A transformation of naphthalene-based coalescenced mesophase pitch(NMP)to mesophase microbeads was achieved by heating a mixture of NMP and fullerene(C_(60)).This is different from the conventional process of the liqu...A transformation of naphthalene-based coalescenced mesophase pitch(NMP)to mesophase microbeads was achieved by heating a mixture of NMP and fullerene(C_(60)).This is different from the conventional process of the liquid-phase carbonization of isotropic pitch to the emergence of carbon microbeads in the matrix and finally their growth to form a 100%anisotropic bulk meso-phase,but rather a reverse transformation.The effects of C_(60) loading and reaction temperature on the morphological transformation of mesophase were investigated by polarizing optical and scanning electron microscopies.The physical changes in the NMP induced by C_(60) were characterized by thermogravimetric analysis,Fourier transform infrared spectroscopy,X-ray diffractometry and Raman spectroscopy.The results show that the coalesced NMP can be converted to a spherical type at 300-320℃ with the addition of 5%C_(60),and the size of the mesophase microbeads increases with increasing temperature.Furthermore,a model is established to ex-plain the unique induction effect of C_(60) in the transformation process.This work makes the morphological transformation of MP con-trollable,and provides a new idea for the understanding and research of mesophase pitch.展开更多
Shaft alignment is an important technique during installation and maintenance of a rotating machine. A high-precision laser alignment system has been designed with dual PSDs (Position Sensing Detector) to change tradi...Shaft alignment is an important technique during installation and maintenance of a rotating machine. A high-precision laser alignment system has been designed with dual PSDs (Position Sensing Detector) to change traditional manual way of shaft alignment and to make the measurement easier and more accurate. The system is comprised of two small measuring units (laser transmitter and detector) and a PDA (Personal Digital Assistant) with measurement software. The laser alignment system with dual PSDs was improved on a single PSD system, and yields higher measurement accuracy than the previous design, and has been successful for designing and implements actual shaft alignment. In the system, the range of offset measurement is ±4 mm, and the resolution is 1.5 μm, with accuracy being less than 2 μm.展开更多
This work aims to provide a relationship of how the key operational variables of frother type and impeller speed affect the size of bubble （D32）. The study was performed using pilot-scale equipment （0.8 m^3） that ...This work aims to provide a relationship of how the key operational variables of frother type and impeller speed affect the size of bubble （D32）. The study was performed using pilot-scale equipment （0.8 m^3） that is up to two orders of magnitude larger than equipment used for studies performed to date by others, and incorporated the key process variables of frother type and impeller speed. The results show that each frother family exhibits a unique CCC95-HLB relationship dependent on n （number of C-atoms in alkyl group） and m （number of propylene oxide group）. Empirical models were developed to predict CCC95 from HLB associated with other two parameters a and ft. The impeller speed-bubble size tests show that D32 is unaffected by increased impeller tip speed across the range of 4.6 to 9.2 m/s （representing the industrial operating range）, although D32 starts to increase below 4.6 m/s. The finding is valid for both coalescing and non-coalescing conditions. The results suggest that the bubble size and bubble size distribution （BSD） being created do not change with increasing impeller speed in the quiescent zone of the flotation.展开更多
Cultivated land transition and its driving mechanism are the hotspots among studies on land use change. In this study, we constructed a framework to study the driving mechanism of cultivated land transition from the q...Cultivated land transition and its driving mechanism are the hotspots among studies on land use change. In this study, we constructed a framework to study the driving mechanism of cultivated land transition from the quantitative perspective. Based on the vector data of land use in 1990, 2000 and 2009 of Yantai Proper, Shandong Province China, 11 explanatory variables were chosen from two aspects: the elevation, slope, cost distance to major water area and cost distance to minor water area, which presented physical factors; cost distance to district center, cost distance to town center, cost distance to city expansion center, cost distance to major roads, cost distance to city roads, cost distance to county roads and cost distance to rural roads, which presented the socio-economic factors. Combined with spatial analysis tools and Logistic regression analysis model, we construct Logistic regression analyses with four objectives that were urban construction land, rural residential land, orchard and other lands. The results show that, cost