The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is abl...The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.展开更多
An optical technique for 3 D shape measurement is presented. This technique, based on a deformed projected grating pattern which carries 3 D information of the measured object, can automatically and accurately obtain ...An optical technique for 3 D shape measurement is presented. This technique, based on a deformed projected grating pattern which carries 3 D information of the measured object, can automatically and accurately obtain the phase map of a measured object by using one step phase shift algorithm.In comparison with traditional phase shift technique, the technique is much faster, with the equivalent accuracy. Only one frame image is sufficient for measuring. Experimental result of typical object is presented.展开更多
Currently,with the fast development of GPS technique,GPS RTK is rapidly being applied to the cadastral survey. GPS RTK technique not only improves efficiency and accelerates the rate of mapping,but also increases econ...Currently,with the fast development of GPS technique,GPS RTK is rapidly being applied to the cadastral survey. GPS RTK technique not only improves efficiency and accelerates the rate of mapping,but also increases economic efficiency. The authors introduced a method for GPS RTK rapid positioning,which uses continuous operational reference system (CORS) as a base station to change the method of previous map drawing by obtaining real-time three-dimensional coordinates of boundary points and statistically analyzing with the three-dimensional coordinates obtained by Total Station to get the accuracy of GPS RTK real-time coordinates. The application of GPS RTK in practical measurement was discussed when the data link had been lost especially. The results show that the three-dimensional coordinates measured by total station can be replaced by real-time three-dimensional coordinates measured by Engineering Star RTK in the CORS.展开更多
The existing surface roughness standards comprise only two dimensions. However, the real roughness of the surface is 3D （three-dimensional）. Roughness parameters of the 3D surface are also important in analyzing the...The existing surface roughness standards comprise only two dimensions. However, the real roughness of the surface is 3D （three-dimensional）. Roughness parameters of the 3D surface are also important in analyzing the mechanics of contact surfaces. Problems of mechanics of contact surfaces are related to accuracy of 3D surface roughness characteristic. One of the most important factors for 3D characteristics determination is the number of data points per x and y axes. With number of data points we understand its number in cut-off length. Number of data points have substantial influence on the accuracy of measurement results, measuring time and size of output data file （especially along the y-axis direction, where number of data points are number of parallel profiles）. Number of data points must be optimal. Small number of data points lead to incorrect results and increase distribution amplitude, but too large number of data points do not enlarge range of fundamental information, but substantially increase measuring time. Therefore, we must find optimal number of data points per each surface processing method.展开更多
The geographical and climatic patterning in craniofacial morphology among recent hominids has been regarded as relatively reliable evidence of environmental adaptation and natural selection,which is largely attributed...The geographical and climatic patterning in craniofacial morphology among recent hominids has been regarded as relatively reliable evidence of environmental adaptation and natural selection,which is largely attributed to thermoregulation.However,the relative influence of genetic and environmental factors on craniofacial features is unclear.Our study employed 3D laser scanning techniques to evaluate the association between geographical(latitude),climatic(annual temperature)factors,and 3D craniofacial measurements in 18 recent populations through bivariate correlation analysis.Significant correlations were found among braincase surface area,zygomatic bone surface area,cranial-facial index(facial surface area relative to braincase surface area)and local temperature,and a clear latitudinal gradient was also found in variation of braincase surface area.No significant correlations were found between zygomatic bone surface area,cranial-facial index and latitude.Our analysis supports the idea that the braincase functions as a radiator and is closely related to direct sunlight.We also suggest that absolute/relative craniofacial surface area varies consistently with predictions derived from Bergmann’s Rule.The mosaic craniofacial traits of American Indians may reflect retention of cold-derived,ancestral features,as well as a response to a slightly warmer climate.Because different craniofacial regions preserve environmental/genetic signatures differentially,caution is suggested when craniofacial anatomy is used for phylogenetic reconstruction and functional-morphological analysis.展开更多
We present a high-definition （HD） 3D laparoscopic system including a dual channel optical system, two cameras, a camera control unit （CCU）, and an HD 3D monitor. This laparoscopic system is capable of outputting d...We present a high-definition （HD） 3D laparoscopic system including a dual channel optical system, two cameras, a camera control unit （CCU）, and an HD 3D monitor. This laparoscopic system is capable of outputting dual high-definition videos and providing vivid 3D images. A modified pinhole camera model is used for camera calibration and a new method of depth measurement to improve precision. The average error of depth measurement measured by experiment （about 1.13 mm） was small in proportion to the large range in distance of the system （10-150 mm）. The new method is applicable to any calibrated binocular vision system.展开更多
文摘The technique of phase measuring profilometry using a single phase step method is proposed.This method can automatically obtain phase value at each pixel by using a discret cosine transform algorithm.The method is able to automatically recognize any position between depression and elevation on an object surface.Theoretical analysis and experimental verification are presented.
