation pressure, oil production rate, water production rate and water injection rate. After our physical, theoretical and economical analyses, we proposed an approach which takes the pressure-sensitive effect into consideration and designed the optimum starting time of water injection, based on the principle of material balance. Finally, the corresponding software was developed and applied to one block of the Jiangsu Oilfield. It is shown that water injection, in advance of production, can decrease the adverse impact of the pressure-sensitive effect on low permeability reservoir development. A water-flooding project should be preferably initiated in advance of production for no more than one year and the optimum ratio of formation pressure to initial formation pressure should be maintained at a level between 1.05 and 1.2.
文摘Using the tadpole improved Wilson quark action on small, coarse, and anisotropic lattices, meson-meson scattering lengths are calculated within quenched approximation. The study covers pion-pion scattering in the I = 2 channel and kaon-pion scattering in the I = 3/2 channel. The results are extrapolated towards the chiral limit. Finite volume and finite lattice spacing errors are also analyzed and results in the infinite volume and continuum limit are obtained. Our results are compared with the results obtained using Roy equations, chiral perturbation theory, dispersion relations, and the experimental data. We also compare our results with other lattice results on the scattering lengths.
文摘In this paper, by using harmonic-oscillator wave functions of different interaction models, i.e. OPE (onepion-exchange model), OPsE (only pseudoscalar meson exchange model), the extended GBE (Goldstone-boson-exchange model including vector and scalar mesons), and OGE (one-gluon-exchange model), we calculate and compare the strong decays of negative parity N* resonances under 2 GeV. We find that the conventional mixing angles are correct, and GBE and OGE are obviously superior to OPE and OPsE.