五指山“三片叶”发展的对策建议

近年来,五指山市不断做精做优茶叶、雪茄烟叶、野菜叶“三片叶”文章,将其打造成为农民增收致富的“黄金叶”。通过对五指山“三片叶”取得成效与存在问题的分析,提出茶产业方面应做好种质资源挖掘利用、筛选培育优良独特品种、以全域有机理念建设茶园基地、加快茶产业融合与品牌打造;雪茄烟叶方面应做好良种繁育、优化产业布局、提升机械化水平、加快“雪茄烟叶+”产业模式;野菜产业方面应持续开展野菜资源收集保存与开发利用、做好资源驯化栽培与标准化生产、强化产后处理、推行野菜共享经济模式等建议,以期为五指山“三片叶”产业发展提供借鉴。

三片落叶

秋天转眼间就到了，高大的树上，叶子都纷纷飘落下来。有三片树叶聚到了一起，它们交谈起来。

Effects of Ratio of Row Spacing to Intrarow Spacing on Yield and Top Three Leaves of Super High-yielding Early and Late Rice

Using a split plot design, super high-yielding early rice ＆quot;Zhongjiazao 17＆quot;and ＆quot;Ganxin 203＆quot; and super high-yielding late rice ＆quot;Ganxin 688＆quot; and ＆quot;Wufengy-ouT025＆quot; were taken as materials with planting density the same at 312 000 hil s/hm2, to explore the effects of RS/IS （Ratio of row spacing to intrarow row spacing） on yield, top three leaves morphological features and its relationship of them in 2011 and 2012. The results showed that, whether early or late rice, biomass, accumula-tion and apparent utilizing rate of nitrogen were lower in RS/IS5.0 （40.0 cm ＆#215;8.0 cm） treatment, but yield of rice was higher in RS/IS2.0 （25.0 cm ＆#215;12.8 cm） treatment;grain numbers per spike of rice was more in RS/IS2.8 （30.0 cm＆#215;10.7 cm） treatment, and thousand-grain weight of rice was higher in RS/IS1.3 （20.0 cm＆#215;16.0 cm） treat-ment. For 4 varieties of early or late rice aforementioned, basal angle, opening an-gle and leaf area of 2nd leaf from top were larger in RS/IS5.0 treatment, and basal angle and opening angle were smal er in RS/IS2.0 treatment and leaf area smal er in RS/IS1.3 treatment.

Effects of Remaining Leaf Combining with IBA on Rooting,Physiological and Biochemical Indicators of Leaves from Bougainvillea spectabilis Cuttings

[Objective] The research aimed to discuss the effects on rooting,physiological and biochemical indicators of Bougainvillea spectabilis cuttings by remaining leaf combining with soaking cuttings in IBA.[Method] Effects of remaining leaf combining with IBA on rooting,physiological and biochemical indicators of B.spectabilis cuttings were studied under the regulation and control of intelligent seed propagation system,and then set four treatments：remaining leaf combining with soaking in clean water,remaining leaf combining with soaking in IBA,defoliation combining soaking in clean water,and defoliation combining with soaking in IBA.[Result] The soluble sugar content was high,but indoleacetic acid oxidase activity was lower in the initial stage of adventitious root differentiation in treatment of remaining leaf.While the rooting number,root length,the root mass growth and survival rate of cutting were obviously higher than that in treatment of defoliation.Compared to the treatment soaking in clean water,the treatment soaking in 500×10^-6 IBA increased the soluble sugar content in leaves of cuttings and enhanced rooting of cuttings.[Conclusion] The survival rate and rooting of cuttings improved obviously in the treatment of remaining leaf combining with soaking in 500×10^-6 IBA before cutting under the regulation and control of intelligent seed propagation system.

