期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
基于改进三胞模型考虑孔隙缺陷的三维四向编织复合材料多尺度力学性能分析 被引量:2
1
作者 张怀 李成 +1 位作者 刘乐 龚桂林 《复合材料科学与工程》 CAS 北大核心 2023年第2期14-23,共10页
编织复合材料在制造过程中不可避免地会出现孔洞缺陷,这些缺陷直接影响编织复合材料的力学性能。基于开源软件TexGen[1]实现编织复合材料内胞、面胞和角胞的参数化建模,在面胞和角胞模型中均考虑了纱线轨迹在空间中的偏移和受到打紧工... 编织复合材料在制造过程中不可避免地会出现孔洞缺陷,这些缺陷直接影响编织复合材料的力学性能。基于开源软件TexGen[1]实现编织复合材料内胞、面胞和角胞的参数化建模,在面胞和角胞模型中均考虑了纱线轨迹在空间中的偏移和受到打紧工序时纱线之间的相互挤压。利用random函数在微观尺度微观模型的基体中引入孔隙单元来模拟纤维束内干斑,在细观尺度上的三单胞模型基体中引入孔隙单元来模拟纤维束间孔隙,在宏观尺度上建立含内胞、面胞、角胞细观单元宏观均质模型对宏观弹性常数进行预测。结果表明:(1)孔隙率对细观尺度三类单胞模型的弹性常数影响程度不同;(2)纤维束内干斑孔隙对宏观弹性性能的影响要大于纤维束间孔隙,随着干斑孔隙率Pm增加,纵向泊松比减小,而随着纤维束间孔隙率Pn增加,纵向泊松比呈现出递增的趋势。 展开更多
关键词 维四向编织复合材料 孔隙率 三单胞模型 多尺度
下载PDF
三维五向编织复合材料的一种改进细观三单胞建模
2
作者 崔灿 杨化奎 +1 位作者 温巍 魏建军 《江苏工程职业技术学院学报》 2023年第4期1-8,共8页
基于三维五向编织复合材料的编织工艺,分析纤维束的运动轨迹及空间拓扑关系,建立了一种改进的细观三单胞(三单胞指内胞、面胞、角胞)模型。该模型假设纤维束的横截面形状在编织过程中发生渐进变化,考虑了纤维束间的相互挤压变形及扭转... 基于三维五向编织复合材料的编织工艺,分析纤维束的运动轨迹及空间拓扑关系,建立了一种改进的细观三单胞(三单胞指内胞、面胞、角胞)模型。该模型假设纤维束的横截面形状在编织过程中发生渐进变化,考虑了纤维束间的相互挤压变形及扭转弯曲特征,并确定了材料整体尺寸与各编织工艺参数间的关系,实现了三单胞模型的参数化建立。将模型理论预测值与实测值进行比较验证,结果表明,模型预测值与试样实测值比较吻合,且在织物排列结构的行数m和列数n相等时(编织角22.3°、26.5°时),两者吻合度最高,可见本模型适用性好,且对行列相等的织物排列结构尤为适用。 展开更多
关键词 维五向编织复合材料 维四步法编织工艺 细观三单胞模型 编织工艺参数
下载PDF
三维编织复合材料细观结构建模关键问题研究
3
作者 刘帅 王真 +2 位作者 卢国盛 刘芳 沈敏 《复合材料科学与工程》 CAS 北大核心 2024年第1期13-21,共9页
基于细观力学的数值分析方法是研究三维编织复合材料力学性能的有效方法,其中细观模型的建立是力学分析的基础。纤维束的空间走向和细观结构几何参数表征是细观结构建模中的两个关键问题。围绕这两个关键问题,针对三维四向编织复合材料... 基于细观力学的数值分析方法是研究三维编织复合材料力学性能的有效方法,其中细观模型的建立是力学分析的基础。纤维束的空间走向和细观结构几何参数表征是细观结构建模中的两个关键问题。围绕这两个关键问题,针对三维四向编织复合材料的三单胞模型开展研究,全面分析了单胞45°划分方式和水平划分方式中纤维束的各种空间走向,获得了详细的三单胞的纤维束方向余弦;针对三种形状的纤维束横截面,分析推导了编织工艺参数与单胞几何参数的复杂关系,利用编织工艺参数作为初始参数对单胞结构进行定量化表征,并获得了纤维束体积分数和纱线填充系数的计算方法。研究工作为三维多向编织复合材料的细观结构建模提供理论参考,具有一定的工程实用价值。 展开更多
关键词 维编织复合材料 细观结构 三单胞模型 纤维束 方向余弦
下载PDF
INCLINED LAMINAL COMBINATION MODEL OF 3D BRAIDED COMPOSITES
4
作者 周光明 王鑫伟 乔新 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 1995年第1期8-14,共7页
As an advanced composite material, the 3D braided composite has received more and more attention in foreign countries. However, it has received less attention in China. The geometric unit cell which can describe the b... As an advanced composite material, the 3D braided composite has received more and more attention in foreign countries. However, it has received less attention in China. The geometric unit cell which can describe the basic structure and the relationship between the braiding angle and geometric parameters of the fabric and fiber volume ratio are given in this paper based on two 3D braiding processes, namely, the four-step and the twostep ones. Several existing mechanical models to predict groperties of the 3D braided comPOsites are discussed and their shortcomings are pointed out herein. Then a new model called the inclined laminal combination model is proposed, which is based on the classical laminated plate theory and can predict the basic mechanical behavior of the two 3D braided composites with four-step or two-step braid. In the model, each yarn in the unit cell is regarded as an inclined laminate and then a 3D analysis is performed. It is found that the predicted mechanical properties of the 3D braided composites by the proposed model are compared well with the experimental data. 展开更多
关键词 COMPOSITES mechanical properties unit cell mechanical model 3D braided
下载PDF
The blood-brain barrier permeability of 20(S) and 20(R)-protopanaxatriol epimers and dammar-20(22)E,24-diene-3β,6α,12β-triol in MDCK-pHa MDR cell monolayer model 被引量:1
5
作者 郑怡然 吴秀稳 杨秀伟 《Journal of Chinese Pharmaceutical Sciences》 CAS CSCD 2017年第8期566-573,共8页
The blood-brain barrier permeability of 20(S) and 20(R)-protopanaxatriol epimers and dammar-20(22)E,24-diene- 313,6α,12β-triol were investigated using the MDCK-pHaMDR cell monolayer model. The bidirectional pe... The blood-brain barrier permeability of 20(S) and 20(R)-protopanaxatriol epimers and dammar-20(22)E,24-diene- 313,6α,12β-triol were investigated using the MDCK-pHaMDR cell monolayer model. The bidirectional permeability tests were carried out, and the apparent permeability coefficients (Papp) were calculated. The two protopanaxatriol epimers showed good permeability with Papp values of-10^-5 cm/s, whereas dammar-20(22)E,24-diene-3β,6α, 12β-triol showed poor permeability with Papp of 〈1 × 10^-7 cm/s. The three compounds showed differences in intracellular accumulations due to their different structures. Inhibition of P-gp with verapamil showed that the transport mechanisms in MDCK-pHaMDR cell monolayer for compounds 1 and 2 epimers were not only simple passive diffusion but also involving an effiux way mediated by P-gp. These findings provided new basis for the further study of compounds 1 and 2 acting on the brain. 展开更多
关键词 20(S)-Protopanaxatriol 20(R)-Protopanaxatriol Dammar-20(22)E 24-diene-3β 12β-triol MDCK-pHaMDR Permeability Blood-brain barrier
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部