Direct pre-stack depth migration on rugged topography

Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.

Study on the Test Method of Static Earth Pressure Coefficient of Deep Soils

The static earth pressure coefficient of soils is,approximately,considered to be a constant in the view of clas-sical soil mechanics. This is supported by many research results. The high pressure experimental research and analysis of remolding deep soil described herein indicate that the static earth pressure of thick overburden has a notable non lin-ear characteristic. It also appears larger than that of superficial soils. It is necessary for deep coal mine design and con-struction to consider this particularity of soil pressure so as to avoid engineering accidents and heavy loss of life and property.

Static corrections for low S/N ratio converted-wave seismic data

Converted waves have slow velocity and low signal-to-noise ratio. It is also difficult to pick first-breaks and bin the common-conversion-points （CCP）. Some statics methods, which work well for P-wave data, can＇t be effectively used for solving convertedwave statics problems. This has become the main obstacle to breakthroughs in convertedwave data processing. To improve converted-wave static corrections, first, a statics method based on the common-receiver-point （CRP） stack is used for the initial receiver static correction to enhance the coherency of the CRP stack. Second, a stack-power-maximization static correction which improves the continuity of the CCP stack is used for detailed receiver statics. Finally, a non-surface-consistent residual moveout correction of the CCP gathers is used to enhance the stack power of reflection signals from different depths. Converted-wave statics are solved by the joint use of the three correction methods.

Spot beam handover trigger and channel allocation scheme in GEO mobile satellite communication

An effective spot beam handover trigger and channel allocation scheme is proposed for GEO mobile satellite communication based on its characteristic and application. By using both signal strength and terminal location information, necessary handover is triggered promptly and accurately to reduce the negative effect of long signaling delay. Then handover decision is made with the handover queuing and channel allocation strategy. An adaptive channel resource allocation scheme is considered to optimize resource utilization with guarantee of emergency communication, which is significant for emergency rescue and disaster relief. Simulation results show that the proposed scheme prevents unnecessary handover effectively and has favorable adaptability to emergent requirement of satellite communication.

A hybrid approach for evaluating CPT-based seismic soil liquefaction potential using Bayesian belief networks

Discernment of seismic soil liquefaction is a complex and non-linear procedure that is affected by diversified factors of uncertainties and complexity.The Bayesian belief network(BBN)is an effective tool to present a suitable framework to handle insights into such uncertainties and cause–effect relationships.The intention of this study is to use a hybrid approach methodology for the development of BBN model based on cone penetration test(CPT)case history records to evaluate seismic soil liquefaction potential.In this hybrid approach,naive model is developed initially only by an interpretive structural modeling(ISM)technique using domain knowledge(DK).Subsequently,some useful information about the naive model are embedded as DK in the K2 algorithm to develop a BBN-K2 and DK model.The results of the BBN models are compared and validated with the available artificial neural network(ANN)and C4.5 decision tree(DT)models and found that the BBN model developed by hybrid approach showed compatible and promising results for liquefaction potential assessment.The BBN model developed by hybrid approach provides a viable tool for geotechnical engineers to assess sites conditions susceptible to seismic soil liquefaction.This study also presents sensitivity analysis of the BBN model based on hybrid approach and the most probable explanation of liquefied sites,owing to know the most likely scenario of the liquefaction phenomenon.

The study and analysis of floating datum selection for rugged terrain

We analyze the characteristics of different floating datums for static corrections and discuss the methods for determining them. The effect of different floating datum corrections was studied using theoretical model experiments, resulting in the conclusion that the velocity obtained after the floating datum correction with the minimum static correction errors depends on the velocity of the layer below the low velocity layer （LVL） lower boundary and is not related to topographic relief and LVL structure. For the real data processing case, wave equation numerical model experiments were conducted which resulted in a new method for calculating objective functions based on the waveform and modifications to the calculation equation for minimum static correction errors to make the method suitable for real data static correction processing using inhomogeneous velocity models with lower velocity boundary relief. Real data processing results demonstrate the method＇s superiority.

