论“重述神话”中的多元声音——以《格萨尔王》、《珀涅罗珀记》、《重量》为例

重构经典是当代的一大潮流,全球性的出版活动"重述神话"项目也因此而起。"重述神话"并非对神话传统进行纯粹的学术研究,也不是将远古神话简单改写或再现。作家融入个人风格,通过想象对神话进行重构,使得神话原有的意义与其后来者的解读过程表现出依存又矛盾的辩证关系。本文结合该项目所推出的部分作品,从它们对神话题材的选取、神话意义的解读及其叙述形式的运用等方面入手,探求其中的多元之音及其现实意义。

放下重负:《重量》异质化叙述中的存在主义思考

作为"神话重述"系列之一,珍妮特·温特森的小说《重量》不仅在内容上安排背负苍天的阿特拉斯最终放下宇宙,让为生活所困的当代叙述者不断出走,为这些人物设想了放下重负的种种可能,而且在叙述实践上放下"宏大叙事"和"影响的焦虑"等重负,通过复调型私人叙事、杂语和时空体对话等异质化叙述方式思考存在的个体特异性和荒诞性、责任的必然性和自由的相对性,赋予了古典神话以当代意义和新的生命力。

幼龄贵州小型猪体重与各脏器重量之间关系的回归分析

目的:测定幼龄贵州小型猪脏器重量、脏器系数的生物学特性指标,对体重与各脏器重量之间的关系进行了回归分析,并计算出相应的直线回归方程。方法:选用初生和一月龄贵州小型猪各20只,雌雄各半,分别测定体重和10个脏器重量,计算脏器系数,对脏体比与体重作相关性分析。结果:雌雄贵州小型猪初生组体重、肝重量、肾重量、胃系数差异均有极显著性(P<0.01),胃重量、心重量有显著性差异(P<0.05),而一月龄组雌雄体重和脏器重量差异均无显著性(P>0.05),肺系数差异有极显著性(P<0.01);雄性贵州小型猪体重与肝、胆囊、胃、心、肺、肾、脾、肾、脾、肾上腺、睾丸(P<0.01),两样本间有线性关系。雌性贵州小型猪体重与肝、胆囊、胃、心、肺、肾、脾、肾、脾、肾上腺(P<0.01),两样本间有线性关系。卵巢(P>0.05),两样本间无线性关系。结论:本研究填补了国内有关贵州小型猪脏器重量、脏器系数测定的空白,为相关研究打下基础。

Single leaf area estimation models based on leaf weight of eucalyptus in southern China

Leaf area is an important parameter for modeling tree growth and physiological processes of trees. The single young and mature leaf area estimation models of eucalyptus were developed based on leaf fresh weight. In total, leaf area and leaf weight were measured from 455 fresh leaves of 25 trees of eucalyptus in southern China. The majority of the data （80%） were used for model calibration, and the remaining data （20%） were used for model validation. The linear, compound and power models were tested. Based on goodness of fit, prediction ability and residual performance, we found that linear and power models could best describe the relationship between leaf area and weight for young leaf and mature leaf, respectively. The study provides a simple and reliable method for estimating single-leaf area, which has a good potential in the functional- structural model of eucalyptus.

Dry Matter Accumulation,Moisture Content in Maize Kernel and Their Influences on Mechanical Harvesting

[Objective] The aim of this study was to investigate the dry matter accumulation,moisture content in maize kernel and their influences on mechanical harvesting.[Methods] Using Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 as experimental materials,we preliminarily measured the dynamic changes of dry matter accumulation and moisture content with the days after pollination lasted,and investigated the effect of moisture content in kernels on mechanical harvesting of Zhengdan 958 and Liyu 16.[Results] During summer growing season,Zhengdan 958 and Liyu 16 became physiologically mature and suitable for harvesting at about 51 days after pollination,Xianyu 335 and Hongda 8 required 58 days to become physiologically mature and suitable for harvesting after pollination.At physiologically mature stage,the moisture contents in kernels of Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 were respectively 33.74%,28.86%,32.05% and 35.24%,respectively.Adopting mechanical harvesting at physiologically mature stage,the kernel loss rate of Zhengdan 958 and Liyu 16 was consistent with the range of mechanical operation index（kernel loss rate of 0.84%≤2%）,while the percentage of broken kernels did not accord with the range of mechanical operation index（kernel crashing rate of 10.12%≧1%）.The results indicate that Zhengdan 958 and Liyu 16 are not suitable for mechanical harvesting using full feeding combine havester.[Conclusion] This study provided theoretical basis for improving the maize harvest index under delayed harvesting.

