磷钼蓝比色法测定洗衣粉中五氧化二磷含量的不确度评定

本文对洗衣粉中五氧化二磷含量的不确定度进行评定。通过研究分析磷钼蓝比色法测定洗衣粉中五氧化二磷含量检测过程中不确定度的主要来源,并进行量化和合成。结果表明:洗衣粉中五氧化二磷含量测定的不确定度最主要来源是拟合标准曲线过程引入的不确定度。

出租汽车计价器使用误差检定的测量不确定度分析

本文介绍了用以全球定位系统GPS为主要工作模块的CBJ-A多功能出租汽车计价器检定仪检定出租汽车计价器使用误差的测量不确定度分析方法,为出租汽车计价器使用误差的检定提供可靠的依据。

陶瓷砖放射性核素的测量不确定度评定

本文依据标准对陶瓷砖的放射性核素进行测量,较详细地分析全自动低本底多道γ能谱仪和测量过程中带来不确定因素,根据这些因素计算实现对陶瓷砖放射性核素的测量不确度评定。

电话计时计费装置测量结果不确定度评定

采用比较测量法检定电话计时计费装置计时误差,可以减小计时计费装置分辨力误差引入不确定度,大大减小测量结果不确定度。当电话计时计费装置计时到整数时间时,触发电话计时计费检定仪,停止电话计时计费装置计时,读取电话计时计费检定仪标准值和电话计时计费装置的测量值,得出被检电话计时计费装置计时测量误差,评定测量结果不确定度,为电话计时计费装置的计时基本误差的检定提供依据。

Uncertainty Evaluation of Preparation of Organophosphorus Pesticide Mixed Standard Solution

The uncertainty of standard solution plays an important role in detection of pesticide residues. It may affect the accuracy of detection results. In this study, the 14 organophosphorus pesticides mixed standard solution was used as the material to analyze all the influencing factors for the preparation of mixed standard solution with uncertainty as the only judging index. The preparation uncertainty of mixed standard solution was calculated with the top-down calculation method. In the end, the expanded uncertainty was presented. The results showed that the preparation of mixed standard solution from stock solution with precise pipettes had a relatively low uncertainty.

Performance Calibration of Articulated Arm Coordinate Measuring Machine

This paper presents the method for the performance calibration of AACMM （articulated arm coordinate measuring machines） according to ASME B89.4.22 Standard. The growing use of this class of measurement equipment has been accompanied by an absence of authorized laboratories to provide calibration certificates for its performance. Due to ASME B89.4.22 and VD12617-9 are nowadays the unique standards in the field of AACMM verification, IK4 Tekniker has compared both of them in order to develop internal test procedures to yield reliable performance calibration results. As a result, IK4 Tekniker has been recognized by the Spanish Accreditation Body （ENAC） in the field of AACMM calibration. Internal test procedures and uncertainty evaluation analysis have been developed as well as ENAC certificated reference test equipments have been acquired to ensure a suitable AACMM calibration process.

Uncertainty Assessment of Soil Erosion Model Using Particle Filtering

Recent advances in computer with geographic information system(GIS) technologies have allowed modelers to develop physics-based models for modeling soil erosion processes in time and space.However, it has been widely recognized that the effect of uncertainties on model predictions may be more significant when modelers apply such models for their own modeling purposes.Sources of uncertainty involved in modeling include data, model structural, and parameter uncertainty.To deal with the uncertain parameters of a catchment-scale soil erosion model(CSEM) and assess simulation uncertainties in soil erosion, particle filtering modeling(PF) is introduced in the CSEM.The proposed method, CSEM-PF, estimates parameters of non-linear and non-Gaussian systems, such as a physics-based soil erosion model by assimilating observation data such as discharge and sediment discharge sequences at outlets.PF provides timevarying feasible parameter sets as well as uncertainty bounds of outputs while traditional automatic calibration techniques result in a time-invariant global optimal parameter set.CSEM-PF was applied to a small mountainous catchment of the Yongdamdam in Korea for soil erosion modeling and uncertainty assessment for three historical typhoon events.Finally, the most optimal parameter sets and uncertainty bounds of simulation of both discharge and sediment discharge at each time step of the study events are provided.

