Alkylpolyglycoside inducing poly (butylene terephthalate) non-woven graft copolymerization of chitosan

In order to improve the wettability and biocompatibility of the poly （butylene terephthalate） non-woven （PBTNW）, the method of surface modification is used to graft copolymerization of chitosan （CS） onto the PBTNW under alkylpolyglycoside （APG） inducing. The product is thoroughly characterized with the Fourier transform infrared spectroscopy （FrIR）, the electron spectroscopy for chemical analysis （ESCA）, the thermogravimetric （TG） and the scanning electron microscopy （SEM）. It is found that chitosan is successfully grafted onto PBTNW. In addition, the water contact angles, hemolysis tests and cytotoxicity evaluation tests show an improvement in wettability and biocompatihility as a result of graft copolymerization of chitosan. So the CS-grafted PBTNW exhibits greater superiority than the original PBTNW. The CS-grafted PBTNW can be a candidate for blood filter materials and other medical applications.

Liquid-Liquid Equilibria of the Water-Ethanol-Dimethyl Succinate Ternary System

Liquid-liquid equilibrium (LLE) data for the ternary systemwater-ethanol-dimethyl succinate have been determined experimentallyat temperatures ranging from 298.15 to 318.15 K at 5 K intervals.Complete phase diagrams were obtained by determining solubility andthe tie-line data. Tie-line compositions were correlated byOthmer-Tobias method. The universal quasichemical functional groupactivity coefficient (UNIFAC) and modified UNIFAC methods were usedto predict the phase equilibrium in the system using the interactionparameters deter- Mined from experimental data between groups CH_3,CH_2, OH, CH_3 COO and H_2O.

Preparation and Properties of a New Type of Poly(butylene-terephthalate)with Layered Silicate Nanocomposites

In this paper, poly(butylene-terephthalate)-layered silicate of clay nanocomposites (NPBT) are reported. Their thermal properties, heat distortion temperature (HDT) and crystallization nucleation are investigated. NPBT samples have apparent viscosity over 0.85, HDT of 30℃ to 50℃ higher than that of poly (butylene-terephthalate) (PBT) for clay load from 1.0% to 10.0% (by mass), and higher capability to accommodate clay than other polymers. The nonisothermal crystallization experiments indicate that the better thermal degradation behavior and crystallization rate of NPBT are 50% higher than PBT, and its injection mould processing temperature is lowered from 110℃ to 55℃. NPBT samples are characterized by several techniques. X-ray shows an original clay interlayer distance enlarged from 1.0 nm to 2.5 nm, while both TBM and AFM indicate an average size from 30nm to lOOnm of exfoliated clay layers, and 3%(by mass) of particle agglomeration being phase separated from PBT matrix, which are factors on some mechanical properties decrease of NPBT. The disappearance of spherulitic morphology in NPBT resulted from layers nucleation is detected. Improving NPBT properties by treating clay with long chain organic reagent and controlling the way to load it is suggested.

Kinetics of the Mono-esterification Between Terephthalic Acid and 1,4-Butanediol

The chemical kinetics of the monoesterification between terephthalic acid(TPA)and 1,4-butanediol (BDO)catalyzed by a metallo-organic compound was studied using the initial rate method.The experiments were carried out in the temperature range of 463-483 K,and butylhydroxyoxo-stannane(BuSnOOH)and tetrabutyl titanate[Ti(OBu)4]were used as catalyst respectively.The initial rates of the reaction catalyzed by BuSnOOH or Ti(OBu)4 were measured at a series of initial concentrations of BDO(or TPA)with the concentration of TPA(or BDO)kept constant.The reaction orders of reagents were determined by the initial rate method.The results indicate that the reaction order for TPA is related with the species of catalyst and it is 2 and 0.7 for BuSnOOH and Ti(OBu)4 respectively.However,the order for BDO is the same 0.9 for the two catalysts.Furthermore,the effects of temperature and catalyst concentration are investigated,and the activation energies and the reaction rate constants for the two catalysts were determined.

Nonisothermal Crystallization Kinetics of Poly(butylene adipate-co-terephthalate) Copolyester

Nonisothermal crystallization behavior of poly(butylene adipate-co-terephthalate)(PBAT) synthesized via direct esterification and polycondensation reactions was investigated by the differential scanning calorimetry(DSC).The Avrami equation modified by Jeziorny and the Z.S.Mo equation were employed to describe the non-isothermal crystallization kinetics of copolyester samples.The test results showed that the Avrami equation was successful in describing nonisothermal crystallization process of PBAT copolyesters.PBAT copolyester could give birth to secondary crystallization.The crystallization parameter(Zc) increased with an increasing cooling rate and the Avrami exponent(n) was around 2.3.For a given cooling rate,the value of Zc demonstrated a sagging trend with an increase in adipic acid(AA) content.The equation proposed by Z.S.Mo was successful in describing the nonisothermal crystallization kinetics of PBAT copolyesters.

Study on Structure and Crystallinity of A New Biodegradable Aliphatic-Aromatic Copolyester

A series of biodegradable aliphatic-aromatic copolyesters, poly(butylene terephthalate-co-butylene adipate-co- ethylene terephthalate-co-ethylene adipate) (PBATE), were synthesized from terephthalic acid (PTA), adipic acid (AA), 1,4-butanediol (BG) and ethylene glycol (EG) through direct esterification and polycondensation. The sequence structure and crystallinity of the copolyester were investigated by 1H NMR spectroscopy and the wide-angle X-ray diffractometry (WAXD). The analytical results showed that the PBATE copolyester was a random copolymer and the composition of PBATE copolyester was almost consistent with the feed molar ratios. The crystal structure of PBATE copolyester belonged to the triclinic crystalline system; The variation in melting point of the synthesized PBATE copolyester agreed well with the estimation obtained by the Flory equation and was applicable to the random copolymer.

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Carbon nanotube (CNT)-filled polycarbonate (PC)/poly(butylene terephthalate) (PBT) and polycarbonate (PC)/poly(ethylene terephthalate) (PET) blends containing 1 wt% CNTs over a wide range of blend compositions were prepared by melt mixing in a torque rheometer to investigate the structure-electrical conductivity relationship. Field emission scanning electron microscopy was used to observe the blend morphology and the distribution of CNTs. The latter was compared with the thermodynamic predictions through the calculation of wetting coefficients. It was found that CNTs are selectively localized in the polyester phase and conductive blends can be obtained over the whole composition range (20 wt%, 50 wt% and 80 wt% PBT) for CNT-filled PC/PBT blends, while conductive CNT-filled PC/PET blends can only be obtained when PET is the continuous phase (50 wt%, 80 wt% PET). The dramatic difference in the electrical conductivity between the two types of CNT-filled PC/polyester blends at a low polyester content (20 wt%) was explained by the size difference of the dispersed phases on the basis of the transmission electron microscope micrographs.