In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding ...In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding processes.The melting points of magnesium(Mg)and copper(Cu)have a significant difference(nearly 400℃)and this may lead to a large difference in the microstructure and joint performance of Mg-Cu joints.However,diffusion bonding can be used to join these alloys without much difficulty.This work analyses the effect of parameters on diffusion layer thickness,hardness and strength of magnesium-copper dissimilar joints.The experiments were conducted using three-factor,five-level,central composite rotatable design matrix.Empirical relationships were developed to predict diffusion layer thickness,hardness and strength using response surface methodology.It is found that bonding temperature has predominant effect on bond characteristics.Joints fabricated at a bonding temperature of 450℃, bonding pressure of 12 MPa and bonding time of 30 min exhibited maximum shear strength and bonding strength of 66 and 81 MPa, respectively.展开更多
A statistically based optimization strategy is used to optimize the carbothermal reduction technology for the synthesis of LiFePO4/C using LiOH,FePO4 and sucrose as raw materials.The experimental data for fitting the ...A statistically based optimization strategy is used to optimize the carbothermal reduction technology for the synthesis of LiFePO4/C using LiOH,FePO4 and sucrose as raw materials.The experimental data for fitting the response are collected by the central composite rotatable design(CCD).A second order model for the discharge ca-pacity of LiFePO4/C is expressed as a function of sintering temperature,sintering time and carbon content.The ef-fects of individual variables and their interactions are studied by a statistical analysis(ANOVA).The results show that the linear effects and the quadratic effects of sintering temperature,carbon content and the interactions among these variables are statistically significant,while those effects of sintering time are insignificant.Response surface plots for spatial representation of the model illustrate that the discharge capacity depends on sintering temperature and carbon content more than sintering time.The model obtained gives the optimized reaction parameters of sinter-ing temperature at 652.0 ℃,carbon content of 34.33 g?mol-1 and 8.48 h sintering time,corresponding to a dis-charge capacity of 150.8 mA·h·g-1.The confirmatory test with these optimum parameters gives the discharge ca-pacity of 147.2 and 105.1 mA·h·g-1 at 0.5 and 5 C,respectively.展开更多
Spiral waves, whose rotation center can be regarded as a point defect, widely exist in various two-dimensional excitable systems. In this paper, by making use of Duan＇s topological current theory, we obtain the charg...Spiral waves, whose rotation center can be regarded as a point defect, widely exist in various two-dimensional excitable systems. In this paper, by making use of Duan＇s topological current theory, we obtain the charge density of spiral waves and the topological inner structure of its topological charge. The evolution of spiral wave is also studied from the topological properties of a two-dimensional vector field. The spiral waves are found generating or annihilating at the limit points and encountering, splitting, or merging at the bifurcation points of the two-dimensional vector field. Some applications of our theory are also discussed.展开更多
The present paper describes computational and experimental work on the vortex flow characteristics of a sharp-edged delta wing with a leading edge extension (LEX). Experiment was carried out using a low-speed wind tun...The present paper describes computational and experimental work on the vortex flow characteristics of a sharp-edged delta wing with a leading edge extension (LEX). Experiment was carried out using a low-speed wind tunnel that has a test section of 3.5 m(W)×2.45 m(H)×8.7 m(L). The angle of attack of the delta wing ranges from 10° to 30°. The free stream velocity is fixed at 20 m/s, which corresponds to Reynolds number of 0.88×106. Computations using the mass-averaged implicit 3D Navier-Stokes equations were applied to predict the complicated vortical flow over the delta wing. The governing equations were discretized in space using a fully implicit finite volume differencing formation. The standard k-e turbulent model was employed to close the governing equations. The present computations predicted the experimented flow field with a good accuracy.展开更多
基金support rendered through a Major Research Project No. F-31-51/2005(SR)
文摘In many circumstances,dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical forces without failure,which is not possible by fusion welding processes.The melting points of magnesium(Mg)and copper(Cu)have a significant difference(nearly 400℃)and this may lead to a large difference in the microstructure and joint performance of Mg-Cu joints.However,diffusion bonding can be used to join these alloys without much difficulty.This work analyses the effect of parameters on diffusion layer thickness,hardness and strength of magnesium-copper dissimilar joints.The experiments were conducted using three-factor,five-level,central composite rotatable design matrix.Empirical relationships were developed to predict diffusion layer thickness,hardness and strength using response surface methodology.It is found that bonding temperature has predominant effect on bond characteristics.Joints fabricated at a bonding temperature of 450℃, bonding pressure of 12 MPa and bonding time of 30 min exhibited maximum shear strength and bonding strength of 66 and 81 MPa, respectively.
基金Supported by the National Natural Science Foundation of China (50474092)GXNSFA (2011GXNSFA018015)
文摘A statistically based optimization strategy is used to optimize the carbothermal reduction technology for the synthesis of LiFePO4/C using LiOH,FePO4 and sucrose as raw materials.The experimental data for fitting the response are collected by the central composite rotatable design(CCD).A second order model for the discharge ca-pacity of LiFePO4/C is expressed as a function of sintering temperature,sintering time and carbon content.The ef-fects of individual variables and their interactions are studied by a statistical analysis(ANOVA).The results show that the linear effects and the quadratic effects of sintering temperature,carbon content and the interactions among these variables are statistically significant,while those effects of sintering time are insignificant.Response surface plots for spatial representation of the model illustrate that the discharge capacity depends on sintering temperature and carbon content more than sintering time.The model obtained gives the optimized reaction parameters of sinter-ing temperature at 652.0 ℃,carbon content of 34.33 g?mol-1 and 8.48 h sintering time,corresponding to a dis-charge capacity of 150.8 mA·h·g-1.The confirmatory test with these optimum parameters gives the discharge ca-pacity of 147.2 and 105.1 mA·h·g-1 at 0.5 and 5 C,respectively.
基金supported by National Natural Science Foundation of China and the Cuiying Programme of Lanzhou University
文摘Spiral waves, whose rotation center can be regarded as a point defect, widely exist in various two-dimensional excitable systems. In this paper, by making use of Duan＇s topological current theory, we obtain the charge density of spiral waves and the topological inner structure of its topological charge. The evolution of spiral wave is also studied from the topological properties of a two-dimensional vector field. The spiral waves are found generating or annihilating at the limit points and encountering, splitting, or merging at the bifurcation points of the two-dimensional vector field. Some applications of our theory are also discussed.
文摘The present paper describes computational and experimental work on the vortex flow characteristics of a sharp-edged delta wing with a leading edge extension (LEX). Experiment was carried out using a low-speed wind tunnel that has a test section of 3.5 m(W)×2.45 m(H)×8.7 m(L). The angle of attack of the delta wing ranges from 10° to 30°. The free stream velocity is fixed at 20 m/s, which corresponds to Reynolds number of 0.88×106. Computations using the mass-averaged implicit 3D Navier-Stokes equations were applied to predict the complicated vortical flow over the delta wing. The governing equations were discretized in space using a fully implicit finite volume differencing formation. The standard k-e turbulent model was employed to close the governing equations. The present computations predicted the experimented flow field with a good accuracy.
