In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When...In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When the target geology structure is significantly complicated, these parameters would fail to reflect the nature of the anomaly source, and wrong conclusions may be obtained. A wavelet approach and a metal factor method were used to comprehensively interpret the induced polarization anomaly of complex geologic bodies in the Adi Bladia mine. Db5 wavelet basis was used to conduct two-scale decomposition and reconstruction, which effectively suppress the noise interference of greenschist facies regional metamorphism and magma intrusion, making energy concentrated and boundary problem unobservable. On the basis of that, the ore-induced anomaly was effectively extracted by the metal factor method.展开更多
Objective To evaluated the efficiency of low-dose cytosine arabinoside plus aclarubicin with concurrent administration of granulocyte colony-stimulating factor （CAG） regimen for refractory biphenotypic acute leukem...Objective To evaluated the efficiency of low-dose cytosine arabinoside plus aclarubicin with concurrent administration of granulocyte colony-stimulating factor （CAG） regimen for refractory biphenotypic acute leukemia （BAL）. Methods We treated 5 refractory BAL patients by CAG regimen （10 mg.m 2 cytosine arabinoside subcutaneously administrated every 12 hours, day 1-14; 5-7 mg·m^-2 aclarubicin intravenously administrated daily, day 1-8; and concurrently used 200 μg·m^-2·d^-1 granulocyte colony-stimulating factor subcutaneously） from November 2002 to April 2007. The efficacy of the regimen was evaluated by response rate, and the side effects were also measured. Results The complete remission rate was 80%, median duration of absolute neutrophil count〈5.0×10^8/L and platelet count〈2.0×10^10/L was day 13 and day 1, respectively; and the infection rate was low （Ⅲ-Ⅳ infection rate, 20.00%）.展开更多
The hot deformation behavior of 20 Mn Ni Mo low carbon alloy was investigated by isothermal compression tests over wide ranges of temperature(1223-1523 K) and strain rate(0.01-10 s^(-1)). According to the experimental...The hot deformation behavior of 20 Mn Ni Mo low carbon alloy was investigated by isothermal compression tests over wide ranges of temperature(1223-1523 K) and strain rate(0.01-10 s^(-1)). According to the experimental true stress-true strain data, the constitutive relationships were comparatively studied based on the Arrhenius-type model, Johnson-Cook(JC) model and artificial neural network(ANN), respectively. Furthermore, the predictability of the developed models was evaluated by calculating the correlation coefficient(R) and mean absolute relative error(AARE). The results indicate that the flow stress behavior of 20 Mn NiM o low carbon alloy is significantly influenced by the strain rate and deformation temperature. Compared with the Arrhenius-type model and Johnson-Cook(JC) model, the ANN model is more efficient and has much higher accuracy in describing the flow stress behavior during hot compressing deformation for 20 Mn Ni Mo low carbon alloy.展开更多
The initiation sites and influencing factors of cavity nucleation were investigated for a Ti-6Al-2Zr-1Mo-1V alloy with lamellar starting structure,using the isothermal hot compression test.All samples were deformed to...The initiation sites and influencing factors of cavity nucleation were investigated for a Ti-6Al-2Zr-1Mo-1V alloy with lamellar starting structure,using the isothermal hot compression test.All samples were deformed to a true strain of 0.70 in the temperature range of 750-950°C and strain rate range of 0.001-10 s-1.The corresponding microstructures were observed by means of the metallurgical microscopy and scanning electron microscopy(SEM).It was found that all cavities occurred at the bulge regions of the compression specimens.Most of cavities nucleated along prior beta boundaries oriented 45°to the compression axis,while others nucleated at the interfaces of lamellar alpha colonies.Cavity nucleation was inhibited with increasing the volume fraction of beta phase and the volume fraction spheroidized of lamellar alpha phase.展开更多
