A phase-matched filtering technique is applied to extract fundamental mode signals from Rayleigh waves recorded at 62 digital seismic stations in the Yunnan and Sichuan regions.We use the fundamental mode of vibration...A phase-matched filtering technique is applied to extract fundamental mode signals from Rayleigh waves recorded at 62 digital seismic stations in the Yunnan and Sichuan regions.We use the fundamental mode of vibrations at two stations that are located on the same great circle as the focus to calculate an inter-station attenuation coefficient of the Rayleigh wave with periods between 0.40 and 80.64 s,and invert for the inter-station S-wave Q-factor (Qβ) at depths of 0-200 km.The results indicate that Qβ in Yunnan is 20-140,presenting a low Qβ background with apparent lateral variation.Taking the Honghe Fault as the boundary,Qβ of the crust is only 20 on the west side,extending to a depth of 120 km.The distribution of Qβ is consistent with large-scale Cenozoic volcanic and intrusive rocks in western Yunnan,implying that the crust and mantle are in the thermally active state.In the eastern Yunnan Block,east of the Xiaojiang Fault,Qβ in the upper 120 km is 140 in the south but only 20 in the north.Additionally,around the Dukou-Chuxiong in the mid-Yunnan Block,Qβ in the lithosphere is relatively high at 60-100,corresponding to a stiff crust.This is because the suture between the Indian and Eurasian plates reversed the tension in the rifting stage into the compression of orogenesis,leading to the closure of a gap in the crust.After some time,interstitial fluids gradually disappeared,resulting in a high velocity layer in the crust and low heat flow on the surface.The Yunnan region consists of an obvious block of elevated Qβ,distributed within the low background,consistent with the distribution of heat-flow values on the surface.The Honghe and Xiaojiang faults are tectonic boundaries in addition to being boundaries between regions of high and low crustal Qβ.The low Qβ is probably the result of crustal rupture and disturbance caused by strong earthquakes and the upwelling of hot substances along the deep fault zones.展开更多
The western Sichuan hydrothermal area is located at the northeastern margin of the eastern syntaxis of the Qinghai-Tibet Plateau, which is also the eastern end of the Mediterranean-Himalayan geothermal activity zone. ...The western Sichuan hydrothermal area is located at the northeastern margin of the eastern syntaxis of the Qinghai-Tibet Plateau, which is also the eastern end of the Mediterranean-Himalayan geothermal activity zone. There are 248 warm or hot springs in this area, and 11 have temperatures beyond the local boiling temperature. Most of these hot springs are distributed along the Jinshajiang, Dege-Xiangcheng, Ganzi-Litang, and Xianshuihe faults, forming a NW-SE hydrothermal belt. A geothermal analysis of this high-temperature hydrothermal area is an important basis for understanding the deep geodynamic process of the eastern syntaxis of the Qinghai-Tibet Plateau. In addition, this study offers an a priori view to utilize geothermal resources, which is important in both scientific research and application. We use gravity, magnetic, seismic, and helium isotope data to analyze the crust-mantle heat flow ratio and deep geothermal structure. The results show that the background terrestrial heat flow descends from southwest to northeast. The crustal heat ratio is not more than 60%. The high temperature hydrothermal active is related to crustal dynamics processes. Along the Batang-Litang-Kangding line, the Moho depth increases eastward, which is consistent with the changing Qc/Qm(crustal/mantle heat flow) ratio trend. The geoid in the hydrothermal zone is 4–6 km higher than the surroundings, forming a local "platform". The NW-SE striking local tensile stress zone and uplift structure in the upper and middle crust corresponds with the surface hydrothermal active zone. There is an average Curie Point Depth(CPD) of 19.5–22.5 km in Batang, Litang, and Kangding. The local shear-wave(S-wave) velocity is relatively low in the middle and lower crust. The S-wave shows a low velocity trap(Vs<3.2 km s.1) at 15–30 km, which is considered a high-temperature partial melting magma, the crustal source of the hydrothermal active zone. We conclude that the hydrothermal system in this area can be divided into Batang-type and Kangding-type, both of which rely on a crustal heating cycle of atmospheric precipitation and surface water along the fracture zone. The heat is derived from the middle and lower crust: groundwater penetrates the deep faults bringing geothermal energy back to the surface and forming high-temperature springs.展开更多
基金Joint Seismological Science Foundation of China (101086) and the key project Digital Crustal and Mantle Structure of Chinese Mainland from China Earthquake Administration.
