期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
一次溶样分离地质样品中Pb-Sr-Nd方法的可行性研究 被引量:17
1
作者 宗春蕾 袁洪林 戴梦宁 《岩矿测试》 CAS CSCD 北大核心 2012年第6期945-949,共5页
现有的地质样品中Pb、Sr、Nd分离分析方法是对Pb和Sr-Nd分别采用两份样品进行分离,多消耗一份样品量,因而制约了样品量少的研究。本文提出了基于HNO3-HF-HClO4混合酸熔融样品,采用AG1-X8、AG50W-X8和HDEHP组合离子交换柱,对同一份地质... 现有的地质样品中Pb、Sr、Nd分离分析方法是对Pb和Sr-Nd分别采用两份样品进行分离,多消耗一份样品量,因而制约了样品量少的研究。本文提出了基于HNO3-HF-HClO4混合酸熔融样品,采用AG1-X8、AG50W-X8和HDEHP组合离子交换柱,对同一份地质样品一次溶样,连续分离Pb、Sr、Nd。用该方法对国际标准样品AGV-2、BHVO-2中的Pb、Sr、Nd进行分离,回收率均优于95%,全流程空白分别为Pb<0.2 ng,Sr<1.5 ng,Nd<1.1 ng。用多接收器-电感耦合等离子体质谱(MC-ICP-MS)进行同位素比值测定,结果表明本研究提出的一份样品连续分离后的同位素测定结果与传统方法利用两份样品分别进行分离的结果在误差范围内完全一致。本文的研究可实现微量岩石样品的Pb、Sr、Nd同位素准确分析,对于珍贵样品的同位素组成研究具有重要意义。 展开更多
关键词 PB SR ND 同位素组成 连续分离 一次溶样
下载PDF
萤石一次溶样连续分离Rb、Sr、Sm、Nd及Sr-Nd同位素比值TIMS精确测定 被引量:1
2
作者 张利国 杨梅 +1 位作者 杨红梅 张春红 《华南地质》 CAS 2022年第4期701-707,共7页
地质样品中Rb-Sr和Sm-Nd同位素传统分析方法是采用两份样品分别进行Rb-Sr和Sm-Nd分离。本文针对王水溶解后的萤石,采用Dowex50×8阳离子交换树脂和P507离子交换柱的组合,对同一份萤石样品直接溶样,连续分离Rb、Sr、Sm、Nd,并采用该... 地质样品中Rb-Sr和Sm-Nd同位素传统分析方法是采用两份样品分别进行Rb-Sr和Sm-Nd分离。本文针对王水溶解后的萤石,采用Dowex50×8阳离子交换树脂和P507离子交换柱的组合,对同一份萤石样品直接溶样,连续分离Rb、Sr、Sm、Nd,并采用该方法对国际标准样品BCR-2中的Rb、Sr、Sm、Nd元素进行分离,然后用表面热电离质谱法(TIMS)进行同位素组成测定。结果表明经该方法连续分离后的样品元素含量及同位素比值测定结果与标样的参考值在误差范围内一致。该方法不仅可以减少样品用量、缩短测试周期、节约成本,而且有效避免了样品的不均一性,对于矿物样品的同位素组成研究具有重要意义。 展开更多
关键词 萤石 Rb、Sr、Sm、Nd同位素 一次溶样 连续分离 Sr-Nd比值TIMS测定
下载PDF
碱溶法一次溶样测定出口铝锭中硅和铁
3
作者 粱炜 袁萍 《化学研究》 CAS 2000年第4期52-53,共2页
研究了采用碱溶法一次溶样测定出口铝锭中硅和铁的方法 ,与国标方法比较 ,减少了溶样次数和试剂消耗 ,提高了工作效率。经对样品的实际测定 ,回收率为 98.3%~ 10 5 .4% ,测量的相对标准偏差小于 2 .5 %。
关键词 碱溶法一次溶样 铝锭
下载PDF
滴定法快速测定多金属矿石中的铜铅锌铁 被引量:9
4
作者 冯忠伟 《化工技术与开发》 CAS 2011年第8期48-49,69,共3页
采用盐酸、硝酸、硫酸等试剂分解试样,铅形成硫酸铅沉淀,过滤洗涤使硫酸铅沉淀与铜、锌、铁等金属离子分离,沉淀加NaAc-HAc缓冲液溶解,用EDTA标准液滴定测铅。滤液以水定容至100mL,用移液管分别分取2份部分溶液,1份溶液用碘量法测定铜。... 采用盐酸、硝酸、硫酸等试剂分解试样,铅形成硫酸铅沉淀,过滤洗涤使硫酸铅沉淀与铜、锌、铁等金属离子分离,沉淀加NaAc-HAc缓冲液溶解,用EDTA标准液滴定测铅。滤液以水定容至100mL,用移液管分别分取2份部分溶液,1份溶液用碘量法测定铜。另1份溶液加过量氨水使锌离子与铁离子等分离,过滤洗涤,滤液用EDTA标准液滴定测锌;氢氧化铁沉淀加HCl溶液溶解,用重铬酸钾法测定铁。试验测定结果与传统单独测定方法的测定结果相吻合。 展开更多
关键词 多金属矿 一次溶样 滴定法 铜铅锌铁测定
下载PDF
Application of FTIR to analysis chemical structure of soot aerosol emitted from lump-coal combustion in fixed bed
5
作者 WANG Qing-cheng LUO Yong-hao 《Journal of Environmental Science and Engineering》 2008年第5期38-47,共10页
The objectives of this work are to study the primary chemical structure of soot aerosol derived from lump-coal combustion in different experimental conditions in fixed bed. A laboratory-scale movable fixed bed, water-... The objectives of this work are to study the primary chemical structure of soot aerosol derived from lump-coal combustion in different experimental conditions in fixed bed. A laboratory-scale movable fixed bed, water-cooled soot aerosol collection system, and electric reactor have been designed and used in the process. Three kinds of coals, sized at 3-5 ram, have been heated in the experiments. Fourier Transform Infrared Spectroscopy (FTlR) has been employed to test functional groups of soot aerosol samples. Infrared spectra from 400 to 4000 cm^ -1 and semiquantitative analysis have been employed. The results of experiments show that contents of hydrogen-bonded are increased, contents of unsaturated hydrocarbons are increased, and contents of aromatic hydrocarbons are decreased with temperature increase; contents of hydrogen-bonded and unsaturated hydrocarbons are increased first and decreased late, and contents of aromatic hydrocarbons are decreased with gases residence time extension; the contents of hydrogen bonded and unsaturated hydrocarbons derived from soot aerosol samples are higher than those from original coal samples in lower-volatile coals, and the contents of aromatic hydrocarbons derived from soot aerosol samples are lower than those from original coals; and contents of hydrogen-bonded are decreased, contents of unsaturated hydrocarbons are increased, and contents of aromatic hydrocarbons are decreased with a increase. 展开更多
关键词 lump-coal COMBUSTION soot aerosol fixed bed FTIR
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部