distance to district center, cost distance to town center, cost distance to city expansion center and cost distance to city roads are the significant explanatory variables for the transition of cultivated land into urban construction land. The main explained factors on the transition of cultivated land into rural residential land are slope, cost distance to town center, cost distance to county roads and cost distance to rural roads. Slope, cost distance to minor water area, cost distance to town center, cost distance to county roads and cost distance to rural roads are the significant explanatory variables for the transition of cultivated land into orchard land. Elevation, slope, cost distance to major water area and cost distance to minor water area are the main explanatory variables on the transition of cultivated land into other land uses.展开更多
During screening operation, blinding or clogging of screen perforations generally occurs to reduce the sieving capacity and efficiency. Recently, the flip-flow screening has been widely recognized as a feasible method...During screening operation, blinding or clogging of screen perforations generally occurs to reduce the sieving capacity and efficiency. Recently, the flip-flow screening has been widely recognized as a feasible method to deal with the problem. In this paper, a novel centralized-driving flip-flow screen(CFS) was developed for the separation of fine and moist coal, and the key structures, namely, a centralized-driving mechanism and a quasi-circle beam mounted with the mat were designed for high reliability and stability. By means of a test on an experimental prototype, the effect of some factors, i.e., initial stretch and hardness of the polyurethane panel, respectively, and the rotation speed of the driving motor on the kinematic characteristic of the screen surface was investigated. Results show that without an initial stretch, the sieve mat generates the largest vibratory amplitude while the slacker the sieve mat initially is, the smaller amplitude it will accomplish. And an increase in the rotation speed could cause a rise in the vibratory amplitude. Unlike the two factors, the hardness does not have a definite effect on the kinematic performance, on which a further study is required. Finally, screening processing on a laboratory prototype was conducted to draw the conclusion that the developed CFS also has a high sieving efficiency for the fine and moist coal.展开更多
The above therapeutic results show that TCM drugs have excellent effects in counteracting the metastasis of tumors. They can produce a synergistic effect when used together with surgery, radio- and chemotherapy. In an...The above therapeutic results show that TCM drugs have excellent effects in counteracting the metastasis of tumors. They can produce a synergistic effect when used together with surgery, radio- and chemotherapy. In analyzing the relationship between the factors that affect the distant metastasis, the authors strongly recommend that the FDM-survival rate be used, i.e. the survival rate free from distant metastasis as suggested by Hong Minghuang et al in their article. An analysis based on FDM-survival rate in a duration of three or five years with the data treated with the Kaplan-Meier and/or Life Table would be rational and convincible.展开更多
The purpose of this paper is to examine whether or not a financial crisis has an impact on the use of financial tools like MBO （management buy-outs）. For a long time LBO （leveraged buyout） has being considered as ...The purpose of this paper is to examine whether or not a financial crisis has an impact on the use of financial tools like MBO （management buy-outs）. For a long time LBO （leveraged buyout） has being considered as an easy and tax saving way to transfer the property rights of SMEs companies. Financial markets speculation on the same time used this tool in a non reasonable way and transformed it on a bubble increasing furthermore the financial crisis. In a certain extend this paper proves that what happened is a remake of what happened in the late 1990. From a theoretical point of view the article proves that the LBO＇s are just a partial answer to the agency problems very present to the literature.展开更多
Aiming at the deficiency of diagnosis method based on vibration signal,a novel method based on speed signal with singular value decomposition and Hilbert transform(SVD-HT)is proposed.The fault diagnosis mechanism base...Aiming at the deficiency of diagnosis method based on vibration signal,a novel method based on speed signal with singular value decomposition and Hilbert transform(SVD-HT)is proposed.The fault diagnosis mechanism based on the speed signal is obtained by constructing the shaft misalignment fault model firstly.Then the SVD-HT method is applied to the processing of the speed signal.The accuracy of the SVD-HT method is verified by comparing the diagnosis results of the order spectrum method and the SVD-HT method.After that,the diagnosis results based on vibration signal and speed signal under no-load and load patterns are compared.Under the no-load pattern,the amplitudes of the speed signal components f_(r),2f_(r) and 4f_(r) are linear with the misalignment.In addition,under the load pattern,the amplitudes of the speed signal components f_(r),2f_(r) and 4f_(r) have a linear relationship with the load.However,the diagnosis result of the vibration signal does not have the above characteristics.The comparison results verify the robustness and reliability of the speed signal and SVD-HT method.The method presented in this paper provides a novel way for misalignment fault diagnosis.展开更多
