Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diam...Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.展开更多
采用阳离子表面活性剂协助的自模板法合成了中空介孔Si O_2微球(HMSS),然后向含HMSS的悬浮液中加入醋酸钴溶液和氨水,让两种溶液经HMSS表面介孔进入空腔中反应生成Co_3O_4内核,合成了多核yolk-shell型Co_3O_4@m Si O_2(介孔Si O_2)纳米...采用阳离子表面活性剂协助的自模板法合成了中空介孔Si O_2微球(HMSS),然后向含HMSS的悬浮液中加入醋酸钴溶液和氨水,让两种溶液经HMSS表面介孔进入空腔中反应生成Co_3O_4内核,合成了多核yolk-shell型Co_3O_4@m Si O_2(介孔Si O_2)纳米反应器.结合XRD、XPS、SEM、STEM、BET等手段,分析了纳米反应器的形貌、结构、元素形态和比表面积.结果显示纳米反应器均匀分散,粒径约为300nm,表面布满介孔,内部分布大量Co_3O_4纳米粒子,拥有极大的比表面积161m^2/g,远大于Co_3O_4纳米粒子的比表面积35m^2/g,能有效吸附双酚A(BPA),1h吸附容量达12.7mg/g.多核yolk-shell型Co_3O_4@m Si O_2纳米反应器能高效催化过一硫酸氢盐(PMS)降解BPA,2h降解率达81.8%,远高于Co_3O_4纳米粒子的降解率51.3%,同时能节省PMS的投加量,避免水中盐度过高.此外,合成的纳米反应器具有很好的再利用性,在p H值3~9范围内表现出稳定而高效的催化性能.展开更多
Mesoporous silica nanoparticles （MSNs） are promising for drug delivery and other biomedical applications owing to their excellent chemical stability and biocompatibility. For these applications, a hollow morphology ...Mesoporous silica nanoparticles （MSNs） are promising for drug delivery and other biomedical applications owing to their excellent chemical stability and biocompatibility. For these applications, a hollow morphology with thin shell and open mesopores is preferred for MSNs in order to maximize the loading capacity of drugs. Herein we report a novel and direct synthesis of such an ideal drug delivery system in a dilute and alkaline solution of benzylcetyl- dimethylammonium chloride and diethylene glycol hexadecyl ether. The mixed surfactants can guide the formation of MSNs with cubic Ia3d mesostructure, and at a concentration of sodium hydroxide between 9.8 and 13.5 mM, hollow MSNs with uniform sizes of 90-120 nm and a single-unit-cell-thick shell are formed. A mechanism for the formation of the hollow Ia3d MSNs, designated as MMT-2, is proposed based on in situ small-angle X-ray scattering measurements and other analyses. MMT-2 exhibits much higher loading capacity of ibuprofen and degrades faster in simulated body fluid and phosphate buffered saline than non-hollow MSNs. The degradation of MMT-2 can be significantly retarded by modification with polyethylene glycol. More interestingly, the degradation of MMT-2 involves fragmentation instead of void formation, a phenomenon beneficial for their elimination. The results demonstrate the uniqueness of the hollow Ia3d MSNs and the great potential of the material for drug delivery and biomedical applications.展开更多
基金Projects (11KJB530002, CX10B-259Z) supported by Research Funds from Jiangsu Provincial Department of Education, ChinaProject (10zxfk35) supported by Sichuan Province Nonmetallic Composites and Functional Materials Key Laboratory Project, China
文摘Different-sized hollow SiO2 spheres of 249–1348 nm in diameter were successfully prepared by using Na2SiO3 as the precursor and using polystyrene and polystyrene-methyl acrylic acid latexes as the templates. The diameter and shell thickness of the hollow SiO2 spheres increase with increasing the latex template diameter at a given mass ratio of SiO2 to latex template. The diameter and shell thickness of the hollow SiO2 spheres also increase with increasing the mass ratios of SiO2 to latex template. The presence of carboxylic acid groups on the surfaces of polystyrene-methyl acrylic acid latex templates favors the formation of dense and uniform SiO2 shells. The hollow SiO2 sphere is constructed by mesoporous shell with large specific surface area. When glyphosate is used as a release model chemical, glyphosate release rate is tuned by varying the shell thickness.
文摘采用阳离子表面活性剂协助的自模板法合成了中空介孔Si O_2微球(HMSS),然后向含HMSS的悬浮液中加入醋酸钴溶液和氨水,让两种溶液经HMSS表面介孔进入空腔中反应生成Co_3O_4内核,合成了多核yolk-shell型Co_3O_4@m Si O_2(介孔Si O_2)纳米反应器.结合XRD、XPS、SEM、STEM、BET等手段,分析了纳米反应器的形貌、结构、元素形态和比表面积.结果显示纳米反应器均匀分散,粒径约为300nm,表面布满介孔,内部分布大量Co_3O_4纳米粒子,拥有极大的比表面积161m^2/g,远大于Co_3O_4纳米粒子的比表面积35m^2/g,能有效吸附双酚A(BPA),1h吸附容量达12.7mg/g.多核yolk-shell型Co_3O_4@m Si O_2纳米反应器能高效催化过一硫酸氢盐(PMS)降解BPA,2h降解率达81.8%,远高于Co_3O_4纳米粒子的降解率51.3%,同时能节省PMS的投加量,避免水中盐度过高.此外,合成的纳米反应器具有很好的再利用性,在p H值3~9范围内表现出稳定而高效的催化性能.
文摘Mesoporous silica nanoparticles （MSNs） are promising for drug delivery and other biomedical applications owing to their excellent chemical stability and biocompatibility. For these applications, a hollow morphology with thin shell and open mesopores is preferred for MSNs in order to maximize the loading capacity of drugs. Herein we report a novel and direct synthesis of such an ideal drug delivery system in a dilute and alkaline solution of benzylcetyl- dimethylammonium chloride and diethylene glycol hexadecyl ether. The mixed surfactants can guide the formation of MSNs with cubic Ia3d mesostructure, and at a concentration of sodium hydroxide between 9.8 and 13.5 mM, hollow MSNs with uniform sizes of 90-120 nm and a single-unit-cell-thick shell are formed. A mechanism for the formation of the hollow Ia3d MSNs, designated as MMT-2, is proposed based on in situ small-angle X-ray scattering measurements and other analyses. MMT-2 exhibits much higher loading capacity of ibuprofen and degrades faster in simulated body fluid and phosphate buffered saline than non-hollow MSNs. The degradation of MMT-2 can be significantly retarded by modification with polyethylene glycol. More interestingly, the degradation of MMT-2 involves fragmentation instead of void formation, a phenomenon beneficial for their elimination. The results demonstrate the uniqueness of the hollow Ia3d MSNs and the great potential of the material for drug delivery and biomedical applications.