Preliminary Study on Electron Crystallography of 27 kD LHC-Ⅱ Complex from Cucumber

Cucumber ( Cucumis sativus L.) LHC_Ⅱ complex, which consists of only one subunit (27 kD), was isolated and purified. 2_D crystallization was performed by batch method. The crystal is 0.7 μm×1.0 μm, and diffracts to 30 ?. The projection map of the negatively stained two_dimensional crystal of LHC_Ⅱ complex shows that the crystal has p3 symmetry, lattice constant 15.4 nm×15.4 nm, which is different from the LHC_Ⅱ of spinach (Spinacia oleracea L.) and pea (Pisum satium L.). A continuous tomographic tilt series, containing 12 projections from the two_dimensional crystal was subjected to 3_D reconstruction. The 3_D model represents that LHC_Ⅱ complex consists of 6 monomers. These trimer and dimer interactions build up the six member ring.

A Force-Based Grid Manipulator for ALE Calculations in a Lobe Pump

In this paper, a time-dependant calculation of flow in a lobe pump is presented. Calculations are performed using the arbitrary Lagrangean Eulerean (ALE) method. A grid manipulator is needed to move the nodes between time steps. The used grid manipulator is based on the pseudo-force idea. This means that each node is fictitiously connected with its 8 neighbours via fictitious springs. The equilibrium of the resulting pseudo spring forces defines the altered position of the nodes. The grid manipulator was coupled with a commercial flow solver and the whole was tested on the flow through a three-lobe lobe pump. Results were obtained for a rotational speed of 460 rpm and incompressible silicon oil as fluid.

Unsteady Flow Field under Surge and Rotating Stall in a Three-stage Axial Flow Compressor

The unsteady flow structure between rotor blade-to-blade passages in a three-stage axial flow compressor is experimentally investigated by detailed measurements of unsteady performance characteristics,casing wall pressure fluctuations and their wavelet analyses.The main feature of the test compressor is a capacity tank facility connected in series to the compressor outlet in order to supply compression and/or expansion waves from downstream of the compressor.Research attention is focused on the post-stall characteristics of the surge and rotating stall which occur simultaneously.The influence of the compressor operating point on the unsteady performance curve shows that the surge cycle changes irregularly depending on the steady-state resistance characteristics,and the results of the wavelet analyses of the wall pressure fluctuations suggest that the surge cycle may selectively be determined by the rotating stall cell structure within the rotor cascade.

Three Dimensional Numerical Analysis of Flow within an Isolated Rotor with Stepped Blades

Every compressor works in a limited operational range. Surge as one of the sources of this limitation has been studied for many years. In this research, an isolated blade row of compressor rotor is numerically modeled and solved. In order to improve operational limit and postpone the surge occurrence, a stepped blade of RAF6E with higher stall angle of attack is used to investigate the near stall flow behavior. In this study, several location of step on blades are tried and the results are compared with the case with no step on blades. It is shown that, as the step moves toward the leading edge of blades, the effect of delay on surge is reduced and even efficiency is also decreased significantly. By moving the step towards the trailing edge, surge is delayed due to the reattachment of flow after the step. Efficiency is also decreased but not in the order of the previous case.

Aerodynamics Design of Two-stage Vane-less Counter-rotating Turbinec

It is one of the most efficient ways to greatly improve aero-engines' performance by utilizing vaneless counterrotating turbine(VCRT) technology.To supply sufficient power,VCRT turns to be high Mach number,large flow angle at high-pressure turbine(HPT) rotor exit,and low blade camber angle,which increase difficulties to turbine design.As the axial velocity ratio of HPT rotor is much larger than the conventional ones,the optimal selection of VCRT velocity triangles based on theoretical analysis is developed,and how the efficiency varied by HPT stator/rotor exit flow angle is also figured out.The key points to design a high efficient practicable VCRT are to select velocity triangles that are characterized by low flow coefficient,high outlet flow angle and large axial velocity ratio of HPT rotor.Meanwhile,performance comparison between convergent blade and convergent-divergent blade shows the latter is more appropriate for VCRT.