文摘An optical technique for 3 D shape measurement is presented. This technique, based on a deformed projected grating pattern which carries 3 D information of the measured object, can automatically and accurately obtain the phase map of a measured object by using one step phase shift algorithm.In comparison with traditional phase shift technique, the technique is much faster, with the equivalent accuracy. Only one frame image is sufficient for measuring. Experimental result of typical object is presented.
文摘Currently,with the fast development of GPS technique,GPS RTK is rapidly being applied to the cadastral survey. GPS RTK technique not only improves efficiency and accelerates the rate of mapping,but also increases economic efficiency. The authors introduced a method for GPS RTK rapid positioning,which uses continuous operational reference system (CORS) as a base station to change the method of previous map drawing by obtaining real-time three-dimensional coordinates of boundary points and statistically analyzing with the three-dimensional coordinates obtained by Total Station to get the accuracy of GPS RTK real-time coordinates. The application of GPS RTK in practical measurement was discussed when the data link had been lost especially. The results show that the three-dimensional coordinates measured by total station can be replaced by real-time three-dimensional coordinates measured by Engineering Star RTK in the CORS.
文摘The existing surface roughness standards comprise only two dimensions. However, the real roughness of the surface is 3D （three-dimensional）. Roughness parameters of the 3D surface are also important in analyzing the mechanics of contact surfaces. Problems of mechanics of contact surfaces are related to accuracy of 3D surface roughness characteristic. One of the most important factors for 3D characteristics determination is the number of data points per x and y axes. With number of data points we understand its number in cut-off length. Number of data points have substantial influence on the accuracy of measurement results, measuring time and size of output data file （especially along the y-axis direction, where number of data points are number of parallel profiles）. Number of data points must be optimal. Small number of data points lead to incorrect results and increase distribution amplitude, but too large number of data points do not enlarge range of fundamental information, but substantially increase measuring time. Therefore, we must find optimal number of data points per each surface processing method.
基金supported by the Chinese Academy of Sciences (Grant Nos. KZZD-EW-03, XDA05130100, GJHZ201314)the National Natural Science Foundation of China (Grant No. 41272034)
文摘The geographical and climatic patterning in craniofacial morphology among recent hominids has been regarded as relatively reliable evidence of environmental adaptation and natural selection,which is largely attributed to thermoregulation.However,the relative influence of genetic and environmental factors on craniofacial features is unclear.Our study employed 3D laser scanning techniques to evaluate the association between geographical(latitude),climatic(annual temperature)factors,and 3D craniofacial measurements in 18 recent populations through bivariate correlation analysis.Significant correlations were found among braincase surface area,zygomatic bone surface area,cranial-facial index(facial surface area relative to braincase surface area)and local temperature,and a clear latitudinal gradient was also found in variation of braincase surface area.No significant correlations were found between zygomatic bone surface area,cranial-facial index and latitude.Our analysis supports the idea that the braincase functions as a radiator and is closely related to direct sunlight.We also suggest that absolute/relative craniofacial surface area varies consistently with predictions derived from Bergmann’s Rule.The mosaic craniofacial traits of American Indians may reflect retention of cold-derived,ancestral features,as well as a response to a slightly warmer climate.Because different craniofacial regions preserve environmental/genetic signatures differentially,caution is suggested when craniofacial anatomy is used for phylogenetic reconstruction and functional-morphological analysis.
基金Project supported by the National Key Technology R&D Program of China(Nos.2011BAI12B06 and 2012BAI14B06)the Fundamental Research Funds for the Central Universities,China(No.2013FZA5018)
文摘We present a high-definition （HD） 3D laparoscopic system including a dual channel optical system, two cameras, a camera control unit （CCU）, and an HD 3D monitor. This laparoscopic system is capable of outputting dual high-definition videos and providing vivid 3D images. A modified pinhole camera model is used for camera calibration and a new method of depth measurement to improve precision. The average error of depth measurement measured by experiment （about 1.13 mm） was small in proportion to the large range in distance of the system （10-150 mm）. The new method is applicable to any calibrated binocular vision system.
