期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
复杂薄壁深筒零件三次分型压铸型 被引量:4
1
作者 田福祥 《铸造》 CAS CSCD 北大核心 2005年第5期520-521,共2页
给出了复杂薄壁深筒零件箱形外壳压铸型的实用结构。该模具采用三次分型结构和推件板卸件,解决了铸件小端薄壁处排气和薄壁深筒的脱型问题。
关键词 压铸型 中心浇道 余料切除机构 三次分型 滑块
下载PDF
手表表架注射模具设计
2
作者 王建玲 安凯浩 李博 《塑料》 CAS CSCD 北大核心 2021年第3期73-77,共5页
利用UG对手表表架及模具进行三维造型。对手表表架进行了工艺性分析,该塑件由空心的椭圆柱体和最大轮廓平台构成,空心椭圆柱体内有一定的斜度,需要两侧侧向分型抽芯结构。将分型面选在最大轮廓平面,有利于开模和推出机构的推出。空心椭... 利用UG对手表表架及模具进行三维造型。对手表表架进行了工艺性分析,该塑件由空心的椭圆柱体和最大轮廓平台构成,空心椭圆柱体内有一定的斜度,需要两侧侧向分型抽芯结构。将分型面选在最大轮廓平面,有利于开模和推出机构的推出。空心椭圆柱体顶部有利于放置浇口,塑件材料为ABS,浇口的类型为点浇口,将点浇口设置在空心椭圆柱体顶部的曲面上。在定模成型时,空心椭圆柱体与最大轮廓平台之间构成较深的不规则凹槽,导致脱模较为困难,但是,在空心椭圆柱体的外侧和最大轮廓平台之间有异形通孔,将固定在动模板的凸模穿过该通孔,使动模部分成型,构成局部镶嵌式凹模,能够避免该侧凹阻碍脱模。设计了空形椭圆柱体两侧型芯侧向抽芯机构,模具布局为一模两腔,设置了3个分型面,利用反锥度穴实现多型腔点浇口浇注系统凝料的自动脱落,实现了自动化操作,提高了生产效率。 展开更多
关键词 手表表架 自动脱浇 局部镶嵌式凹模 三次分型 斜导柱侧抽芯
下载PDF
线圈骨架注射模设计
3
作者 卢毓伟 《模具制造》 2003年第9期36-37,共2页
分析了漆包线线圈骨架的工艺特点,介绍了注射模结构及模具工作过程,根据塑件特点,该模具采用三次分型、四点浇口自动切断及双锥形滑块侧向抽芯、推管推出的结构形式,从而实现了大批量全自动连续生产。
关键词 线圈骨架 注射模 三次分型 锥形滑块 设计 漆包线 电机
下载PDF
充电器滑道注射模设计
4
作者 刘继彦 丁志强 刑树库 《模具工业》 北大核心 2001年第8期35-36,共2页
介绍了斜向及直向同时进行脱模发生干涉时采用的三次分型顺序脱模的方法 ,该方法解决了干涉现象 ,达到了顺序脱模 。
关键词 三次分型 锁扣 成型滑块 顺序脱模 充电器滑道 注塑 注射模
下载PDF
Risk assessment of water inrush in tunnels based on attribute interval recognition theory 被引量:4
5
作者 WANG Sheng LI Li-ping +3 位作者 CHENG Shuai HU Hui-jiang ZHANG Ming-guang WEN Tao 《Journal of Central South University》 SCIE EI CAS CSCD 2020年第2期517-530,共14页
Water inrush is one of the most serious geological hazards in underground engineering construction.In order to effectively prevent and control the occurrence of water inrush,a new attribute interval recognition theory... Water inrush is one of the most serious geological hazards in underground engineering construction.In order to effectively prevent and control the occurrence of water inrush,a new attribute interval recognition theory and method is proposed to systematically evaluate the risk of water inrush in karst tunnels.Its innovation mainly includes that the value of evaluation index is an interval rather than a certain value;the single-index attribute evaluation model is improved non-linearly based on the idea of normal distribution;the synthetic attribute interval analysis method based on improved intuitionistic fuzzy theory is proposed.The TFN-AHP method is proposed to analyze the weight of evaluation index.By analyzing geological factors and engineering factors in tunnel zone,a multi-grade hierarchical index system for tunnel water inrush risk assessment is established.The proposed method is applied to ventilation incline of Xiakou tunnel,and its rationality and practicability is verified by comparison with field situation and evaluation results of other methods.In addition,the results evaluated by this method,which considers that water inrush is a complex non-linear system and the geological conditions have spatial variability,are more accurate and reliable.And it has good applicability in solving the problem of certain and uncertain problem. 展开更多
关键词 water inrush risk assessment attribute interval recognition model TFN-AHP
下载PDF
自动脱螺纹的水杯盖三板注塑模具设计 被引量:13
6
作者 池寅生 陈建锋 +1 位作者 孙庆东 徐小青 《塑料科技》 CAS 北大核心 2015年第5期77-80,共4页
以水杯盖为实例,探讨了具有内螺纹和侧孔的杯盖注塑模具设计方法、要点及其工作过程。对模具定模一侧斜导柱抽芯机构、液压齿轮联合传动的自动旋脱螺纹机构等的设计方法作了深入阐述。该模具结构复杂、实用可靠,对此类塑件的注塑模具设... 以水杯盖为实例,探讨了具有内螺纹和侧孔的杯盖注塑模具设计方法、要点及其工作过程。对模具定模一侧斜导柱抽芯机构、液压齿轮联合传动的自动旋脱螺纹机构等的设计方法作了深入阐述。该模具结构复杂、实用可靠,对此类塑件的注塑模具设计具有参考作用。 展开更多
关键词 注塑模具 点浇口 侧抽芯 自动旋脱螺纹 推件板 三次分型
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部