A Hybrid Algorithm Based on Differential Evolution and Group Search Optimization and Its Application on Ethylene Cracking Furnace

To find the optimal operational condition when the properties of feedstock changes in the cracking furnace online,a hybrid algorithm named differential evolution group search optimization(DEGSO) is proposed,which is based on the differential evolution(DE) and the group search optimization(GSO).The DEGSO combines the advantages of the two algorithms:the high computing speed of DE and the good performance of the GSO for preventing the best particle from converging to local optimum.A cooperative method is also proposed for switching between these two algorithms.If the fitness value of one algorithm keeps invariant in several generations and less than the preset threshold,it is considered to fall into the local optimization and the other algorithm is chosen.Experiments on benchmark functions show that the hybrid algorithm outperforms GSO in accuracy,global searching ability and efficiency.The optimization of ethylene and propylene yields is illustrated as a case by DEGSO.After optimization,the yield of ethylene and propylene is increased remarkably,which provides the proper operational condition of the ethylene cracking furnace.

Improving S/N ratio for pre-stack seismic data from western China

The seismic data from western China is very noisy. Two main reasons are static corrections and low S/N ratio problems. By seismic data processing and study these problems have been effectively solved by iterating the static corrections and improving the S/N ratio for pre-stack seismic data. Suppression and elimination of various other distortions has been implemented as well. Due to the fact that the S/N ratio is improved, the resolution of the seismic data is also improved.

Posterior lingual lidocaine: A novel method to improve tolerance in upper gastrointestinal endoscopy

AIM: To evaluate the effect of posterior lingual lidocaine swab on patient tolerance to esophagogastro-duodenoscopy, the ease of performance of the procedure, and to determine if such use will reduce the need for intravenous sedation. METHODS: Eighty patients undergoing diagnostic esophagogastroduodenoscopy in a tertiary care medical center were randomized to either lidocaine swab or spray. Intravenous meperidine and midazolam were given as needed during the procedure. RESULTS: Patients in the lidocaine swab group (SWG) tolerated the procedure better than those in the spray group (SPG) with a median tolerability score of 2 (1, 4) compared to 4 (2, 5) (P < 0.01). The endoscopists encountered less diffi culty performing the proceduresin the SWG with lower median difficulty scores of 1 (1, 5) compared to 4 (1, 5) in the SPG (P < 0.01). In addition, the need for intravenous sedation was also lower in the SWG compared to the SPG with fewer patients requiring intravenous sedation (13/40 patients vs 38/40 patients, respectively, P < 0.01). The patients in the SWG were more satisfi ed with the mode of local anesthesia they received as compared to the SPG. In addition, the endoscopists were happier with the use of lidocaine swab. CONCLUSION: The use of a posterior lingual lidocaine swab in esophagogastroduodenoscopy improves patient comfort and tolerance and endoscopist satisfaction and decreases the need for intravenous sedation.

System reliability analysis of seismic pseudo-static stability of rock wedge based on nonlinear Barton–Bandis criterion

Based on the nonlinear Barton–Bandis(B–B)failure criterion,this study considers the system reliability of rock wedge stability under the pseudo-static seismic load.The failure probability(Pf)of the system is calculated based on the Monte−Carlo method when considering parameter correlation and variability.Parameter analysis and sensitivity analysis are carried out to explore the influence of parameters on reliability.The relationships among the failure probability,safety factor(Fs),and variation coefficient are explored,and then stability probability curves of the rock wedge under the pseudo-static seismic load are drawn.The results show that the parameter correlation of the B–B failure criterion has a significant influence on the failure probability,but correlation increases system reliability or decreases system reliability affected by other parameters.Under the pseudo-static seismic action,sliding on both planes is the main failure mode of wedge system.In addition,the parameters with relatively high sensitivity are two angles related to the joint dip.When the coefficient of variation is consistent,the probability of system failure is a function of the safety factor.

Static and Dynamic Scaling Relationships for Moderate and Small Earthquakes in the Yunnan Region

Source spectra for moderate and small earthquakes are obtained after removing the path effect, site effect, and instrument response, etc. in the observed S-wave spectra. Based on the Brune source model and by means of genetic algorithm, the source parameters including seismic moment, stress drop, source dimension, etc. are determined, the radiated seismic energy for small-to-moderate earthquakes is measured with consideration of underestimation and compensation brought forth by limited bandwidth of the instrument, and the scaling relationships of static and dynamic parameters for earthquakes

Study of marine geomagnetic diurnal variation correction based on Wavelet Transform

