Based on the particularities of gas outbursts,i.e.,low gas bearing capacity and low gas pressure in the "Three Soft" coal seam in western Henan,we applied the theories of plate tectonics and regional structu...Based on the particularities of gas outbursts,i.e.,low gas bearing capacity and low gas pressure in the "Three Soft" coal seam in western Henan,we applied the theories of plate tectonics and regional structural evolution to investigate the mechanism of this seam and its impact on the coal seam gas formation.Our investigation revealed that coal and gas outbursts are distributed in a strip in a NW direction,with a number of high-penetration mines scattered towards the south side and low-gas mines largely located on the north side.We analyzed the statistics of 38 gas explosions and the rock-coal sturdiness number coefficient f of 167 sampling sites in the region and found the gas outburst mechanism that features a "low indicator outburst phenomenon".The mechanism is characterized by structural coal as its core,a low gas bearing capacity,low gas pressure and sturdiness coefficient f mostly less than 0.3.Our research results provide a theoretical foundation for effective control of gas disasters.展开更多
Against the particularity of stratum-structure in ＂three soft＂ mine areas, according to rock indoor test and on-site sucking experiment, discussed the characteristics of argillization, compression fracture and sucki...Against the particularity of stratum-structure in ＂three soft＂ mine areas, according to rock indoor test and on-site sucking experiment, discussed the characteristics of argillization, compression fracture and sucking technique of soft coal with low permeability. It is clearly pointed out that the gas can be highly effectively sucked only by compression fracture along the occurrence of the coal seam, creating inter-seams crack belt because of the difference of bulgy deformation. After the flooding experiment in the 24080 workface of Pingdingshan No. 10 mine, the average single-bore volume of gas increases from 77 m3 to 7 893 mS, while decay cycle extended from 7 days to 80-90 days. Also, the single-bore extracting rate of gas increases to 33%.展开更多
Maceral composition and aromatic compounds were determined on columnsamples to study the peat-forming environments of Permian coal seam 2 and Carboniferouscoal seam 9^(-2) from the Xingtai coalfield,China.The macerals...Maceral composition and aromatic compounds were determined on columnsamples to study the peat-forming environments of Permian coal seam 2 and Carboniferouscoal seam 9^(-2) from the Xingtai coalfield,China.The macerals were dominated by inertinitein seam 2 and by vitrinite in seam 9^(-2).Three maceral groups were selected as indicatorsof peat-forming environments.Two triangle diagrams were drawn based on the indicatorsto explicate the peat-forming environments of permian seam 2 and Carboniferousseam 9^(-2).The results indicate that the peat of carboniferous seam 9^(-2) formed dominantlyin wet swamps,whereas the peat of Permian seam 2 formed dominantly in dry swampsand open moor environments.展开更多
Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SE...Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SEM)are employed to visualize and quantify morphological evolution characteristics of fractures in coal after LN2 thermal shocking treatments.LN2 thermal shocking leads to a denser fracture network than its original state with coal porosity growth rate increasing up to 183.3%.The surface porosity of theμCT scanned layers inside the coal specimen is influenced by LN2 thermal shocking which rises from 18.76%to 215.11%,illustrating the deformation heterogeneity of coal after LN2 thermal shocking.The cracking effect of LN2 thermal shocking on the surface of low porosity is generally more effective than that of high surface porosity,indicating the applicability of LN2 thermal shocking on low-permeability CBM reservoir stimulation.The characteristics of SEM scanned coal matrix in the coal powder and the coal block after the LN2 thermal shocking presented a large amount of deep and shallow progressive scratch layers,fracture variation diversity(i.e.extension,propagation,connectivity,irregularity)on the surface of the coal block and these were the main reasons leading to the decrease of the uniaxial compressive strength of the coal specimen.展开更多
基金support for this work,provided by the National Natural Science Foundation of China (No.50834005)
文摘Based on the particularities of gas outbursts,i.e.,low gas bearing capacity and low gas pressure in the "Three Soft" coal seam in western Henan,we applied the theories of plate tectonics and regional structural evolution to investigate the mechanism of this seam and its impact on the coal seam gas formation.Our investigation revealed that coal and gas outbursts are distributed in a strip in a NW direction,with a number of high-penetration mines scattered towards the south side and low-gas mines largely located on the north side.We analyzed the statistics of 38 gas explosions and the rock-coal sturdiness number coefficient f of 167 sampling sites in the region and found the gas outburst mechanism that features a "low indicator outburst phenomenon".The mechanism is characterized by structural coal as its core,a low gas bearing capacity,low gas pressure and sturdiness coefficient f mostly less than 0.3.Our research results provide a theoretical foundation for effective control of gas disasters.
文摘Against the particularity of stratum-structure in ＂three soft＂ mine areas, according to rock indoor test and on-site sucking experiment, discussed the characteristics of argillization, compression fracture and sucking technique of soft coal with low permeability. It is clearly pointed out that the gas can be highly effectively sucked only by compression fracture along the occurrence of the coal seam, creating inter-seams crack belt because of the difference of bulgy deformation. After the flooding experiment in the 24080 workface of Pingdingshan No. 10 mine, the average single-bore volume of gas increases from 77 m3 to 7 893 mS, while decay cycle extended from 7 days to 80-90 days. Also, the single-bore extracting rate of gas increases to 33%.
基金Supported by the National Natural Science Foundation of China(40773040)the National Basic Research Program of China (2003CB214607)
文摘Maceral composition and aromatic compounds were determined on columnsamples to study the peat-forming environments of Permian coal seam 2 and Carboniferouscoal seam 9^(-2) from the Xingtai coalfield,China.The macerals were dominated by inertinitein seam 2 and by vitrinite in seam 9^(-2).Three maceral groups were selected as indicatorsof peat-forming environments.Two triangle diagrams were drawn based on the indicatorsto explicate the peat-forming environments of permian seam 2 and Carboniferousseam 9^(-2).The results indicate that the peat of carboniferous seam 9^(-2) formed dominantlyin wet swamps,whereas the peat of Permian seam 2 formed dominantly in dry swampsand open moor environments.
基金Project(2017XKQY012)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SEM)are employed to visualize and quantify morphological evolution characteristics of fractures in coal after LN2 thermal shocking treatments.LN2 thermal shocking leads to a denser fracture network than its original state with coal porosity growth rate increasing up to 183.3%.The surface porosity of theμCT scanned layers inside the coal specimen is influenced by LN2 thermal shocking which rises from 18.76%to 215.11%,illustrating the deformation heterogeneity of coal after LN2 thermal shocking.The cracking effect of LN2 thermal shocking on the surface of low porosity is generally more effective than that of high surface porosity,indicating the applicability of LN2 thermal shocking on low-permeability CBM reservoir stimulation.The characteristics of SEM scanned coal matrix in the coal powder and the coal block after the LN2 thermal shocking presented a large amount of deep and shallow progressive scratch layers,fracture variation diversity(i.e.extension,propagation,connectivity,irregularity)on the surface of the coal block and these were the main reasons leading to the decrease of the uniaxial compressive strength of the coal specimen.
