期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
用溶胶—胶体法制成Al2O3—SiC复合材料特性
1
作者 Xu,Y 《建材新科技》 1997年第1期58-59,共2页
关键词 陶瓷 复合材料 三氧化工程 碳化硅 溶胶-胶体法
下载PDF
A Case Study on Construction Dewatering-lnduced Settlement Damage: Could This Have Been Avoided?
2
作者 Robert L. Mokwa Leonard P. Mokwa Timothy P. Mokwa 《Journal of Civil Engineering and Architecture》 2011年第8期670-678,共9页
A homeowner reported extensive settlement damage approximately two weeks after the groundwater in the vicinity of the home was lowered at a nearby construction project. The infrastructure improvement project consisted... A homeowner reported extensive settlement damage approximately two weeks after the groundwater in the vicinity of the home was lowered at a nearby construction project. The infrastructure improvement project consisted of installing a 27-inch-diameter sanitary sewer main with an invert elevation about 19 ft below existing grade. Groundwater was lowered 12 ft during construction, down to a depth of 23 ft below existing grade. This paper addresses the following key questions regarding settlement and potential structural damage as a result of a temporary drop in groundwater caused by construction dewatering: (1) How could a decrease in groundwater elevation cause settlement? (2) Is this a highly unusual or atypical phenomenon that cannot be explained or estimated using science and engineering techniques available to the engineering profession? (3) Based on the standard of care at the time, should these problems have been anticipated, or at least examined, by the engineering firms engaged on this project? Answers to these questions are addressed herein using results from geotechnical analyses and data obtained from laboratory and in-situ tests. 展开更多
关键词 CONSOLIDATION de-watering construction claim geotechnical uncertainties.
下载PDF
不同制备方法镧改性对γ-Al_2O_3的高温热稳定作用研究 被引量:14
3
作者 王敬先 刘勇 +1 位作者 何阿弟 陈晓银 《复旦学报(自然科学版)》 CAS CSCD 北大核心 2000年第4期450-454,共5页
用浸渍法以及sol gel方法制备了镧改性的Al2 O3 ,考察了x(La2 O3 ) /x(Al2 O3 )为 0 .0 0 5~ 0 .10时 ,热处理温度 (6 0 0~ 115 0℃ )及制备方法等因素对Al2 O3 的热稳定作用的影响 .BET比表面积和粉末X光衍射结果表明 ,高温下镧物种... 用浸渍法以及sol gel方法制备了镧改性的Al2 O3 ,考察了x(La2 O3 ) /x(Al2 O3 )为 0 .0 0 5~ 0 .10时 ,热处理温度 (6 0 0~ 115 0℃ )及制备方法等因素对Al2 O3 的热稳定作用的影响 .BET比表面积和粉末X光衍射结果表明 ,高温下镧物种的引入能显著地抑制氧化铝比表面积的损失和α相变 ,而且制备方法和过程不同 ,对Al2 O3 的改性效果也不同 .x(La2 O3 ) /x(Al2 O3 )为 0 .0 2时 ,镧对Al2 O3 有较好的高温热稳定作用 ,当x(La2 O3 ) /x(Al2 O3 )增加到 0 .10以上时 ,高温热稳定作用降低 . 展开更多
关键词 热稳定性 三氧化工程 催化剂
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部