Based on the existing geomagnetic diurnal variation theory and correction method,this paper makes a comprehensive analysis of the international geomagnetic quiet diurnal variation by Fourier Transform and one-dimensional Continuous Wavelet Transform.The frequency band greater than 0.2 Hz is the embodiment of the geomagnetic disturbance field in the frequency domain.Discrete Wavelet Transform is used to separate the variation,thus improving accuracy of the existing geomagnetic diurnal variation correction method.According to the characteristics of variation and Discrete Wavelet Decomposition,Sym8 wavelet is selected as the basic wavelet to decompose the data at 7 layers.The long-term and short-term variation of geomagnetic diurnal variation are effectively separated from the geomagnetic disturbance part under the condition of ensuring the fidelity.Compared with the results of Fourier Series decomposition and low-pass filter,the processing effect of Discrete Wavelet Transform is better.The effective separation and correction of short-term,long-term variation and geomagnetic disturbances can improve the quality of diurnal variation correction in marine geomagnetic measurement,reduce the error accumulation in the process of marine geomagnetic data processing,and improve the scientificity and accuracy of the current diurnal variation correction methods.

Experiments on excitation and data processing of low-frequency vibroseis in permafrost area of the tibetan plateau

Few seismic exploration work was carried out in Tibetan Plateau due to the characteristics of alpine hypoxia and harsh environmental protection needs.Complex near surface geological conditions,especially the signal shielding and static correction of permafrost make the quality of seismic data is not ideal,the signal to noise ratio(SNR)is low,and deep target horizon imaging is difficult.These data cannot provide high quality information for oil and gas geological survey and structural sedimentary research in the area.To solve the issue of seismic exploration in Tibetan Plateau,this test used low frequency vibroseis wide-line and high-density acquisition scheme.In view of the actual situation of the study area,the terrain,the source and the diff erent observation system were simulated,and the processing technique was adopted to improve the quality of seismic data.Low-frequency components with a minimum of 1.5Hz of vibroseis ensure the deep geological target imaging quality in the area,the seismic profi le wave group is clear,and the SNR is relatively high,which can meet the needs of oil and gas exploration.Seismic data can provide the support for the development of oil and gas survey in the Tibet plateau.

Uncertainty Analysis of Static Coulomb Stress Change Induced by Earthquake-A Case Study on the 2008 M_S8.0 Wenchuan Earthquake

Static Coulomb stress change induced by earthquake slip is frequently used to explain earthquake activities and aftershock distribution.However,some parameters for the Coulomb stress calculation are unable to be well constrained from laboratory experiments and field observations.Different parameters may directly affect the pattern of static Coulomb stress.The static Coulomb stress changes induced by the Wenchuan earthquake calculated by six research groups are not consistent with each other.To investigate how the parameters affect the calculation results,we change the parameters in turn through modeling and compare the results of different calculation parameters.We find that gravity,position and strike of receiver faults have little influence on coseismic Coulomb stress calculations,but other parameters can change the value and sign of the results in various degrees especially around the earthquake rupture plane.Therefore the uncertainty analysis of static Coulomb stress change induced by earthquake should be taken into consideration in the earthquake hazard analysis.

Vehicle Detection in Still Images by Using Boosted Local Feature Detector

Vehicle detectition in still images is a comparatively difficult task. This paper presents a method for this task by using boosted local pattern detector constructed from two local features including Haar-like and oriented gradient features. The whole process is composed of three stages. In the first stage, local appearance features of vehicles and non-vehicle objects are extracted. Haar-tike and oriented gradient features are extracted separately in this stage as local features. In the second stage, Adabeost algorithm is used to select the most discriminative features as weak detectors from the two local feature sets, and a strong local pattern detector is built by the weighted combination of these selected weak detectors. Finally, vehicle detection can be performed in still images by using the boosted strong local feature detector. Experiment results show that the local pattern detector constructed in this way combines the advantages of Haar-like and oriented gradient features, and can achieve better detection results than the detector by using single Haar-like features.

