A model of the continuous melt transesterification process of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor to produce polycarbonate is presented. The model is developed by using the molecula...A model of the continuous melt transesterification process of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor to produce polycarbonate is presented. The model is developed by using the molecular species model of polycarbonate melt polycondensation and the modeling method of reactive flash. Liquid phase is treated as perfect mixed flow and the vapor phase is assumed following the ideal gas law. With this model, the continuous melt transesterification process of bisphenol-A and diphenyl carbonate is examined with respect to different orocess parameters.展开更多
Environmentally friendly flotation reagent,polyaspartic acid(PAPA),was tested as a potential selective depressant in the flotation separation of chalcopyrite and Cu-activated sphalerite.The depression mechanism of PAP...Environmentally friendly flotation reagent,polyaspartic acid(PAPA),was tested as a potential selective depressant in the flotation separation of chalcopyrite and Cu-activated sphalerite.The depression mechanism of PAPA was revealed by contact angle measurements,Zeta potential measurements,Fourier transform infrared spectroscopy(FT-IR)analysis and inductively coupled plasma(ICP)measurement.The micro-flotation tests with single minerals showed that PAPA selectively depressed Cu-activated sphalerite,while chalcopyrite remained floatable.Moreover,a concentrate containing 31.40%Cu with a recovery of 92.43%was obtained in flotation tests of artificially mixed minerals.Results of contact angle measurements,Zeta potential measurements and FT-IR spectrum revealed that PAPA exerted a much stronger adsorption on Cu-activated sphalerite surface than on chalcopyrite surface,preventing the further adsorption of sodium diethyl dithiocarbamate(DDTC)on its surface.ICP measurements indicated that PAPA had an excellent complexing ability with Cu^(2+)in flotation pulp,weakening the activation of Cu species on sphalerite surface and producing selective depression.展开更多
In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method us...In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method using UHMWPE as the fiberforming polymer, 1, 2-dichloroethane as the main solvent. The important parameters of the flash-spinning were filtered by Plackett-Burman experimental design based on the single factor experiments. After determining the best regions of the fiber properties, the optimum level of the important parameters were determined by Box-Behnken design. The results of the design showed that the important parameters influencing on the properties of the flash.spinning fiber were spinning temperature, spinning pressure, and spinning solution concentration. The optimum technical parameters were： spinning temperature 186. 4 ~C, spinning pressure 6. 16 MPa, spinning solution concentration 3.06 %. The highest combination property of the flash-spinning fiber was 86.39 under this condition.展开更多
In many experiments, plastic scintillators are used as a counter instead of Geiger Muller counter, because they are so fast and they are used for pulsed neutron sources. So a silver activation counter has been constru...In many experiments, plastic scintillators are used as a counter instead of Geiger Muller counter, because they are so fast and they are used for pulsed neutron sources. So a silver activation counter has been constructed by plastic scintillator plates along with silver foils for determination the neutron yield of a 2.48 kJ plasma focus device, SBUPF1. This counter was calibrated by source removal method with an Am-Be 5 Ci neutron source which was placed above the anode of plasma focus device. Deuterium gas up to 8 mbar pressure was injected to this device, and the neutron yield produced by pulsed D-D fusion of plasma focus device was measured by the counter. The neutron yield of SBUPF1 in 8 mbar pressure was obtained （3.71± 0.32）×10^7 neutrons per shot. This result has relatively agreed with the neutron yield measured by silver activation Geiger counters.展开更多
基金Supported by the National Natural Science Foundation of China (No.10472034, No.10590351) the Key Technologies R&DProgram of "the 10th Five Year Plan" of China (No.2001BA303B-02).
文摘A model of the continuous melt transesterification process of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor to produce polycarbonate is presented. The model is developed by using the molecular species model of polycarbonate melt polycondensation and the modeling method of reactive flash. Liquid phase is treated as perfect mixed flow and the vapor phase is assumed following the ideal gas law. With this model, the continuous melt transesterification process of bisphenol-A and diphenyl carbonate is examined with respect to different orocess parameters.
基金financial supports from the National Natural Science Foundation of China(Nos.51974364,51904339)Hunan Province for Clean and Efficient Utilization of Strategic Calcium-containing Mineral,China(No.2018TP1002)。
文摘Environmentally friendly flotation reagent,polyaspartic acid(PAPA),was tested as a potential selective depressant in the flotation separation of chalcopyrite and Cu-activated sphalerite.The depression mechanism of PAPA was revealed by contact angle measurements,Zeta potential measurements,Fourier transform infrared spectroscopy(FT-IR)analysis and inductively coupled plasma(ICP)measurement.The micro-flotation tests with single minerals showed that PAPA selectively depressed Cu-activated sphalerite,while chalcopyrite remained floatable.Moreover,a concentrate containing 31.40%Cu with a recovery of 92.43%was obtained in flotation tests of artificially mixed minerals.Results of contact angle measurements,Zeta potential measurements and FT-IR spectrum revealed that PAPA exerted a much stronger adsorption on Cu-activated sphalerite surface than on chalcopyrite surface,preventing the further adsorption of sodium diethyl dithiocarbamate(DDTC)on its surface.ICP measurements indicated that PAPA had an excellent complexing ability with Cu^(2+)in flotation pulp,weakening the activation of Cu species on sphalerite surface and producing selective depression.
基金Key Project of Chinese Ministry of Education( No. 208005)Instructional Technology Project of National Textile andApparel Council, China ( No.2009076)Application Fundamental and Advanced Technology Research Proposal Project of Tianjin, China(No.10 JCYBJC03100)
文摘In this paper, statistical optimization method was used to optimize the flash-spinning process conditions. Ultra-high molecular weight polyethylene （UHMWPE） superfine fiber was fabricated by flash-spinning method using UHMWPE as the fiberforming polymer, 1, 2-dichloroethane as the main solvent. The important parameters of the flash-spinning were filtered by Plackett-Burman experimental design based on the single factor experiments. After determining the best regions of the fiber properties, the optimum level of the important parameters were determined by Box-Behnken design. The results of the design showed that the important parameters influencing on the properties of the flash.spinning fiber were spinning temperature, spinning pressure, and spinning solution concentration. The optimum technical parameters were： spinning temperature 186. 4 ~C, spinning pressure 6. 16 MPa, spinning solution concentration 3.06 %. The highest combination property of the flash-spinning fiber was 86.39 under this condition.
文摘In many experiments, plastic scintillators are used as a counter instead of Geiger Muller counter, because they are so fast and they are used for pulsed neutron sources. So a silver activation counter has been constructed by plastic scintillator plates along with silver foils for determination the neutron yield of a 2.48 kJ plasma focus device, SBUPF1. This counter was calibrated by source removal method with an Am-Be 5 Ci neutron source which was placed above the anode of plasma focus device. Deuterium gas up to 8 mbar pressure was injected to this device, and the neutron yield produced by pulsed D-D fusion of plasma focus device was measured by the counter. The neutron yield of SBUPF1 in 8 mbar pressure was obtained （3.71± 0.32）×10^7 neutrons per shot. This result has relatively agreed with the neutron yield measured by silver activation Geiger counters.