基金supported by National Natural Science Fundation of China (Grant No. U0933602)Professional Projects of the Chinese Seismological Bureau (Grant No. 200808061)
文摘A phase-matched filtering technique is applied to extract fundamental mode signals from Rayleigh waves recorded at 62 digital seismic stations in the Yunnan and Sichuan regions.We use the fundamental mode of vibrations at two stations that are located on the same great circle as the focus to calculate an inter-station attenuation coefficient of the Rayleigh wave with periods between 0.40 and 80.64 s,and invert for the inter-station S-wave Q-factor (Qβ) at depths of 0-200 km.The results indicate that Qβ in Yunnan is 20-140,presenting a low Qβ background with apparent lateral variation.Taking the Honghe Fault as the boundary,Qβ of the crust is only 20 on the west side,extending to a depth of 120 km.The distribution of Qβ is consistent with large-scale Cenozoic volcanic and intrusive rocks in western Yunnan,implying that the crust and mantle are in the thermally active state.In the eastern Yunnan Block,east of the Xiaojiang Fault,Qβ in the upper 120 km is 140 in the south but only 20 in the north.Additionally,around the Dukou-Chuxiong in the mid-Yunnan Block,Qβ in the lithosphere is relatively high at 60-100,corresponding to a stiff crust.This is because the suture between the Indian and Eurasian plates reversed the tension in the rifting stage into the compression of orogenesis,leading to the closure of a gap in the crust.After some time,interstitial fluids gradually disappeared,resulting in a high velocity layer in the crust and low heat flow on the surface.The Yunnan region consists of an obvious block of elevated Qβ,distributed within the low background,consistent with the distribution of heat-flow values on the surface.The Honghe and Xiaojiang faults are tectonic boundaries in addition to being boundaries between regions of high and low crustal Qβ.The low Qβ is probably the result of crustal rupture and disturbance caused by strong earthquakes and the upwelling of hot substances along the deep fault zones.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41574074, 41174085, 41430319)the Innovation Team Project of Chinese Academy of Sciences (Grant No. KZZD-EW-TZ-19)the Strategic Pilot Technology of Chinese Academy of Sciences (Grant No. XDA1103010102)
文摘The western Sichuan hydrothermal area is located at the northeastern margin of the eastern syntaxis of the Qinghai-Tibet Plateau, which is also the eastern end of the Mediterranean-Himalayan geothermal activity zone. There are 248 warm or hot springs in this area, and 11 have temperatures beyond the local boiling temperature. Most of these hot springs are distributed along the Jinshajiang, Dege-Xiangcheng, Ganzi-Litang, and Xianshuihe faults, forming a NW-SE hydrothermal belt. A geothermal analysis of this high-temperature hydrothermal area is an important basis for understanding the deep geodynamic process of the eastern syntaxis of the Qinghai-Tibet Plateau. In addition, this study offers an a priori view to utilize geothermal resources, which is important in both scientific research and application. We use gravity, magnetic, seismic, and helium isotope data to analyze the crust-mantle heat flow ratio and deep geothermal structure. The results show that the background terrestrial heat flow descends from southwest to northeast. The crustal heat ratio is not more than 60%. The high temperature hydrothermal active is related to crustal dynamics processes. Along the Batang-Litang-Kangding line, the Moho depth increases eastward, which is consistent with the changing Qc/Qm(crustal/mantle heat flow) ratio trend. The geoid in the hydrothermal zone is 4–6 km higher than the surroundings, forming a local "platform". The NW-SE striking local tensile stress zone and uplift structure in the upper and middle crust corresponds with the surface hydrothermal active zone. There is an average Curie Point Depth(CPD) of 19.5–22.5 km in Batang, Litang, and Kangding. The local shear-wave(S-wave) velocity is relatively low in the middle and lower crust. The S-wave shows a low velocity trap(Vs<3.2 km s.1) at 15–30 km, which is considered a high-temperature partial melting magma, the crustal source of the hydrothermal active zone. We conclude that the hydrothermal system in this area can be divided into Batang-type and Kangding-type, both of which rely on a crustal heating cycle of atmospheric precipitation and surface water along the fracture zone. The heat is derived from the middle and lower crust: groundwater penetrates the deep faults bringing geothermal energy back to the surface and forming high-temperature springs.