Vulnerability to Flood in the Vietnamese Mekong Delta： Mapping and Uncertainty Assessment

The Vietnamese Mekong Delta is located at the end of the Mekong River, one of the 10 largest rivers in the world. It plays an important role, especially in terms of food security for not only Vietnam but also the world. However, the Vietnamese Mekong Delta is projected to be heavily affected by： （1） the annual （fluvial） flood, which would be changed in terms of time and spatial distribution after impacts of climate change scenarios （i.e., sharper hydrograph with shorter flood period）; and （2） sea level rise. Such combination would result in significant changes of surface water resources, leading to consequent impacts on the existing fanning systems in the Vietnamese Mekong Delta. Therefore, this paper presents a new approach of integrating a one-dimensional hydrodynamic model （ISIS-1 D） with GIS （Geographic Information System ） analyses to： （1） identify priority areas for flood adaptation and mitigation; （2） provide an insight to local decision-makers in the Vietnamese Mekong Delta in changes of future floods.

Fire risk evaluation research on fully mechanized coalface based on the uncertainty measure theory

A relatively perfect coalmine fire risk-evaluating and order-arranging model that includes sixteen influential factors was established according to the statistical information of the fully mechanized coalface ground on the uncertainty measure theory. Then the single-index measure function of sixteen influential factors and the calculation method of computing the index weight ground on entropy theory were respectively established. The value assignment of sixteen influential factors was carried out by the qualitative analysis and observational data, respectively, in succession. The sequence of fire danger class of four experimental coalfaces could be obtained by the computational aids of Matlab according to the confidence level criterion. Some conclusions that the fire danger class of the No.l, No.2 and No.3 coalface belongs to high criticality can be obtained. But the fire danger class of the No.4 coalface belongs to higher criticality. The fire danger class of the No.4 coalface is more than that of the No.2 coalface. The fire danger class of the No.2 coalface is more than that of the No.1 coalface. Finally, the fire danger class of the No.1 coalface is more than that of the No.3 coalface.

Uncertainty Calculation of Roundness Assessment by Automatic Differentiation in Coordinate Metrology

Reomtly, Coordinate bieasuring Machines （CMMs） are widely used to measure roundness errors. Roundness is calculated from a large number of points collected from the profiles of the parts. According to the Guide to the Expression of Uncertainty in Measta- meat （GUM）, all measurement results must have a stated uncertainty associated the titan. However, no CMMs give the uncertainty value of the roundness, because no suitable measrement uncertainty calculation procedure exists. In the case of roundness raeasurement in coordinate metrology, this paper suggests the algorithms for the calculation of the measurement uncertainty of the roudness deviation based on the two mainly used association criteria, LSC and MZC. The calculation of the sensitivity coefficients for the uncertainty calculatiion can be done by autnatic differentiation, in order to avoid introducing additional emars by the traditional difference quotient approxima- tions. The proposed methods are exact and need input data only as the nrasured coordinates of the data points and their associated un- certainties.

Evaluation of measurement uncertainty based on grey system theory for small samples from an unknown distribution

To evaluate measurement uncertainty for small sample size and measurement data from an unknown distribution, we propose a grey evaluation method of measurement uncertainty based on the grey relation coefficient. The uncertainty of measurement is analyzed using grey system theory, and the defects of the grey evaluation model of measurement uncertainty (GEMU) are studied. We then establish an improved grey evaluation model of measurement uncertainty (IGEMU). Simulations show that the precision of IGEMU is greater than that of GEMU, and that sample size has only a small effect on the precision of IGEVU. In particular, IGEMU is applied to evaluating measurement uncertainty for small sample size and measurement data from an unknown distribution. The measurement uncertainty of total profile deviation, which is measured by the CNC gear measuring center, can be evaluated by a combination of IGEMU and the Monte Carlo method.