The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the en...The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process, but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees, the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change, and the slope of the temperature time history curve remains the same. However, the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size, boundary conditions, and the power source＇s cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38ram needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.展开更多
The geophysical mechanism behind astronomical time-latitude residuals （ATLR） are discussed. The photoelectric astrolabe at Yunnan Observatory （YO） observed apparent synchronous anomalous ATLR before the Wenchuan M...The geophysical mechanism behind astronomical time-latitude residuals （ATLR） are discussed. The photoelectric astrolabe at Yunnan Observatory （YO） observed apparent synchronous anomalous ATLR before the Wenchuan M8.0 earthquake （EQ） in May 12, 2008 and the Lushan M7.0 EQ n April 20, 2013. We compared the ATLR from the YO photoelectric astrolabe and EQ data since 1976. Anomalous ATLR was observed before several strong EQs in the Yunnan Province. We believe the photoelectric astrolabe can be used to predict strong EQs and the anomalous ATLR are a potential EQ precursor.展开更多
Based on the analysis of a specific relay model and an HVAC （high voltage alternating current） cable system, a detailed approach to EMTDC/PSCAD modelling of protective relays is presented. Such approach allows to cr...Based on the analysis of a specific relay model and an HVAC （high voltage alternating current） cable system, a detailed approach to EMTDC/PSCAD modelling of protective relays is presented. Such approach allows to create complex and accurate relay models derived from the original algorithms. Relay models can be applied with various systems, allowing to obtain the most optimal configuration of the protective relaying. The present paper describes modelling methodology on the basis of Siemens SIPROTEC 4 7SD522/610. Relay model was verified experimentally with its real equivalent by both EMTP-simulated and real world generated current signals connected to the relay.展开更多
In this study we characterized and investigated the specific phenomenon of "companion drops" in the drop-ondemand(DOD) ink jetting process.A series of simulations based on a piezoelectric DOD printhead syste...In this study we characterized and investigated the specific phenomenon of "companion drops" in the drop-ondemand(DOD) ink jetting process.A series of simulations based on a piezoelectric DOD printhead system is presented,adapting the volume-of-fluid(VOF) interface-capturing method to track the boundary evolution and model the interfacial physics.The results illustrate the causality between the generation of companion drops and droplet deviation behavior,as well as their close correlations with ink jetting straightness and printing accuracy.The characteristics of companion drops are summarized and compared with those of satellite drops.Also,a theoretical mechanism for the generation of companion drops is presented,and their effects and behaviors are analyzed and discussed.Finally,the effects of critical factors on the generation of companion drops are investigated and characterized based on variations in the printable pressure range.Recommendations are given for the suppression of companion drops and for the improvement of printing accuracy.展开更多
基金Supported by the Sustainable Energy Propulsion System Program of 211’s Engineering Foundation, Shanghai Jiaotong University.
文摘The phase change characteristic of the power source of an underwater glider propelled by the ocean＇s thermal energy is the key factor in glider attitude control. A numerical model has been established based on the enthalpy method to analyze the phase change heat transfer process under convective boundary conditions. Phase change is not an isothermal process, but one that occurs at a range of temperature. The total melting time of the material is very sensitive to the surrounding temperature. When the temperature of the surroundings decreases 8 degrees, the total melting time increases 1.8 times. But variations in surrounding temperature have little effect on the initial temperature of phase change, and the slope of the temperature time history curve remains the same. However, the temperature at which phase change is completed decreases significantly. Our research shows that the phase change process is also affected by container size, boundary conditions, and the power source＇s cross sectional area. Materials stored in 3 cylindrical containers with a diameter of 38ram needed the shortest phase change time. Our conclusions should be helpful in effective design of underwater glider power systems.
基金supported by the Ministry of Science and Technology of P.R.China(No.2012BAK19B01-07)
文摘The geophysical mechanism behind astronomical time-latitude residuals （ATLR） are discussed. The photoelectric astrolabe at Yunnan Observatory （YO） observed apparent synchronous anomalous ATLR before the Wenchuan M8.0 earthquake （EQ） in May 12, 2008 and the Lushan M7.0 EQ n April 20, 2013. We compared the ATLR from the YO photoelectric astrolabe and EQ data since 1976. Anomalous ATLR was observed before several strong EQs in the Yunnan Province. We believe the photoelectric astrolabe can be used to predict strong EQs and the anomalous ATLR are a potential EQ precursor.
文摘Based on the analysis of a specific relay model and an HVAC （high voltage alternating current） cable system, a detailed approach to EMTDC/PSCAD modelling of protective relays is presented. Such approach allows to create complex and accurate relay models derived from the original algorithms. Relay models can be applied with various systems, allowing to obtain the most optimal configuration of the protective relaying. The present paper describes modelling methodology on the basis of Siemens SIPROTEC 4 7SD522/610. Relay model was verified experimentally with its real equivalent by both EMTP-simulated and real world generated current signals connected to the relay.
基金Project supported by the National Key Technology R&D Program(No. 2011BAD01B03)the Key Project of Science and Technology Program of Zhejiang Province (No. 2009C11099)the Zhejiang Provincial Natural Science Foundation (No. Y1110230)
文摘In this study we characterized and investigated the specific phenomenon of "companion drops" in the drop-ondemand(DOD) ink jetting process.A series of simulations based on a piezoelectric DOD printhead system is presented,adapting the volume-of-fluid(VOF) interface-capturing method to track the boundary evolution and model the interfacial physics.The results illustrate the causality between the generation of companion drops and droplet deviation behavior,as well as their close correlations with ink jetting straightness and printing accuracy.The characteristics of companion drops are summarized and compared with those of satellite drops.Also,a theoretical mechanism for the generation of companion drops is presented,and their effects and behaviors are analyzed and discussed.Finally,the effects of critical factors on the generation of companion drops are investigated and characterized based on variations in the printable pressure range.Recommendations are given for the suppression of companion drops and for the improvement of printing accuracy.
