期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
AlCl_3催化1,1,1-三甲基-2,2,2-三氯二硅烷裂解的理论研究 被引量:2
1
作者 徐文媛 龙威 +2 位作者 杜瑞焕 郝伟 李敏 《郑州大学学报(理学版)》 CAS 北大核心 2012年第1期96-101,共6页
结合采用DFT(B3LYP)及二级微扰方法对AlCl3催化1,1,1-三甲基-2,2,2-三氯二硅烷裂解反应的机理进行了研究.通过计算数据结果表明,此裂解反应为放热反应,理论产率比较高.反应可以同时按2种通道进行,其中通道2反应较为容易,其3步反应的焓... 结合采用DFT(B3LYP)及二级微扰方法对AlCl3催化1,1,1-三甲基-2,2,2-三氯二硅烷裂解反应的机理进行了研究.通过计算数据结果表明,此裂解反应为放热反应,理论产率比较高.反应可以同时按2种通道进行,其中通道2反应较为容易,其3步反应的焓变依次为:ΔH1(86.963 kJ.mol-1),ΔH2(-237.596 kJ.mol-1),ΔH3(-127.568 kJ.mol-1).通道2的各步正反应活化能数值表明,第3步为速控步,其正反应的活化能E3为214.913 kJ.mol-1. 展开更多
关键词 1 1 1-三甲基-2 2 2-三氯 理论研究 反应机理
下载PDF
甲基氯硅烷高沸物制备高沸硅油的折光率研究
2
作者 曹松 罗烨栋 +7 位作者 浩瀚 周傲 郭圆 疏龙生 曾兴旺 马锋 胡世焱 于小康 《有机硅材料》 CAS 2024年第6期55-58,共4页
对直接法合成二甲基二氯硅烷单体过程中副产的甲基氯硅烷高沸物进行水解、中和、水洗、相分离制得高沸硅油。研究了高沸物中三甲基三氯二硅烷及二甲基四氯二硅烷的共含量对I型高沸硅油产品质量的影响。结果表明,高沸硅油折光率与有机硅... 对直接法合成二甲基二氯硅烷单体过程中副产的甲基氯硅烷高沸物进行水解、中和、水洗、相分离制得高沸硅油。研究了高沸物中三甲基三氯二硅烷及二甲基四氯二硅烷的共含量对I型高沸硅油产品质量的影响。结果表明,高沸硅油折光率与有机硅高沸物中三甲基三氯二硅烷及二甲基四氯二硅烷共含量呈正相关性,且在一定范围内呈线性关系。 展开更多
关键词 甲基 高沸物 高沸 折光率 甲基三氯 甲基四氯二
下载PDF
炉温对化学气相沉积SiC涂层组成及显微结构的影响 被引量:5
3
作者 刘荣军 周新贵 +1 位作者 张长瑞 曹英斌 《国防科技大学学报》 EI CAS CSCD 北大核心 2002年第6期23-26,共4页
采用SEM、EDX、XRD测试手段对沉积炉壁产物进行了分析,结果表明:低温区沉积的SiC涂层全为β SiC;高温区SiC涂层中含有少量的游离态Si和α SiC;高温区SiC颗粒的形核和生长速率大于低温区;所以温度是影响化学气相沉积SiC涂层组成及显微结... 采用SEM、EDX、XRD测试手段对沉积炉壁产物进行了分析,结果表明:低温区沉积的SiC涂层全为β SiC;高温区SiC涂层中含有少量的游离态Si和α SiC;高温区SiC颗粒的形核和生长速率大于低温区;所以温度是影响化学气相沉积SiC涂层组成及显微结构的主要因素。 展开更多
关键词 涂层组成 显微结构 炉温梯度 化学气相沉积 SIC涂层 碳化陶瓷材料 三氯甲基硅烷
下载PDF
Modification of methyl oleate for silicon-based biological lubricating base oil 被引量:2
4
作者 Shixing Cui Zhi Yun Xia Gui 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2017年第1期130-136,共7页
A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative ... A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h. 展开更多
关键词 Methyl oleate Trimethyl chlorosilane Acid binding agent N N-diisopropylethylamine Lubricity Silicon-based biological lubricating base oil
下载PDF
Chemical vapor deposition of SiC at different molar ratios of hydrogen to methyltrichlorosilane 被引量:1
5
作者 杨艳 张伟刚 《Journal of Central South University》 SCIE EI CAS 2009年第5期730-737,共8页
Chemical vapor deposition(CVD) of SiC from methyltrichlorosilane(MTS) was studied at two different molar ratios of H2 to MTS(n(H2) /n(MTS) ) . The total pressure was kept as 100 kPa and the temperature was varied from... Chemical vapor deposition(CVD) of SiC from methyltrichlorosilane(MTS) was studied at two different molar ratios of H2 to MTS(n(H2) /n(MTS) ) . The total pressure was kept as 100 kPa and the temperature was varied from 850 to 1 100 ℃ at a total residence time of 1 s. Steady-state deposition rates as functions of reactor length and of temperature,investigated at different n(H2) /n(MTS) values,show that hydrogen exhibits strongly influences on the deposition rate. Especially,the deposition of Si co-deposit can be obtained in broader substrate length and at higher temperatures with increasing hydrogen partial pressure. Influence of hydrogen on the deposition process was also studied using gas phase composition and deposit composition analysis at various n(H2) /n(MTS) . SEM micrographs directly show the variation of surface morphologies at various n(H2) /n(MTS) . It can be found that the crystal grain of the deposit at 1 100 ℃ is better developed and the crystallization is also improved with increasing n(H2) /n(MTS) . 展开更多
