In order to study the effect of agitation on the characteristics of air dense medium fluidization, we designed and constructed an agitation device. Analyses were then conducted on the fluidization characteristics curv...In order to study the effect of agitation on the characteristics of air dense medium fluidization, we designed and constructed an agitation device. Analyses were then conducted on the fluidization characteristics curves, the bed density stability and the average bubble rise velocity Uaunder different agitation conditions. The results indicated that a lower bed pressure drop(without considering lower gas velocity in a fixed bed stage) and higher minimum fluidized velocity are achieved with increasing agitation speed.The height d(distance between the lower blades and air distribution plate) at which the agitation paddle was located had a considerable effect on the stability of the bed density at 9.36 cm/s < U < 10.70 cm/s. The higher the value of d, the better the stability, and the standard deviation of the bed density fluctuation r dropped to 0.0364 g/cm^3 at the ideal condition of d = 40 mm. The agitation speed also had a significant influence on the fluidization performance, and r was only 0.0286 g/cm^3 at an agitation speed of N = 75 r/min. The average bubble rise velocity decreased significantly with increasing agitation speed under the operating condition of 1.50 cm/s < U–U_(mf)< 3.50 cm/s. This shows that appropriate agitation contributes to a significant improvement in the fluidization quality in a fluidized bed, and enhances the separation performance of a fluidized bed.展开更多
A model is presented for predicting the fluid velocity distribution around a rising bubble which startsfrom rest on a distillation column tray by considering the unsteady fluid flow based on the method of streamfuncti...A model is presented for predicting the fluid velocity distribution around a rising bubble which startsfrom rest on a distillation column tray by considering the unsteady fluid flow based on the method of streamfunction. Experimental measurement of the velocity distribution by using whole field digitized PIV (particle imagevelocimetry) method is briefly described. The velocity distribution predicted by the present model is in betteragreement with the measurements than the others models published in literature.展开更多
基金financial support by the National Key Programs for Fundamental Research and Development of China(No.2012CB214904)the National Natural Science Foundation of China(Nos.51174203,51134022)
文摘In order to study the effect of agitation on the characteristics of air dense medium fluidization, we designed and constructed an agitation device. Analyses were then conducted on the fluidization characteristics curves, the bed density stability and the average bubble rise velocity Uaunder different agitation conditions. The results indicated that a lower bed pressure drop(without considering lower gas velocity in a fixed bed stage) and higher minimum fluidized velocity are achieved with increasing agitation speed.The height d(distance between the lower blades and air distribution plate) at which the agitation paddle was located had a considerable effect on the stability of the bed density at 9.36 cm/s < U < 10.70 cm/s. The higher the value of d, the better the stability, and the standard deviation of the bed density fluctuation r dropped to 0.0364 g/cm^3 at the ideal condition of d = 40 mm. The agitation speed also had a significant influence on the fluidization performance, and r was only 0.0286 g/cm^3 at an agitation speed of N = 75 r/min. The average bubble rise velocity decreased significantly with increasing agitation speed under the operating condition of 1.50 cm/s < U–U_(mf)< 3.50 cm/s. This shows that appropriate agitation contributes to a significant improvement in the fluidization quality in a fluidized bed, and enhances the separation performance of a fluidized bed.
文摘A model is presented for predicting the fluid velocity distribution around a rising bubble which startsfrom rest on a distillation column tray by considering the unsteady fluid flow based on the method of streamfunction. Experimental measurement of the velocity distribution by using whole field digitized PIV (particle imagevelocimetry) method is briefly described. The velocity distribution predicted by the present model is in betteragreement with the measurements than the others models published in literature.