Effect of Different Nitrogen Application Amount on the Net Increment of Fresh Dry Weight in Hybrid Rape

[ Objective] The aim of the research was to provide reference for reasonable application of nitrogen fertilizer for high yield.cultivation of hybrid rape cuhivar Youyan 9 and Youyan 10. [ Method] The net increment changes of individual plant fresh weight and dry matter weight of Youyan 9 and Youyan 10 with different nitrogen application treatments were studied. [ Result] The differences among average fresh weight increments of individual plant and average dry matter weight increment of individual plant with different treatments reached 0. 01 extremely significant level. Fresh weight increment and dry matter weight net increment of individual plant declined gradually with the increase of nitrogen application. In growtheourse ,fresh weight net increment of individual plant increased firstly then decreased and the maximum was in beginning flowering stage, besides that dry matter net increment increased gradually and the maximum was in mature period. The correlations among fresh net increment, dry matter weight net increment and yield net increment were positive or extremely positive. [ Conclusion] Under experimental condition, when nitrogen application was 225 kg/hm^2, hybrid rape Yanyou 9 and Yanyou 10 with low erucic,low glucosinolate could obtain high yield.

Study on CaCO_3 Decomposition of Various CalcinedShell Drugs by CO_(2-)Gravimetry￣

报道了用ＣＯ＿２重量法分析不同地区石决明、牡蛎、瓦楞子及蛤壳生、煅样品中ＣａＣＯ＿３的含量，发现在这４种贝壳类中药的部分地区煅制品中，存在ＣａＣＯ＿３已部分分解的现象。利用以该法测得的ＣａＣＯ＿３含量，可算出煅制品的ＣａＣＯ＿３分解率（Ｒ＿ｄ值）。实验结果证明Ｒ＿ｄ值与煅烧条件相关，这有助于进行贝壳类中药的煅制工艺分析。

Detection of Quantitative Trait Loci Associated with Several Internal Organ Traits and Teat Number Trait in a Pig Population

Quantitative trait loci （QTL） were detected for 8 internal organ traits, 3 carcass length traits, and teat number trait in 214 pigs in a resource population that included 180 F2 individuals. A total of 39 microsatellite markers were examined on SSC4, SSC6, SSC7, SSC8, and SSC13. The genetic traits included heart weight （HW）, lung weight （LW）, liver and gallbladder weight （LGW）, spleen weight （SPW）, stomach weight （STW）, small intestine weight （S1W）, large intestine weight （LIW）, kidney weight （KW）, carcass length to the first cervical vertebra （CL1）, carcass length to the first thoracic vertebra （CL2）, rib numbers （RNS）, and teat numbers （TNS）. Results indicated that, 3 highly significant QTL （P≤0.01 at chromosome-wise level） for HW （at 30 cM on SSC6）, RNS （at 115 cM on SSC7）, TNS （at 110 cM on SSC7）, and 6 significant QTL （P≤0.05 at chromosome-wise level） for LW （at 119 cM on SSC13）, LGW （at 94 cM on SSC6）, SPW （at 106 cM on SSC8）, SIW （0 cM on SSC4）, LIW （170 cM on SSC 4）, and TNS （at 95 cM on SSC6） were detected. The phenotypic variances for which these QTL were accounted ranged from 0.04 % to 14.06 %. Most of these QTL had not been previously reported.

