Abstract： In order to study the flammability and explosion property of gases during the propane oxidation to acrylic acid process, the explosion limits and the safety oxygen content of gases at the recycle gas compre...Abstract： In order to study the flammability and explosion property of gases during the propane oxidation to acrylic acid process, the explosion limits and the safety oxygen content of gases at the recycle gas compressor outlet, the reactor inlet, and the reactor outlet were theoretically calculated and experimentally tested. Finally, the inert limit was also determined. It showed that gases at the recycle gas compressor outlet and the reactor outlet were nonflammable based on three indicators： the explosion limits, the safety oxygen content and the inert limit. The C3H6 and O2 contents were higher at the reactor inlet, which made the mixed gases easily ignitable. However, the large amount of inert gases suppressed the possibility of explo- sion effectively. As a consequence, no explosion phenomenon would happen in all three locations. But gases at the reactor inlet are most dangerous, where more supervision on the concentration of gases and more strict control on the temperature and pressure should be implemented. Besides this, open flame, hot surfaces and other sources of ignition are prohibited in working spaces. The experimental results can be applied to similar process for oxidation of propane.展开更多
The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diamete...The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1.2-m EPM/air cloud explosion ignited by a 40-J electric spark initiated using a 40-J electric spark. Self-sustained detonation waves formed in SAD/EPM/air mixtures instead of in SAD/air mixtures. The stages and characteristics of the DDT process in SAD/air and SAD/EPM/air mixtures were studied and analyzed. Self-sustained detonation was evident from the existence of a transverse wave and a cellular structure. Moreover, a retonation wave formed during the DDT process in SAD/EPM/air clouds.展开更多
基金financially supported by the National Science and Technology Support Program of China(2012BAK13B01)
文摘Abstract： In order to study the flammability and explosion property of gases during the propane oxidation to acrylic acid process, the explosion limits and the safety oxygen content of gases at the recycle gas compressor outlet, the reactor inlet, and the reactor outlet were theoretically calculated and experimentally tested. Finally, the inert limit was also determined. It showed that gases at the recycle gas compressor outlet and the reactor outlet were nonflammable based on three indicators： the explosion limits, the safety oxygen content and the inert limit. The C3H6 and O2 contents were higher at the reactor inlet, which made the mixed gases easily ignitable. However, the large amount of inert gases suppressed the possibility of explo- sion effectively. As a consequence, no explosion phenomenon would happen in all three locations. But gases at the reactor inlet are most dangerous, where more supervision on the concentration of gases and more strict control on the temperature and pressure should be implemented. Besides this, open flame, hot surfaces and other sources of ignition are prohibited in working spaces. The experimental results can be applied to similar process for oxidation of propane.
基金supported by the National Natural Science Foundation of China (Grant No. 10772032)the Foundation of State Key Lab of Explosion Science and Technology (Grant Nos. ZDKT08-2-6, YBKT09-1)the National Basic Research Program of China (Grant No. 2011CB706900)
文摘The deflagration-to-detonation transitions (DDTs) for clouds of spherical aluminum dust (SAD) mixed with air or epoxypropane mist (EPM) and air were investigated in a 29.6-m-long experimental tube of 199 mm in diameter. The clouds formed through the injection of SAD and SAD/liquid epoxypropane samples into the experimental tube. Explosions of the SAD/air mixture were initiated using a 7-m-long EPM/air cloud explosion ignited by a 40-J electric spark. Explosions in SAD/EPM/air clouds were initiated using a 1.2-m EPM/air cloud explosion ignited by a 40-J electric spark initiated using a 40-J electric spark. Self-sustained detonation waves formed in SAD/EPM/air mixtures instead of in SAD/air mixtures. The stages and characteristics of the DDT process in SAD/air and SAD/EPM/air mixtures were studied and analyzed. Self-sustained detonation was evident from the existence of a transverse wave and a cellular structure. Moreover, a retonation wave formed during the DDT process in SAD/EPM/air clouds.
