三甲基硅化腈在有机合成中的应用

三甲基硅化腈是一种常用的有机合成试剂.对近年来三甲基硅化腈在有机合成中的应用进行了简要的总结和概述,重点介绍了三甲基硅化腈作为强的亲核试剂广泛用于环氮和环氧化合物的开环反应、亚胺和醛酮类化合物的加成、胺与醛或酮参与的多组分反应、偶联反应以及对炔和具有较高活性的碳碳双键的氰化加成等反应。

笼形八聚(三甲基硅氧基)倍半硅氧烷的合成

报道了笼形八聚 (三甲基硅氧基 )倍半硅氧烷的合成 ,以等摩尔的四乙氧基硅烷Si(OC2 H5 ) 4与四甲基氢氧化铵Me4NOH在水溶液中进行水解缩合 ,可选择性地生成正立方体的八聚硅酸盐 [(Me4NO)SiO1.5 ]8,该化合物与三甲基氯硅烷进行三甲基硅化反应 ,得到了三甲基硅氧基取代的八聚笼形倍半硅氧烷 [(Me3 SiO)SiO1.5 ]8.合成的化合物分别用元素分析 ,FT IR ,1HNMR ,13 CNMR ,2 9SiNMR进行了表征 .

Modification of methyl oleate for silicon-based biological lubricating base oil

A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.

Chemical vapor deposition of SiC at different molar ratios of hydrogen to methyltrichlorosilane

Chemical vapor deposition(CVD) of SiC from methyltrichlorosilane(MTS) was studied at two different molar ratios of H2 to MTS(n(H2) /n(MTS) ) . The total pressure was kept as 100 kPa and the temperature was varied from 850 to 1 100 ℃ at a total residence time of 1 s. Steady-state deposition rates as functions of reactor length and of temperature,investigated at different n(H2) /n(MTS) values,show that hydrogen exhibits strongly influences on the deposition rate. Especially,the deposition of Si co-deposit can be obtained in broader substrate length and at higher temperatures with increasing hydrogen partial pressure. Influence of hydrogen on the deposition process was also studied using gas phase composition and deposit composition analysis at various n(H2) /n(MTS) . SEM micrographs directly show the variation of surface morphologies at various n(H2) /n(MTS) . It can be found that the crystal grain of the deposit at 1 100 ℃ is better developed and the crystallization is also improved with increasing n(H2) /n(MTS) .

Synthesis, characterization of triphenyltin grafted on SBA-15mesoporous silica and its catalytic performance for the synthesis of 4-methylacetophenone

The production of Ph3Sn–O–SBA-15(Ph3Sn SBA)was achieved by heating triphenyltin chloride and SBA-15in N-methylpyrrolidone at 190°C for 5 h using triethylamine as a catalyst.The composition,structure,and surface physical and chemical properties of Ph3Sn SBA were characterized using inductively coupled plasma-atomic emission spectroscopy(ICP-AES),13C,119Sn and29Si solid-state nuclear magnetic resonance(NMR)spectroscopy in situ pyridine infrared spectroscopy(Py-IR),N2adsorption–desorption isotherms,X-ray diffraction(XRD)and transmission electron microscopy(TEM).The results of ICP-AES and organic elemental analysis showed that the grafting yield of Sn was 17%(by mass)for Ph3Sn SBA.The elemental analysis and solid-state NMR results for Ph3Sn SBA were consistent with grafting of triphenyltin on SBA-15.The N2adsorption–desorption,XRD and TEM analyses showed that Ph3Sn SBA retained an ordered hexagonal mesoporous structure,resulting in decreases in the surface area,pore size and mesopore volume,and an increase in acidity as compared with SBA-15.The Hammett acidity function(H0)value and the number of acid sites for Ph3Sn SBA,obtained by the Hammett methods,were 2.77–3.30 and 2.07 mmol·g-1,respectively.The Friedel–Crafts acylation of toluene and acetic anhydride over Ph3Sn SBA was investigated.The yield of methylacetophenone(MAP)and the selectivity for 4-methylacetophenone(PMAP)were 79.56%and 97.12%,respectively,when the conditions were n(toluene):n(anhydride)=2.0:1.0 with 6%(by mass)catalyst,and heating under reflux for 5 h.The PMAP selectivity still reached 93.11%when Ph3Sn SBA was used for the fifth time under the same reaction conditions.