Effects of Land Use Patterns on Soil Heavy Metal Contents

Through sampling in farmland and analysis in laboratory,the contents and the pollution level of Cr,Cu,As,Pb,Zn in different soils were studied. The comparative result showed that the As in all soil samples are lower than the mean value of Shaanxi and whole nation,the Cr in lower half soil samples are higher than the mean value of Shaanxi and whole nation,the Cu and Zn in majority soil samples are higher than the mean value of Shaanxi and whole nation,and the Pb in all soil samples is higher than the mean value of Shaanxi and whole nation. The single factor pollution index and multi-factor pollution index method were used to evaluate the soil pollution. According to Soil Environmental Quality Standard,the studied soils were at unpolluted degrees,the soils were clear,the quality of soil adapt to the crop growth,and not affect the quality of agricultural product.

Passive-source multitaper-spectral method based low-frequency data reconstruction for active seismic sources

Passive seismic data contain large amounts of low-frequency information. To effectively extract and compensate active seismic data that lack low frequencies, we propose a multitaper spectral reconstruction method based on multiple sinusoidal tapers and derive equations for multisource and multitrace conditions. Compared to conventional cross correlation and deconvolution reconstruction methods, the proposed method can more accurately reconstruct the relative amplitude of recordings. Multidomain iterative denoising improves the SNR of retrieved data. By analyzing the spectral characteristics of passive data before and after reconstruction, we found that the data are expressed more clearly after reconstruction and denoising. To compensate for the low-frequency information in active data using passive seismic data, we match the power spectrum, supplement it, and then smooth it in the frequency domain. Finally, we use numerical simulation to verify the proposed method and conduct prestack depth migration using data after low-frequency compensation. The proposed power-matching method adds the losing low frequency information in the active seismic data using the low-frequency information of passive- source seismic data. The imaging of compensated data gives a more detailed information of deep structures.

Investigation of Heavy Metal Contents in Traditional Chinese Herbal Medicine Peristrophe roxburghiana Collected from Northwest of Guangxi

Objective] This study was conducted to evaluate the product quality and safety of Peristrophe roxburghiana_ col ected from different places in Hechi City, northwest of Gunagxi, so as to provide basic data for further development and uti-lization of the characteristic plant resource P. roxburghiana. [Method] Contents of 9 kinds of heavy metals including Cd, Mn, Pb, Zn and Cu in the herb were deter-mined by the method of wet digestion-flame atomic absorption spectrophotometry and atomic fluorescence spectrometry, respectively. [Results] Heavy metal contents of Cd, Mn, Pb, Fe, Cu, Zn, As, Hg and Se were 1.62-17.25, 8.93-142.53, 4.37-18.43, 103.7-242.81, 2.55-5.35, 85.40-146.30, 0.07-0.54, 0.00-0.08 and 0.00-0.47 mg/kg, respectively. According to the national food safety standards and Green Trade Standards of lmporting ＆amp; Exporting Medicinal plants ＆amp; Preparations, the heavy metal contents of the P. roxburghiana_samples col ected from different coun-ties in Hechi City exceeded standards or at the critical values. Among which, Cd, Pb and Zn contents of the samples are seriously higher than the standards. [Con-clusion] Therefore, the impact of soil heavy metal pol ution on the safety of edible plants in the northwest of Guangxi should be highly concerned.

Analysis of Heavy Metal Content in Food Crops Planted Along the Shaanxi Inner Mongolia Expressway

To understand the effect of the running of Shaanxi Inner Mongolia Expressway on food crops planted along the sides, we determined the heavy metal contents(Zn, Pb, Cu and Cb) in the digestion solutions of the root, stem and leaf from rice and corn. The results showed that highway promoted the accumulation of heavy metal elements in corn and rice. Compared with the CKs(crops produced where no highway extend), contents of heavy metal elements in two crops tested from two sampling sites were both over standard. This indicates that food crops planted within 100 m away from the highway are been polluted by heavy metals, which is directly related with the running of Shaanxi Inner Mongolia Expressway. Based on this, the areas within 100 m away from the highway are not suggested to cultivate food crops.

