不纯正不作为犯作为义务来源研究

作为义务是不作为领域中的核心要素,反映了不作为犯罪的基本犯罪事实和构成要素,是决定不作为犯罪能否成立,以及属于何种性质犯罪的主要依据.作为义务的来源或称作为义务的根据,是指作为义务的产生条件,也即行为人在什么情况下具有防止结果或犯罪事实发生的义务.在刑法理论上,不作为犯分为纯正不作为犯和不纯正不作为犯.

Characterization of a Powertrain Test Bed in the Context of Virtual Validation of Drivability

Technological trends in the automotive industry toward a software-defined and autonomous vehicle require a reassessment of today’s vehicle development process.The validation process soaringly shapes after starting with hardware-in-the-loop testing of control units and reproducing real-world maneuvers and physical interaction chains.Here,the road-to-rig approach offers a vast potential to reduce validation time and costs significantly.The present research study investigates the maneuver reproduction of drivability phenomena at a powertrain test bed.Although drivability phenomena occur in the frequency range of most up to 30∙Hz,the design and characteristics substantially impact the test setup’s validity.By utilization of modal analysis,the influence of the test bed on the mechanical characteristic is shown.Furthermore,the sensitivity of the natural modes of each component,from either specimen or test bed site,is determined.In contrast,the uncertainty of the deployed measurement equipment also affects the validity.Instead of an accuracy class indication,we apply the ISO/IEC Guide 98 to the measurement equipment and the test bed setup to increase the fidelity of the validation task.In conclusion,the present paper contributes to a traceable validity determination of the road-to-rig approach by providing objective metrics and methods.

Study on the new materials for fiberboard refiner plate of defibrator

Defibrator is a very important machine in the wood industry for producing fiberboard. The refiner plates are the key parts of defibrator that directly act with the wood, and broken easily. The working life of the refiner plates is of significance to the wood industry. It may affect refining quality, production efficiency, and power consumption. In this paper, the abrasion resistance of the refiner plate made of different materials, the stainless steels and high chromium cast irons, were tested and compared. The results showed that abrasion resistance of refiner plate made of high chromium cast irons was better than that of the stainless steel materials. Although the two kinds of materials have the same compositions, their abrasion resistances have ap-parent difference. The main reason is that the material microstructures have very important effects on their performance. The refiner plates made of developed high chromium cast irons don抰 demand the complex heat treatment. This can simplify the producing process, save the cost of production, decrease labor strength, and increase the production efficiency.

Preliminary Studies on the Effect of Photoperiod and Temperature on Male Fertility of a Cytoplasmic Male Sterile Line in Wheat

[Objective] The study aimed to reveal the effect of photoperiod and temperature on male fertility of cytoplasmic male sterile line Vtai911289a in wheat and discuss the mechanism of male fertility alteration. [ Method ] The sowing-date tests and designed conditions were conducted during 2003 -2005. [ Result] Fertility of Vtai911289a, could alter under specific photoperiod and temperature conditions. Temperature is one of the main factors influencing male fertility of the male sterile lines. Vtai911289a, showed stable sterility under the condition of the mean of daily temperature at fertility sensitive stage lower than 19℃ and presented partial fertility when the mean of daily temperature at fertility sensitive stage lower than 20 - 22℃. Photoperiod to some extent affects the male fertility of Vtai911289a, long-day condition is helpful for the male fertility of the sterile line. [ Conclusion] The application of photoperiod temperature-sensitive cytoplasmic male sterile line in production has a higher safety than that of temperature sensitive sterile line.

Integrated logistics facilities network design for 3PLS under uncertainty

According to the operational characteristics of the logistics networks for the third party logistics supplier （3PLS）, the forward and reverse logistics networks together for 3PLS under the uncertain environment are designed. First, a fuzzy model is proposed by taking multiple customers, multiple commodities, capacitated facility location and integrated logistics facility layout into account. In the model, the fuzzy customer demands and transportation rates are illustrated by triangular fuzzy numbers. Secondly, the fuzzy model is converted into a crisp model by applying fuzzy chance constrained theory and possibility theory, and one hybrid genetic algorithm is designed for the crisp model. Finally, two different examples are designed to illustrate that the model and solution discussed are valid.

