The results of the calculation of thermodynamic properties in liquid state for ternary Al-Ni-Zn alloys using the newest version of the general solution model for thermodynamic prediction are presented. Nine sections w...The results of the calculation of thermodynamic properties in liquid state for ternary Al-Ni-Zn alloys using the newest version of the general solution model for thermodynamic prediction are presented. Nine sections with different molar ratios of Ni to Zn, Zn to Al and Al to Ni were investigated in a temperature interval of 1800-2000 K. Partial and integral molar thermodynamic properties in liquid phase for the Al-Ni-Zn ternary system are determined and discussed.展开更多
Commercial pure aluminum and galvanized carbon steel were lap-welded using the weld-brazing(WB)technique.Three types of aluminum filler materials(4043,4047,and 5356) were used for WB.The joint strength and intermetall...Commercial pure aluminum and galvanized carbon steel were lap-welded using the weld-brazing(WB)technique.Three types of aluminum filler materials(4043,4047,and 5356) were used for WB.The joint strength and intermetallic compounds at the interface of three series of samples were analyzed and compared.Depending on the Si content,a variety of ternary Al-Fe-Si intermetallic compounds(IMCs) such as Fe_(4)(Al,Si)_(13),Fe_(2) Al_(8) Si(τ_(5)),and Fe_(2) Al_(9) Si_(2)(τ_(6)) were formed at the interface.Mg element in 5356 filler material cannot contribute to the formation of Al-Fe intermetallic phases due to the positive mixing enthalpy of Mg-Fe.The presence of Mg enhances the hot cracking phenomenon near the Al-Fe intermetallic compound at the interface.Zn coating does not participate in intermetallic formation due to its evaporation during WB.It was concluded that the softening of the base metal in the heat-affected zone rather than the IMCs determines the joint efficiency.展开更多
基金the frame of Project OI 172037 financed by the Ministry of Science and Technological Development Republic of Serbia and bilateral scientific and technological cooperation project between Republic of Serbia and China
文摘The results of the calculation of thermodynamic properties in liquid state for ternary Al-Ni-Zn alloys using the newest version of the general solution model for thermodynamic prediction are presented. Nine sections with different molar ratios of Ni to Zn, Zn to Al and Al to Ni were investigated in a temperature interval of 1800-2000 K. Partial and integral molar thermodynamic properties in liquid phase for the Al-Ni-Zn ternary system are determined and discussed.
基金Project(97.13966(97.11.15)) supported by the Deputy of Research and Technology of Arak University,Iran。
文摘Commercial pure aluminum and galvanized carbon steel were lap-welded using the weld-brazing(WB)technique.Three types of aluminum filler materials(4043,4047,and 5356) were used for WB.The joint strength and intermetallic compounds at the interface of three series of samples were analyzed and compared.Depending on the Si content,a variety of ternary Al-Fe-Si intermetallic compounds(IMCs) such as Fe_(4)(Al,Si)_(13),Fe_(2) Al_(8) Si(τ_(5)),and Fe_(2) Al_(9) Si_(2)(τ_(6)) were formed at the interface.Mg element in 5356 filler material cannot contribute to the formation of Al-Fe intermetallic phases due to the positive mixing enthalpy of Mg-Fe.The presence of Mg enhances the hot cracking phenomenon near the Al-Fe intermetallic compound at the interface.Zn coating does not participate in intermetallic formation due to its evaporation during WB.It was concluded that the softening of the base metal in the heat-affected zone rather than the IMCs determines the joint efficiency.