Possible Thermal Brightness Temperature Anomalies Associated with the Yutian (China) M_S7.3 Earthquake on February 12,2014

In order to analyze the seismic brightness temperature anomalies associated with the Yutian earthquake which occurred at Yutian County, Xinjiang on February 12,2014, daily brightness temperature data was collected from the China Geostationary Meteorological Satellite FY-2E,for the period from May 1,2012 to April 30,2014 and the geographical extent of 30°- 45°N latitude and 70°- 95°E longitude. The continuous wavelet transform method was used to analyze the relative wavelet power spectrum( RWPS) of brightness temperature data for each pixel. And the RWPS time-spatial evolution within the analysis area was obtained. The results showed that the anomaly started to appear at the vicinity of epicentre since October 2013, and anomalous areas gradually enlarged and stretched towards to Altun fault zone and the eastern part of West Kunlun fault zone. Anomalies began to appear at fault zones at Middle Tianshan Mountains, Southern Tianshan Mountains and the western part of the West Kunlun Mountains area which is located at the western margin of Tarim basin,since November 2013. Then anomalous area further enlarged and gathered along fault zones,and eventually,anomalous belts were developed along fault zones around the Tarim basin. The anomaly area and amplitude reached their maximum in late December 2013 and early January 2014. With the impending earthquake,the anomaly area and amplitude dwindled. Anomalies at the vicinity of epicentre disappeared days before the occurrence of the main shock. However, the anomaly at Altun and Middle Tianshan areas still remained. After the main shock,the anomaly attenuated quickly and the whole anomaly disappeared in late February 2014.

The Effect of Static Stress Triggering of the M_S 7. 1 Yushu Earthquake

This paper calculates the static stress changes generated by the Yushu M_S 7. 1 earthquake in Qinghai Province. On the basis of regional stress,we take account of the static stress change triggered by the Yushu M_S 7. 1 earthquake to find the optimally oriented fault planes,then calculate the Coulomb stress change on the optimally oriented fault plane. The results indicate that most of the aftershocks are triggered by the mainshock. The image of Coulomb stress changes is also in accord with regional earthquakes ( M_L ≥3. 0 ) distribution,but the value is lower than 0. 01MPa. In addition,this paper calculates the Coulomb stress changes in the case that the aftershock fault plane is the same as the main shock. Through comparison,we find that the image of Coulomb stress changes obtained using the "optimally oriented fault"approach is more consistent with the distribution of Yushu aftershocks and regional earthquakes.

Instantaneous Real-Time Detection Technology of GLI on FY-4 Geostationary Meteorological Satellite

Lightning is a typical example of an instantaneous random point source target. It has close connection with severe convective phenomena such as a thunderstorm, whose distribution, variation, position and forecasting can be acquired through lightning observation. In this paper, we discuss the way to achieve instantaneous lightning signal intensification and detection from geostationary orbit by using the differences between the lightning signal and the slowly changing background noise such as that of cloud, land and ocean, combining three methods, spectral filtering, spatial filtering and background noise, enabling removal between frames. After six months of operation in orbit, lightning within the coverage of the Geostationary Lightning Imager was effectively detected, strongly supporting the case for shorttime and real-time early warning, forecasting and tracking of severe convective phenomena in China.

Earth pressure coefficient at rest during secondary compression

In order to obtain the earth pressure coefficient at rest (K0) at higher consolidation pressures during secondary compression, a series of K0 tests for saturated reconstituted clay were conducted. The results indicate that the measured K0 in secondary compression can be described by equations related to internal friction angle, secondary compression coefficient, compression index, recompression index, and sediment time. Effects of consolidation pressures and sediment time on K0 during secondary compression can be attributed to cementation (part of cohesion) increase and internal friction angle decrease. Cementation increase leads to nonlinear variation for K0 and internal friction angle decrease results in increase of K0. K0 computed by equations associated with internal friction angle is overestimated at apparent lower consolidation pressures with different sediment time, which agrees with the measured values well at apparent higher consolidation pressures.

Static Analysis of Buried Pipes Using Coupling between Layerwise Finite Element and Boundary Element Method

This work deals with the analysis of soil-structure interaction modeling of pipeline problems in static behavior using the coupling between FEM （finite element method） and BEM （boundary element method）. The representation of the pipe is made by MEF using one fmite element in the cylindrical panel formulated from the theory of equivalent discrete layers （Layerwise theory）, proposed by J. N. Reddy. The soil is represented by elastic continum infimite or semi-infinite and modeled using boundary elements with special curved surface, associated with cylindrical panel used to represent the soil-structure interaction within the soil, especially at the contact surface with the pipe.