Performance of bottleneck shifting for remanufacturing system considering returns' quality grading

Aimed at the remanufacturing system, the effect of the uncertainty of returns＇ quality on bottleneck shifting is investigated. A novel definition of bottleneck station is presented and the probability of a station becoming a bottleneck is also given. By calculating the effective output, the effective operation time （EOT） and the ratio of EOT of each station, the system＇s current bottleneck of effective output time is determined. By calculating the probability coefficient of variation and index of bottleneck shifting, the quantitative performance of bottleneck shifting is obtained. Discrete event simulation and the experiment design method are adopted to simulate the system, in which the proportion of quality grading, repair rates and process routes are considered. The case study shows that the uncertainty of returns＇ quality greatly increases the probability of bottleneck shifting, and with the increase of the discrete degree of the returns＇ repair rate, the bottleneck shifting phenomenon is more obvious. Furthermore, bottleneck shifting is closely related to the process route of the dominating returns＇ quality grade.

Development of transition condition for region with variable-thickness in isothermal local loading process

Using simple unequal-thickness billet combining isothermal local loading can control the metal flow and improve the cavity fill in manufacturing process of large-scale rib-web titanium alloy component with low cost and short cycle. The beveling transition pattern is well used for variable-thickness region of billet （VTRB） due to its simple and ample range of transition condition. The transition condition development in the local loading process has a significant influence on dynamic boundary of unrestricted portion of VTRB. With the help of reasonable assumptions, a mathematical model of transition condition development was established by theoretical analysis. The predicted results for local loading process of rib-web component using the established model were compared with the numerical and experimental ones, and the results indicated that the model of transition condition development is reasonable. Using the established model could deal with the dynamic boundary of unrestricted portion of VTRB well, and the model is suitable for the analysis of metal flow and cavity fill in local loading process of multi-ribs component.

Synthesis and Surface Activity of Heterogemini Imidazolium Surfactants

A series of heterogemini imidazolium surfactants with two-methylene spacer groups （[Cm- 2-Cnim]Br2, m, n=8, 10, 12, 14, 16; m≠n） have been synthesized and characterized by 1H NMR and ESI-MS spectroscopy. The effects of various reaction parameters, including stoichiometry, reaction temperature and time, were investigated. In addition, the surface activity study about heterogemini imidazolium surfactants was carried out and the influences of dissymmetric degree on the surface properties were also discussed.

An Invariant of the Projective Semi-symmetric Connection

In this paper the projective semi symmetric connection D is studied, which is projectively equivalent to the Levi_Civita connection . An intrinsic projective invariant is found out and a necessary and sufficient condition is given. Furthermore, another condition is obtained when the convariant derivative of the projective invariant is kept.

Comparative study: Vonoprazan and proton pump inhibitors in Helicobacter pylori eradication therapy

