A series of styrene-acrylonitrile-acrylate(methyl acrylate,butyl acrylate,twelfth acrylate)terpolymers were prepared by bulk,solution and suspension polymeriation.The molecular weights of the terpolymers vary from 70,...A series of styrene-acrylonitrile-acrylate(methyl acrylate,butyl acrylate,twelfth acrylate)terpolymers were prepared by bulk,solution and suspension polymeriation.The molecular weights of the terpolymers vary from 70,000 to 140,000 determined by GPC.The composition of terpolymers could be controled by adjusting the proportion of monomer.展开更多
Acryionitrilv-methyi mcthacrylate copolymer was synthesized in aqueous solution by Redox. The copolymer was mixed with 10 - 40 wt% of microencapsulated n-octadecane （MieroPCMs） in water. Copolymer films containing M...Acryionitrilv-methyi mcthacrylate copolymer was synthesized in aqueous solution by Redox. The copolymer was mixed with 10 - 40 wt% of microencapsulated n-octadecane （MieroPCMs） in water. Copolymer films containing Mi- eroPCMs were cast at room temperature in N, N- imethyiformamide solution. The copolymer of acrylonitrile-methyl methacrylate and the copolymer films containing MicroPC- Ms were characterized by using Fourier Transform Infrared Spectroscopy （FTIR）, Differential Scanning Calorimetry （DSC）, Thermosravimetrlc Analyzer （TG）, X-ray Diffraction （XRD） and Scanning Electron Microscopy （SEM）, etc. The mierocapsules in the films are evenly distributed in the copolymer matrix. The heat-absorbing temperatures and heat-evolving temperatures of the films are almost the same as that of the MieroPCMs, respectively, and fluctuate in a slight range. In addition, the enthalpy efficiency of MieroPCMs rises with the contents of MicroPCMs increasing. The crystallirdty of the film increases with the contents of MicroPOMs increasing.展开更多
通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/AS...通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/ASA合金的低温冲击强度最高;当PC/ASA比例为7∶3,ASA胶含量为30%时,PC/ASA合金的低温冲击强度最高为36 k J/m^(2)。展开更多
文摘A series of styrene-acrylonitrile-acrylate(methyl acrylate,butyl acrylate,twelfth acrylate)terpolymers were prepared by bulk,solution and suspension polymeriation.The molecular weights of the terpolymers vary from 70,000 to 140,000 determined by GPC.The composition of terpolymers could be controled by adjusting the proportion of monomer.
基金Supported by National Natural Science Foundation of China (No.50573058) and Specialized Research Found for the Doctoral Programof Higher Education (No.20050058004)
文摘Acryionitrilv-methyi mcthacrylate copolymer was synthesized in aqueous solution by Redox. The copolymer was mixed with 10 - 40 wt% of microencapsulated n-octadecane （MieroPCMs） in water. Copolymer films containing Mi- eroPCMs were cast at room temperature in N, N- imethyiformamide solution. The copolymer of acrylonitrile-methyl methacrylate and the copolymer films containing MicroPC- Ms were characterized by using Fourier Transform Infrared Spectroscopy （FTIR）, Differential Scanning Calorimetry （DSC）, Thermosravimetrlc Analyzer （TG）, X-ray Diffraction （XRD） and Scanning Electron Microscopy （SEM）, etc. The mierocapsules in the films are evenly distributed in the copolymer matrix. The heat-absorbing temperatures and heat-evolving temperatures of the films are almost the same as that of the MieroPCMs, respectively, and fluctuate in a slight range. In addition, the enthalpy efficiency of MieroPCMs rises with the contents of MicroPCMs increasing. The crystallirdty of the film increases with the contents of MicroPOMs increasing.
文摘通过熔体流动速率、热变形温度和力学性能等指标变化评价了ASA胶含量及用量对PC/ASA合金性能的影响。结果表明,随着ASA用量的增加,合金的热变形温度下降;可以通过ASA胶含量和用量调节合金的流动性;不论合金的组成,ASA胶含量为30%的PC/ASA合金的低温冲击强度最高;当PC/ASA比例为7∶3,ASA胶含量为30%时,PC/ASA合金的低温冲击强度最高为36 k J/m^(2)。
