2,3-disulfanylbutanedioic acid（DMSA） was found to be a selective depressant in the flotation separation of coppermolybdenum sulfides.The flotation results suggest that a low dosage of DMSA has a strong depression ef...2,3-disulfanylbutanedioic acid（DMSA） was found to be a selective depressant in the flotation separation of coppermolybdenum sulfides.The flotation results suggest that a low dosage of DMSA has a strong depression effect on chalcopyrite in the p H range between 4 and 12.At p H 6,the recoveries of molybdenum are up to 85%,75%,and 80% while those of chalcopyrite are 15%,5%,and 20% respectively when flotation tests are carried out with single minerals,mixed minerals and molybdenum-bearing copper concentrates.Adsorption isotherms measurement indicates that DMSA adsorbs more strongly on chalcopyrite than on molybdenite.The frontier orbital calculation reveals that the two S atoms of DMSA molecule are active centers for the adsorption of the DMSA molecule on chalcopyrite surface.Fermi level calculation shows that chalcopyrite can obtain electrons from the DMSA molecule while molybdenite cannot.展开更多
To design an effective and realistically applicable sinter bonding process for power devices,we proposed a two-step process using a 200 nm Cu-particle-based paste to form a bondline having high-temperature sustainabil...To design an effective and realistically applicable sinter bonding process for power devices,we proposed a two-step process using a 200 nm Cu-particle-based paste to form a bondline having high-temperature sustainability and superior thermal conductance.This process involved rapid pressure-assisted sinter bonding in air followed by pressureless annealing in a nitrogen atmosphere.In the case of a paste prepared with a mixture of 20 wt.%malic acid and 80 wt.%ethylene glycol,sinter bonding at 300℃and 5 MPa for only 30 s resulted in a sufficient shear strength of 23.1 MPa.The shear strength was significantly enhanced to 69.6 MPa by the additional pressureless aging for 30 min.Therefore,the two-step sinter bonding process is expected to provide an outstanding production rate as a next-generation sinter bonding process.展开更多
A simple and direct route for double C–C bond formation by copper-catalyzed Meerwein carboarylation process has been developed. In the presence of Cu I(5 mol%), tert-butyl nitrite and anilines, a wide variety of N-ar...A simple and direct route for double C–C bond formation by copper-catalyzed Meerwein carboarylation process has been developed. In the presence of Cu I(5 mol%), tert-butyl nitrite and anilines, a wide variety of N-arylacrylamides underwent tandem Meerwein arylation/C–H cyclization to produce pharmaceutically important 3-benzyl-3-alkyloxindole in moderate to good yield.展开更多
基金Project(2012BAB01B03)supported by the National Key Technology Support Program of China
文摘2,3-disulfanylbutanedioic acid（DMSA） was found to be a selective depressant in the flotation separation of coppermolybdenum sulfides.The flotation results suggest that a low dosage of DMSA has a strong depression effect on chalcopyrite in the p H range between 4 and 12.At p H 6,the recoveries of molybdenum are up to 85%,75%,and 80% while those of chalcopyrite are 15%,5%,and 20% respectively when flotation tests are carried out with single minerals,mixed minerals and molybdenum-bearing copper concentrates.Adsorption isotherms measurement indicates that DMSA adsorbs more strongly on chalcopyrite than on molybdenite.The frontier orbital calculation reveals that the two S atoms of DMSA molecule are active centers for the adsorption of the DMSA molecule on chalcopyrite surface.Fermi level calculation shows that chalcopyrite can obtain electrons from the DMSA molecule while molybdenite cannot.
基金the Materials&Components Technology Development Program(10080187)the Ministry of Trade,Industry&Energy(MI,Korea).
文摘To design an effective and realistically applicable sinter bonding process for power devices,we proposed a two-step process using a 200 nm Cu-particle-based paste to form a bondline having high-temperature sustainability and superior thermal conductance.This process involved rapid pressure-assisted sinter bonding in air followed by pressureless annealing in a nitrogen atmosphere.In the case of a paste prepared with a mixture of 20 wt.%malic acid and 80 wt.%ethylene glycol,sinter bonding at 300℃and 5 MPa for only 30 s resulted in a sufficient shear strength of 23.1 MPa.The shear strength was significantly enhanced to 69.6 MPa by the additional pressureless aging for 30 min.Therefore,the two-step sinter bonding process is expected to provide an outstanding production rate as a next-generation sinter bonding process.
基金supported by the National Natural Science Foundation of China(21462017)China Posdoctoral Science Foundation Funded Project(2014M560649)+2 种基金the Scientific Research Fund of Hunan Provincial Education Department(13B094)the Fund of Science and Technology Innovation and Entrepreneur for Hunan Young Talentsthe Project Sponsored by the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry for the financial and infrastructural assistance
文摘A simple and direct route for double C–C bond formation by copper-catalyzed Meerwein carboarylation process has been developed. In the presence of Cu I(5 mol%), tert-butyl nitrite and anilines, a wide variety of N-arylacrylamides underwent tandem Meerwein arylation/C–H cyclization to produce pharmaceutically important 3-benzyl-3-alkyloxindole in moderate to good yield.