AIMTo compare the effectiveness and safety of vonoprazan-based therapy with proton pump inhibitor (PPI)-based therapies to treat Helicobacter pylori (H. pylori).METHODSWe retrospectively analysed data from first-line (vonoprazan or PPI with 200 mg clarithromycin and 750 mg amoxicillin twice daily for 7 d) (n = 1353) and second-line (vonoprazan or PPI with 250 mg metronidazole and 750 mg amoxicillin twice daily for 7 d) (n = 261) eradication treatments for H. pylori -positive patients with associated gastrointestinal diseases from April 2014 to December 2015 at Hattori Clinic, Japan. The primary endpoint was the eradication rate, which was assessed with a full analysis set. The secondary endpoints were adverse events and related factors.RESULTSAfter the first-line treatments, the eradication rates for vonoprazan, esomeprazol, rabeprazole, and lansoprazole were 87.9% (95%CI: 84.9%-90.5%), 71.6% (95%CI: 67.5%-75.5%), 62.9% (95%CI: 52.0%-72.9%), and 57.3% (95%CI: 50.4%-64.1%), respectively. The vonoprazan eradication rate was significantly higher than that of the PPIs (P < 0.01). Interestingly, smoking did not affect the H. pylori eradication rate in the vonoprazan group (P = 0.34), whereas it decreased the rates in the PPI groups (P = 0.013). The incidence of adverse events in the vonoprazan group was not different from the PPI group (P = 0.054), although the vonoprazan group exhibited a wider range of adverse events. Vonoprazan-based triple therapy was highly effective as a second-line treatment, with an eradication rate similar to that of PPI-based therapy.CONCLUSIONVonoprazan might be superior to PPIs in first-line H. pylori therapy, particularly for smokers. However, caution is required due to possible adverse events.

The Integrable Conditions of Riccati Differential Equation

In this paper,the new integrable conditions of Riccati equation is presented by invarant of Riccati equation.

Improved absorbing boundary condition based on linear interpolation for ADI-FDTD method

With the linear interpolation method, an improved absorbing boundary condition（ABC）is introduced and derived, which is suitable for the alternating-direction-implicit finite- difference time-domain （ADI-FDTD） method. The reflection of the ABC caused by both the truncated error and the phase velocity error is analyzed. Based on the phase velocity estimation and the nonuniform cell, two methods are studied and then adopted to improve the performance of the ABC. A calculation case of a rectangular waveguide which is a typical dispersive transmission line is carried out using the ADI-FDTD method with the improved ABC for evaluation. According to the calculated case, the comparison is given between the reflection coefficients of the ABC with and without the velocity estimation and also the comparison between the reflection coefficients of the ABC with and without the nonuniform processing. The reflection variation of the ABC under different time steps is also analyzed and the acceptable worsening will not obscure the improvement on the absorption. Numerical results obviously show that efficient improvement on the absorbing performance of the ABC is achieved based on these methods for the ADI-FDTD.

A Strategy for the Integration of Production Planning and Scheduling in Refineries under Uncertainty

A strategy for the integration of production planning and scheduling in refineries is proposed. This strategy relies on rolling horizon strategy and a two-level decomposition strategy. This strategy involves an upper level multiperiod mixed integer linear programming （MILP） model and a lower level simulation system, which is extended from our previous framework for short-term scheduling problems [Luo, C.E, Rong, G, ＂Hierarchical apthis extended framework is to reduce the number of variables and the size of the optimization model and, to quickly find the optimal solution for the integrated planning/scheduling problem in refineries. Uncertainties are also considered in this article. An integrated robust optimization approach is introduced to cope with uncertain parameters with both continuous and discrete probability distribution.

Parametric Study of Two-Body Floating-Point Wave Absorber

In this paper, we present a comprehensive numerical simulation of a point wave absorber in deep water. Analyses are performed in both the frequency and time domains. The converter is a two-body floating-point absorber （FPA） with one degree of freedom in the heave direction. Its two parts are connected by a linear mass-spring-damper system. The commercial ANSYS-AQWA software used in this study performs well in considering validations. The velocity potential is obtained by assuming incompressible and irrotational flow. As such, we investigated the effects of wave characteristics on energy conversion and device efficiency, including wave height and wave period, as well as the device diameter, draft, geometry, and damping coefficient. To validate the model, we compared our numerical results with those from similar experiments. Our study results can clearly help to maximize the converter＇s efficiency when considering specific conditions.