We collect seismic moment tensors of the earthquakes occurring from 1900 to 2013 in and around the Chinese mainland and summarize the surface ruptures and displacements of 70 earthquakes with M S≥7. 0. We divide thes...We collect seismic moment tensors of the earthquakes occurring from 1900 to 2013 in and around the Chinese mainland and summarize the surface ruptures and displacements of 70 earthquakes with M S≥7. 0. We divide these large earthquakes into three types. Type A contains earthquakes with surface ruptures and displacements. Type B is earthquakes without displacements and Type C is those without any of this data. We simulate a triangular distribution of displacements for Type B and C. Then,we segment these large earthquakes by using their displacements and surface ruptures. Finally,kinematic models are determined from earthquake data and Bicubic Bessel spline functions. The results show that,first of all,the reasonability and spatial consistency of defined models are advanced.Strain rates have better continuity and are comparable with geologic and geodetic results in Himalaya thrust fault zones. The strain rates decrease in the Tarim basin and the Altun Tagh fault zones because of their low seismicity. The direction of compressional deformation in Gobi-Altay is changed from SE to NE and its extensional direction is changed from NE to NW. The extensional deformation in the Ordos block is diminished obviously. Secondly,earthquakes account for 30- 50% of expected motion of India relative to Eurasia determined from the NUVEL-1A model,with a missing component of 20 mm / a which may contain aseismic deformation such as fault creep and folds,the missing parts of earthquake data and elastic strain energy released by potential earthquakes.展开更多
In Argentina, at Central Andes Eastside, Cumbres Calchaquies, Aconquija Range and Ambato Block constitute a mountain chain that erects about 5,000 masl. Its geological story reveals morphotectonic and magmatic process...In Argentina, at Central Andes Eastside, Cumbres Calchaquies, Aconquija Range and Ambato Block constitute a mountain chain that erects about 5,000 masl. Its geological story reveals morphotectonic and magmatic processes are similar to the Pampean Ranges at which they belong to, giving origin to mineralized areas. Geochemical concentrations of trace metals （Cu, Pb, Zn, Mn, Mo, As） in stream sediments are related to the geology and mineral manifestations of the area. Geochemical high average concentration of Cu, Pb and Mo are observed in all ranges. It highlights the presence of As in Cumbres Calchaquies-Aconquija Range and Zn, Mn in the mountains of Aconquija Range-Ambato Block. It was determined that Cu-Zn-Mn complex is adsorbed or precipitated most frequently by Mn oxides. Complex Pb-Zn, Mn-As, Mo-As and Pb-Mo are absorbed by other agents （clay; oxides of Mn, Fe, AI; organic matter）.展开更多
基金Project(41174103)supported by the National Natural Science Foundation of ChinaProject(2010-211)supported by the Foreign Mineral Resources Venture Exploration Special Fund of China
文摘In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When the target geology structure is significantly complicated, these parameters would fail to reflect the nature of the anomaly source, and wrong conclusions may be obtained. A wavelet approach and a metal factor method were used to comprehensively interpret the induced polarization anomaly of complex geologic bodies in the Adi Bladia mine. Db5 wavelet basis was used to conduct two-scale decomposition and reconstruction, which effectively suppress the noise interference of greenschist facies regional metamorphism and magma intrusion, making energy concentrated and boundary problem unobservable. On the basis of that, the ore-induced anomaly was effectively extracted by the metal factor method.
基金Supported by the Development of Society Foundation of Suzhou (SS0813)the Natural Science Foundation of Jiangsu Province (2004BK424)+2 种基金the 135 Key Department Foundation of Jiangsu Province (135XY0416)the Outstanding Person Fund the Jiangsu Province (LJ200626)the Outstanding Person Fund of the First Affiliated Hospital of Soochow University (2004YQG05)
文摘Objective To evaluated the efficiency of low-dose cytosine arabinoside plus aclarubicin with concurrent administration of granulocyte colony-stimulating factor （CAG） regimen for refractory biphenotypic acute leukemia （BAL）. Methods We treated 5 refractory BAL patients by CAG regimen （10 mg.m 2 cytosine arabinoside subcutaneously administrated every 12 hours, day 1-14; 5-7 mg·m^-2 aclarubicin intravenously administrated daily, day 1-8; and concurrently used 200 μg·m^-2·d^-1 granulocyte colony-stimulating factor subcutaneously） from November 2002 to April 2007. The efficacy of the regimen was evaluated by response rate, and the side effects were also measured. Results The complete remission rate was 80%, median duration of absolute neutrophil count〈5.0×10^8/L and platelet count〈2.0×10^10/L was day 13 and day 1, respectively; and the infection rate was low （Ⅲ-Ⅳ infection rate, 20.00%）.
