ProTaper机用镍钛系统和不锈钢K锉预备磨牙根管的临床效果比较

目的比较Pro Taper机用镍钛系统和不锈钢K锉在预备磨牙根管方面的临床效果差异。方法随机选取2013年9月—2014年9月于我院就诊的牙髓炎及根尖周炎需要进行根管治疗的磨牙病例254例,按就诊顺序随机分为2组,其中Pro Taper机用镍钛系统实验组127例采用冠根向深入法预备根管,不锈钢K锉对照组127例采用常规ISO手用不锈钢根管锉预备根管,记录根管预备所用时间、术中术后疼痛情况及根充后X线片显示的根管充填效果来评估2种治疗方法的差异。结果根管预备时间实验组为(4.14±0.41)min,对照组为(6.46±0.43)min,差异有统计学意义(P<0.05);术中术后疼痛实验组为7.08%,对照组为18.89%,差异有统计学意义(P<0.05);X线示实验组恰填率92.91%,对照组恰填率74.80%,差异有统计学意义(P<0.05)。结论 2组预备器械比较,Pro Taper机用镍钛系统具有良好的根管成形性能,可缩短治疗时间,减轻疼痛,显著提高磨牙根管治疗的成功率。此根管预备系统值得在临床上推广应用。

The Formation of Colored Film on Stainless Steel and the Study for Surface Structure

This paper discusses the coloration process on the stainless steel and the properties of the film. The compositions, morphology and structure of colored films on stainless steel are studied by using SEM,AES,AFM,STM. The diffusion controlled mechanisms of films and calculation formula of surface electropotential difference are discussed.

Characterization of stress corrosion crack growth of 304 stainless steel by electrochemical noise and scanning Kelvin probe

The fatigue pre-cracking 304 stainless steel （SS） specimens with lengths of 1.002 mm （L-crack） and 0.575 mm （S-crack） were prepared. Their corrosion behavior was studied by electrochemical noise （EN） in 4 mol/L NaC1 ＋ 0.01 mol/L Na2S203 solution under slow-strain-rate-testing （SSRT） conditions. Moreover, the characteristics of L-crack＇s surface morphology and potential distribution with scanning Kelvin probe （SKP） before and after SSRT were also discussed. Compared with S-crack, L-crack is propagated and the features of crack propagation can be obtained. After propagation, the noise amplitudes increase with increasing stress and accelerating corrosion, the white noises at low and high frequencies （WE and WH） of the later stage are one order of magnitude larger than that at early stage in the current power spectral densities （PSDs）. The potential PSDs also increase, but WH disappears. In addition, the crack propagation can be demonstrated according to variation of probability distribution, surface morphology and potential distribution.

Physico-chemical properties and microstructure of hydroxyapatite-316L stainless steel biomaterials

Sintering shrinkage, compressive strength, bending strength, metallurgical morphology, microstructure and chemical composition diffusion of hydroxyapatite-316L stainless steel(HA-316L SS) composites were investigated. The results show that the sintering shrinkage of HA-316L SS composites decreases from 27.38% to 8.87% for cylinder sample or from 27.18% to 8.62% for cuboid sample with decreasing the volume ratio of HA to 316L SS, which leads to higher sintering activity of HA compared with that of 316L SS. The compressive strength of HA-316L SS composites changes just like parabolic curve (245.3→126.3→202.8 MPa) with reducing the volume ratio of HA to 316L SS. Bending strength increases from 86.3MPa to 124. 2 MPa with increasing the content of 316L SS. Furthermore, comprehensive mechanical properties of 1.0∶3.0 (volume ratio of HA to 316L SS) composite are optimal with compressive strength and bending strength equal to 202.8 MPa and 124.2 MPa, respectively. The (microstructure) and metallurgical structure vary regularly with the volume ratio of HA to 316L SS. Some chemical reaction takes place at the interface of the composites during sintering.

Technology of black coloring for stainless steel by electrochemical method

The technology of black coloring for stainless steel by electrochemical method was studied. The optimum bath compositions and operating conditions were obtained as follows: 4050g/L K2Cr2O7 , 1520g/L MnSO4, 1520g/L （NH4）2SO4, 2040g/L H3BO3, 2030 g/L additive A, 2 g/L （NH4）6Mo7O 24 ; time 920 min; temperature 1530℃; potential 3V and current density 12mA/cm 2 . The effects of the compositions of the bath on the quality of black colored film were discussed. The influences of passivation process on the black coloring velocity and performances of black colored film layer were investigated. The results show that the passivation process can improve the corrosion resistance and the stability to bear color-change; （NH4）2SO4 can control the black coloring velocity and prolong black coloring bath life remarkably; and additive A can improve the evenness and compactness of black colored film layer. The results of scanning electron microscopy and energy dispersive spectra show that the microstructure is of cylindrical lump, the filling process can decrease the crackles, and the main elements of black colored film are Fe, Cr, Mn and Ni.

Influence of chemical composition and cold deformation on aging precipitation behavior of high nitrogen austenitic stainless steels

The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN （HNS-A）, 18Cr-16Mn-I.3N （HNS-B）, 18Cr-18Mn-2Mo-0.96N （HNS-C） and 18Cr-18Mn-2Mo-0.77N （I-INS-D） high nitrogen austenitic stainless steels was investigated. The results show that the ＂nose＂ temperatures and incubation periods of the initial time-temperature-precipitation （TTP） curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.

Microstructure Analysis for Chemical Interaction between Cesium and SUS316 Steel in Fast Breeder Reactor Application

The objective of this study is to presume cesium corrosion process and its dominant factors in SUS316 steel, a fuel cladding material for fast breeder reactor application, based on both experimental results of cesium corrosion out-pile test and thermodynamic consideration. The cesium corrosion test was performed in simulated environment of high burn-up fuel pin. And main corrosion products in the specimen after the corrosion test were specified by TEM （transition electron microscopy） and SEM （scanning electron microscopy） in order to formulate a hypothesis of the cesium corrosion process. At the end of this study, it was found that the dominant factors of the corrosion process are the amount of cesium on the surface of the specimen, chromium content in the alloy, the supply rate of oxygen and temperature.

Surface analysis and electrochemical behaviour of the self-assembled polydopamine/dodecanethiol complex films in protecting 304 stainless steel

A self-assembled 1-dodecanethiol film assisted with the preferential adhesion of polydopamine was prepared on the non-etching 304 stainless steel surfaces by a simple dip-coating method.The formation and surface structure of the film were characterized by water contact angle measurement,atomic force microscopy(AFM),and X-ray photoelectron spectroscopy(XPS).The corrosion behavior of the complex films was evaluated by Tafel polarization curve and electrochemical impedance spectroscopy(EIS).The excellent corrosion resistance property could be attributed to the compact hybrid film structure and superior seawater stability for modified 304 stainless steel surface.