Microstructure and mechanical characterization of Incoloy 825 Ni-based alloy welded to 2507 super duplex stainless steel through dissimilar friction stir welding

The feasibility of dissimilar friction stir welding(FSW)between the SAF 2507 super duplex stainless steel and the Incoloy825 Ni-based superalloy was evaluated.The microstructure and mechanical behavior of the weldments were examined too.The results showed that the alloys were successfully welded together by positioning the SAF 2507 on the advancing side.The nuggets displayed higher hardness than the base metals,due to the occurrence of dynamic recrystallization and the subsequent refinement of the microstructures.The welded sample obtained the similar strength to the Incoloy 825 parent metal,showing the ductile fracture mode after the tensile tests by SEM.Moreover,the weld zone(31 J)exhibited higher and lower toughness than the Incoloy 825(23 J)and SAF 2507(42 J)parent metals,respectively.Based on the obtained results,the FSW method could be recommended to weld the super duplex stainless steel/Ni-based superalloy joints.

Approximate Generalized Conditional Symmetries for Perturbed Evolution Equations

The concept of approximate generalized conditional symmetry （AGCS） for the perturbed evolution equations is introduced, and how to derive approximate conditional invariant solutions to the perturbed equations via their A GCSs is illustrated with examples.

Hepatoxicity associated with weight-loss supplements: A case for better post-marketing surveillance

There is a growing number of case reports of hepatoxicity from the widely marketed weight-loss supplement Hydroxycut, which contains the botanical ingredient Garcinia cambogia . These case reports may substantially undercount the true magnitude of harm. Based on the past experience with harmful dietary supplements, US regulators should assume the more precautionary approach favored by Canada and Europe. Lacking effective adverse event surveillance for supplements, or the requirements to prove safety prior to coming to the market, case reports such as those summarized here assume added importance.

Effects of adjuvant Chinese patent medicine therapy on major adverse cardiovascular events in patients with coronary heart disease angina pectoris:a population-based retrospective cohort study

Objective: This study aimed to explore the effects of Chinese patent medicine(CPM) in reducing the incidence of major adverse cardiovascular events(MACE) in patients with coronary heart disease(CHD) angina pectoris and improving clinical effectiveness and provide evidence for its use as clinical adjuvant therapy.Methods: Twenty-eight thousand five hundred and seventeen patients hospitalized with CHD angina pectoris from 6 hospitals were divided into CPM group(n = 11,374) and non-CPM group(n = 17,143) to evaluate the incidence of MACE, including myocardial infarction, percutaneous coronary intervention, and coronary artery bypass grafting.Results: The incidence of MACE in the CPM group was lower than that in the non-CPM group. CPM therapy was an independent protective factor that reduced the overall risk of MACE [adjusted hazard ratio = 0.40, 95% confidence interval(0.33;0.49)]. Patients in the CPM group who received one, two, or three types of CPM could benefit from adjuvant treatment with CPM, and taking more types of CPM was associated with a lower risk of MACE. In addition, the male population was better than the female population at taking CPM, and middle-aged people aged 55 to 64 were more suited to take CPM based on Western medicine.Conclusions: The use of CPM as adjuvant therapy can decrease the occurrence of MACE in patients with CHD angina pectoris,especially in men and middle-aged people, and the drug treatment plan should be optimized accordingly. However, this conclusion needs further verification by prospective cohort studies in the future.

Conformal Invariance and Noether Symmetry, Lie Symmetry of Birkhoffian Systems in Event Space

This paper focuses on studying a conformal invariance and a Noether symmetry, a Lie symmetry for a Birkhoffian system in event space. The definitions of the conformal invariance of the system are given. By investigation on the relations between the conformal invariance and the Noether symmetry, the conformal invariance and the Lie symmetry, the expressions of conformal factors of the system under these circumstances are obtained. The Noether conserved quantities and the Hojman conserved quantities directly derived from the conformal invariance are given. Two examples are given to illustrate the application of the results.

Classification and Approximate Solutions to Perturbed Nonlinear Diffusion-Convection Equations

This paper studies the perturbed nonlinear diffusion-convection equation with source term via the approximate generalized conditional symmetry （A GCS）. Complete classification of those perturbed equations which admit certain types of AGCSs is derived. Some approximate invariant solutions to the resulting equations can also be obtained.