基金Project(CDJZR14130006)supported by the Fundamental Research Funds for the Central Universities,China
文摘The hot deformation behavior of 20 Mn Ni Mo low carbon alloy was investigated by isothermal compression tests over wide ranges of temperature(1223-1523 K) and strain rate(0.01-10 s^(-1)). According to the experimental true stress-true strain data, the constitutive relationships were comparatively studied based on the Arrhenius-type model, Johnson-Cook(JC) model and artificial neural network(ANN), respectively. Furthermore, the predictability of the developed models was evaluated by calculating the correlation coefficient(R) and mean absolute relative error(AARE). The results indicate that the flow stress behavior of 20 Mn NiM o low carbon alloy is significantly influenced by the strain rate and deformation temperature. Compared with the Arrhenius-type model and Johnson-Cook(JC) model, the ANN model is more efficient and has much higher accuracy in describing the flow stress behavior during hot compressing deformation for 20 Mn Ni Mo low carbon alloy.
基金Project(2009ZE56014)supported by the Aeronautical Science Foundation of ChinaProject(gf200901008)supported by the Open Fund of National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University,China
文摘The initiation sites and influencing factors of cavity nucleation were investigated for a Ti-6Al-2Zr-1Mo-1V alloy with lamellar starting structure,using the isothermal hot compression test.All samples were deformed to a true strain of 0.70 in the temperature range of 750-950°C and strain rate range of 0.001-10 s-1.The corresponding microstructures were observed by means of the metallurgical microscopy and scanning electron microscopy(SEM).It was found that all cavities occurred at the bulge regions of the compression specimens.Most of cavities nucleated along prior beta boundaries oriented 45°to the compression axis,while others nucleated at the interfaces of lamellar alpha colonies.Cavity nucleation was inhibited with increasing the volume fraction of beta phase and the volume fraction spheroidized of lamellar alpha phase.
基金sponsored by the Youth Fund of National Natural Science Foundation of China(41302171)National Natural Science Foundation of China(41372345)
文摘We collect seismic moment tensors of the earthquakes occurring from 1900 to 2013 in and around the Chinese mainland and summarize the surface ruptures and displacements of 70 earthquakes with M S≥7. 0. We divide these large earthquakes into three types. Type A contains earthquakes with surface ruptures and displacements. Type B is earthquakes without displacements and Type C is those without any of this data. We simulate a triangular distribution of displacements for Type B and C. Then,we segment these large earthquakes by using their displacements and surface ruptures. Finally,kinematic models are determined from earthquake data and Bicubic Bessel spline functions. The results show that,first of all,the reasonability and spatial consistency of defined models are advanced.Strain rates have better continuity and are comparable with geologic and geodetic results in Himalaya thrust fault zones. The strain rates decrease in the Tarim basin and the Altun Tagh fault zones because of their low seismicity. The direction of compressional deformation in Gobi-Altay is changed from SE to NE and its extensional direction is changed from NE to NW. The extensional deformation in the Ordos block is diminished obviously. Secondly,earthquakes account for 30- 50% of expected motion of India relative to Eurasia determined from the NUVEL-1A model,with a missing component of 20 mm / a which may contain aseismic deformation such as fault creep and folds,the missing parts of earthquake data and elastic strain energy released by potential earthquakes.
文摘In Argentina, at Central Andes Eastside, Cumbres Calchaquies, Aconquija Range and Ambato Block constitute a mountain chain that erects about 5,000 masl. Its geological story reveals morphotectonic and magmatic processes are similar to the Pampean Ranges at which they belong to, giving origin to mineralized areas. Geochemical concentrations of trace metals （Cu, Pb, Zn, Mn, Mo, As） in stream sediments are related to the geology and mineral manifestations of the area. Geochemical high average concentration of Cu, Pb and Mo are observed in all ranges. It highlights the presence of As in Cumbres Calchaquies-Aconquija Range and Zn, Mn in the mountains of Aconquija Range-Ambato Block. It was determined that Cu-Zn-Mn complex is adsorbed or precipitated most frequently by Mn oxides. Complex Pb-Zn, Mn-As, Mo-As and Pb-Mo are absorbed by other agents （clay; oxides of Mn, Fe, AI; organic matter）.