Highly Efficient Asymmetric Transcyanation of Acetyltrimethylsilane with Acetone Cyanohydrin Catalyzed by (R)-Oxynitrilase from Prunus Japonica Seed Meal

Highly efficient asymmetric transcyanation of acetyltrimethylsilane with acetone cyanohydrin in an aqueous/organic biphasic system catalyzed with （R）-oxynitrilase from defatted Prunus Japonica seed meal for the preparation of optically active （R）-2-trimethylsilyl-2-hydroxyl-propionitrile was successfully carried out for the first time. For better understanding of the reaction, various influential variables were examined with respect to the initial reaction rate, the substrate conversion and the product enantiomeric excess （e.e.）. Diisopropyl ether was found to be the best organic phase for this reaction among all the organic solvents tested. The optimal concentrations of Prunus Japonica seed meal powder, acetyltrimethylsilane and acetone cyanohydrin, volume ratio of aqueous phase to organic phase, buffer pH value and the reaction temperature were 34.5g·L^-1 and 14mmol· L^-1, 28mmol· L^-1, 13% （by volume）, 5.0 and 30℃, respectively, while the initial reaction rate, the substrate conversion and the product enantiomeric excess were 1.34 mmol·L^-1·h^-1, 99.0% and 99.0%, respectively. The comparative study demonstrated that silicon atom in substrate showed great effect on the reaction and acetyltrimethylsilane was a much better substrate for （R）-hydroxynitrile lyase from Prunus Japonica seed than its carbon analogue 3,3-dimethyl-2-butanone.

Synthesis of Thiol-functionalized Mesoporous Materials for Hg2. Trapping

Mesoporous silica materials with uniform channels containing functionalized organic monolayers have been synthesized by grafting a thiol functional group, （3-Mercaptopropyl） trimethoxysilane （MPTMS）. A new approach to heavy metal ion adsorbents based on the covalent grafting of MPTMS groups to the framework pore walls of mesoporous silica molecular sieves has been developed and investigated with regard to hydroxyl group densities, channel dimensions, morphologies and reaction conditions. Results show that the ordered mesostructures of functionalized samples were retained after modification and the thiol functional group was immobilized mainly inside the mesopore channel. The relative surface coverage of the monolayer can be systematically varied up to 95%. The functionalized hybrid materials show exceptional selectivity and capacity for removing mercury from aqueous waste stream with distribution coefficients up to 435,000. The regenerated material show high mercury ion uptake capacity of 2.87 mmol/g （86.5%）.

Determination of free fatty acids in rabbit plasma by GC-MS after trimethylsilylation derivatization

In the present study, free fatty acids(FFAs, including palmitic acid, stearic acid, oleic acid, linoleic acid and arachidonic acid) in rabbit plasma were determined by gas chromatography-mass spectrometry(GC-MS) after trimethylsilylation derivatization using N,O-bis(trimethylsilyl)trifluoroacetamide(BSTFA) – trimethylchlorosilane(TMCS) as derivatization reagent. The experimental conditions, including extraction and silylation reaction, were investigated. The method was experimentally validated. The linearity between fatty acids’ peak areas and their concentrations was obtained with the corelative coefficient(r2) all more than 0.999, and the recoveries were between 82% and 111%. The intra-day variations of FFAs’ in plasma samples at different concentrations were all less than 6%. FFA analysis results of 16 rabbit plasma samples showed that the method could be well applied in the determination of plasma samples in vivo. In contrast to the traditional method of FFA derivatization, the established trimethylsilylation method presented simplicity, high specificity, and completely free from the interference of the esterified fatty acid, such as triacylglyceride. The method could be applied for analyzing FFA profiles in the clinical laboratory or pharmacological research.

Post-functionalization of disubstituted polyacetylenes via click chemistry

We report a synthetic design and the experimental exploration of preparation of disubstituted polyacetylenes （PAs, P3） through 1,3-dipolar cycloaddition of azides with precursor PA bearing alkyne pendants. The precursor PA （P2） was derived by desilylation of the pristine PA with trimethylethynylsilane side chains （P1）. P1 was obtained by polymerization of a dual-alkyne containing monomer with one of the alkynes end-capping by trimethylsilane （M） under the promotion of WC16-Ph4Sn catalyst. Two synthetic routes, i.e. two-steps （from P1 to P3 via precursor P2） and one-pot （from P1 to P3 without separation and purification of P2） were tried and the results indicated that one-pot strategy is more facile and resultant P3-1 showed higher purity and higher molecular weight than the resultant of P3-2. By using the techniques such as GPC, FTIR and 1H NMR spectroscopy the polymerization behavior and the structures of the polymers were well characterized.