关键词 METHYLTRICHLOROSILANE silicon carbide H2 MTS
下载PDF
Isobaric Vapor-Liquid Equilibrium for Methyldichlorosi-lane+Methylvinyldichlorosilane+Toluene and Constituent Binary Systems 被引量:8
6
作者 余淑娴 余祖兵 +1 位作者 邱祖民 孙韡 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2003年第2期213-216,共4页
Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliome... Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliometer. The equilibrium compositions of the vapor phase of binary systems were calculated indirectly from the total pressure-temperature-liquid composition (pTx). The experimental data were correlated with the Wilson and NRTL(non-random two liquid) equations. The parameters of the Wilson model were employed to predict the ternary VLE data. The calculated boiling points were in good agreement with the experimental ones. 展开更多
关键词 METHYLDICHLOROSILANE methylvinyldichlorosilane TOLUENE vapor-liquid equilibrium
下载PDF
Isobaric vapor-liquid equilibrium for methyldichlorosilane-methyltrichlorosilane-dimethyldichlorosilane system
7
作者 邱祖民 谢心亮 +1 位作者 罗美 谢凤霞 《Journal of Zhejiang University-Science B(Biomedicine & Biotechnology)》 SCIE CAS CSCD 2005年第6期559-562,共4页
The elucidation of vapor-liquid equilibrium (VLE) of the halogenated silane was necessary for the production of silicon derivatives, especially for methylvinyldichlorosilane, due to the lack of the relevant reports. I... The elucidation of vapor-liquid equilibrium (VLE) of the halogenated silane was necessary for the production of silicon derivatives, especially for methylvinyldichlorosilane, due to the lack of the relevant reports. Isobaric VLE for the system methyldichlorosilane-dimethyldichlorosilane-benzene and isobaric VLE of the three binary systems were measured with a new pump-ebulliometer at the pressure of 101.325 kPa. These binary compositions of the equilibrium vapor were calculated according to the Q function of molar excess Gibbs energy by the indirect method and the resulted VLE data agreed well with the thermo-dynamic consistency. Moreover, the experimental data were correlated with the Wilson, NRTL, Margules and van Laar equations by means of the least-squares fit, the acquired optimal interaction parameters were fitted to experimental vapor-liquid equilibrium data for binary systems. The binary parameters of Wilson equation were also used to calculate the bubble point temperature and the vapor phase composition for the ternary mixtures without any additional adjustment. The predicted vapor-liquid equilibrium for the ternary system was in a good agreement with the experimental results. The VLE of binary and multilateral systems provided essential theory for the production of the halogenated silane. 展开更多
关键词 EBULLIOMETER Vapor-liquid equilibrium METHYLDICHLOROSILANE DIMETHYLDICHLOROSILANE BENZENE
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部