MODEL RECONSTRUCTION FROM CLOUD DATA FOR RAPID PROTOTYPE MANUFACTURING

Model reconstruction from points scanned on existing physical objects is much important in a variety of situations such as reverse engineering for mechanical products, computer vision and recovery of biological shapes from two dimensional contours. With the development of measuring equipment, cloud points that contain more details of the object can be obtained conveniently. On the other hand, large quantity of sampled points brings difficulties to model reconstruction method. This paper first presents an algorithm to automatically reduce the number of cloud points under given tolerance. Triangle mesh surface from the simplified data set is reconstructed by the marching cubes algorithm. For various reasons, reconstructed mesh usually contains unwanted holes. An approach to create new triangles is proposed with optimized shape for covering the unexpected holes in triangle meshes. After hole filling, watertight triangle mesh can be directly output in STL format, which is widely used in rapid prototype manufacturing. Practical examples are included to demonstrate the method.

Full gravity gradient tensors from vertical gravity by cosine transform

We present a method to calculate the full gravity gradient tensors from pre-existing vertical gravity data using the cosine transform technique and discuss the calculated tensor accuracy when the gravity anomalies are contaminated by noise. Gravity gradient tensors computation on 2D infinite horizontal cylinder and 3D ＂Y＂ type dyke models show that the results computed with the DCT technique are more accurate than the FFT technique regardless if the gravity anomalies are contaminated by noise or not. The DCT precision has increased 2 to 3 times from the standard deviation. In application, the gravity gradient tensors of the Hulin basin calculated by DCT and FFT show that the two results are consistent with each other. However, the DCT results are smoother than results computed with FFT. This shows that the proposed method is less affected by noise and can better reflect the fault distribution.

Quality Analysis and Evaluation of Maize Cultivars Approved by Shanxi Province

[Objective] This study aimed to provide a theoretical basis for the genetic improvement of maize quality in Shanxi Province. [Method] The variations in unit weight, crude starch content, crude protein content, crude fat content and lysine content of maize cultivars approved by Shanxi Province during 2003-2012 were analyzed. [Result] In Shanxi Province, the average unit weight and crude starch content of maize cultivars approved during 2003-2012 were trended to be increased;the crude fat contents of maize cultivars approved during 2003-2012 showed no significant changes; the lysine contents of maize cultivars approved during 2003-2008 were essentially unchanged; the crude protein contents of maize cultivars approved during 2003-2012 declined slightly. [Conclusion] The crude starch content and unit weight of maize increased with the increased yield; the crude protein content, crude fat content and lysine content showed certain stability, and they were mainly controlled by genes. Therefore, the breeding of particular maize should be strengthened.

Edge enhancement of gravity anomalies and gravity gradient tensors using an improved small sub-domain filtering method

In order to enhance geological body boundary visual effects in images and improve interpretation accuracy using gravity and magnetic field data, we propose an improved small sub-domain filtering method to enhance gravity anomalies and gravity gradient tensors. We discuss the effect of Gaussian white noise on the improved small sub-domain filtering method, as well as analyze the effect of window size on geological body edge recognition at different extension directions. Model experiments show that the improved small sub-domain filtering method is less affected by noise, filter window size, and geological body edge direction so it can more accurately depict geological body edges than the conventional small sub-domain filtering method. It also shows that deeply buried body edges can be well delineated through increasing the filter window size. In application, the enhanced gravity anomalies and calculated gravity gradient tensors of the Hulin basin show that the improved small sub-domain filtering can recognize more horizontal fault locations than the conventional method.

Adsorption Performance of Activated Carbon Prepared from Corn Stalks

[Objective] This study aimed to study the adsorption performance of activated carbon prepared from corn stalks. [Methed] With granular activated carbon prepared from corn stalks as research object, adsorption performance simulation test equipment was set up to investigate the adsorption performance of the prepared activated carbon for methanol by static weight method. In addition, the effects of adsorption bed structure, activated carbon particle size in adsorption bed, addition amount of graphite powder in activated carbon and modified activated carbon on systematic adsorption performance were studied. [Result] Under conditions of same activated carbon and same adsorption temperature, the adsorption performance of new adsorption bed A （installed with finned diaphragm adsorbate tubes） was signifi- cantly better than that of unmodified adsorption bed B. Compared with adsorption bed B, adsorption bed A took 5 min shorter to reach the adsorption amount of 0.22 g/g. Under the same adsorption temperature, the adsorption performance of bed loaded with different-particle size activated carbon was significantly better than that loaded with same-particle size activated carbon. The bed loaded with different-particle size activated carbon took 16 min shorter to reach the adsorption capacity of 0.22 g/g compared with the bed loaded with same-particle size activated carbon. Adding proper amount of graphite powder in activated carbon could enhance the thermal conductivity and strengthen the adsorption properties. The optimum addition amount of graphite powder was 20% of the total amount of activated carbon. Com- pared with that of the control, the adsorption performance of activated carbon soaked by weak acidic solution was significantly improved. It took 3 min shorter to reach 87.1% of the equilibrium adsorption amount. [Conclusion] This study will provide reference for optimizing structural design of adsorption bed and adsorption refrigeration system.

Quantum Effects on Global Structure of Liquid Water

The structure difference between light and heavy liquid water has been systematically in- vestigated by high precision Raman spectroscopy over the temperature range of 5-85℃. Distinct difference between the Raman spectral profiles of two different liquid waters is clearly observed. By analyzing the temperature-dependent Raman spectral contour using global fitting procedure, it is found that the micro-structure of heavy water is more ordered than that of light water at the same temperature, and the structure difference between the light and heavy water decreases with the increase of the temperature. The temperature off- set, an indicator for the structure difference, is determined to vary from 28 ℃ to 18 ℃ for the low-to-high temperature. It indicates that quantum effect is significantly not only at low temperature, but also at room temperature. The interaction energy among water molecules has also been estimated from van＇t Hoff＇s relationship. The detailed structural information should help to develop reliable force fields for molecular modeling of liquid water.

Noise filtering of full-gravity gradient tensor data

In oil and mineral exploration, gravity gradient tensor data include higher- frequency signals than gravity data, which can be used to delineate small-scale anomalies. However, full-tensor gradiometry （FTG） data are contaminated by high-frequency random noise. The separation of noise from high-frequency signals is one of the most challenging tasks in processing of gravity gradient tensor data. We first derive the Cartesian equations of gravity gradient tensors under the constraint of the Laplace equation and the expression for the gravitational potential, and then we use the Cartesian equations to fit the measured gradient tensor data by using optimal linear inversion and remove the noise from the measured data. Based on model tests, we confirm that not only this method removes the high- frequency random noise but also enhances the weak anomaly signals masked by the noise. Compared with traditional low-pass filtering methods, this method avoids removing noise by sacrificing resolution. Finally, we apply our method to real gravity gradient tensor data acquired by Bell Geospace for the Vinton Dome at the Texas-Louisiana border.

Laws of strata energy release and corresponding safety warning system in metal mine

The strata deformation in mining area was monitored in Dabaoshan copper-iron mine,and an analytical method of strata energy release was put forward.On the basis of chaotic theory,by reconstructing the phase space for time series data of strata energy release,the saturated embedding dimension and the correlation dimension of the dynamic system were obtained to be 4 and 1.212 8,respectively,and the evolution laws of distances between phase points of strata energy release in the phase space were revealed.With grey theory,a prediction model of strata energy release was set up,the maximum error of which was less than 6.7%.The results show that there are chaotic characters in strata energy release during mining;after reconstructing phase space,the subtle changing characteristics of energy release can be magnified,and the internal rules can be fully demonstrated.According to the laws,a warning system for strata stability in mining area was established to provide a technical safeguard for safe mining.