In recent years, the Chinese government has taken lots of measures to expand domestic demand and promote economic growth in response to the financial crisis. Accelerating the construction of indemnificatory housing is...In recent years, the Chinese government has taken lots of measures to expand domestic demand and promote economic growth in response to the financial crisis. Accelerating the construction of indemnificatory housing is one of the most important measures. In order to solve the problem of the insufficient supply of the indemnificatory housing, the government speed up the construction of indemnificatory housing and constantly expand the scale of the construction. With the increase of indemnificatory housing, the problem of construction fund is increasingly highlighted. Large-scale construction of indemnificatory housing in the short term results in large funds pressure. Indemnificatory housing fund has several notable features, it requires a large demand for money and the capital turnover time is quite long. Also, its poor liquidity makes it difficult to get your money out at any time. In this article, the present situation and existing problems of indemnificatory housing are analyzed, the countermeasures and suggestions are put forward combining the capital sources of indemnificatory housing, so as to provide reference for indemnificatory housing financing.展开更多
Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, ste...Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, steady condition numerical simulation is carried out, and the change of light-off temperatures and conversion efficiency with various SO2 contents is obtained. By grey relational analysis(GRA), the relational grade between conversion efficiency and SO2 content is obtained. And, the result shows that SO2 content has the most important influence on C3H6 and NOX conversion efficiency. This provides an important reference to the improvement of activity design of TWC, and may provide guidance for the condition design and optimization of TWC.展开更多
The content of China＇s economic transformation is not single, and this article argues that it includes three parts. The first is the reform of economic system, the second is the change in the pattern of economic grow...The content of China＇s economic transformation is not single, and this article argues that it includes three parts. The first is the reform of economic system, the second is the change in the pattern of economic growth, and the third is the adjustment of economic structure. Government is the leading force of China＇s economic transformation, and repeated reform of government institutions has brought about some changes to government functions. But problems are obvious that lag changes of government functions have become an obstacle in China＇s economic transformation. This article describes the historical evolution and the reality of China＇s economic transformation, and analyzes the main reasons of lag changes in government functions, and reveals that the transformation of government functions is the key for successful transformation of China＇s economy.展开更多
The major source of loss in modem compressors is the secondary loss. Non-axisymmetric endwall profile contouring is now a well established design methodology in axial flow turbines. However, flow development in axial ...The major source of loss in modem compressors is the secondary loss. Non-axisymmetric endwall profile contouring is now a well established design methodology in axial flow turbines. However, flow development in axial compressors is differ from turbines, the effects of non-axisymmetric endwall to axial compressors requires flow analysis in detail. This paper presents both experimental and numerical data to deal with the application of a non-axisymmetric hub endwall in a high-subsonic axial-flow compressor. The aims of the experiment here were to make sure the numerically obtained flow fields is the physical mechanism responsible for the improvement in efficiency, due to the non-axisymmetric hub endwall. The computational results were first compared with avail- able measured data of axisymmetric hub endwall. The results agreed well with the experimental data for estima- tion of the global performance. The coupled flow of the compressor rotor with non-axisymmetric hub endwall was simulated by a state-of-the-art multi-block flow solver. The non-axisymmetric hub endwall was designed for a subsonic compressor rotor with the help of sine and cosine functions. This type of non-axisymmetric hub end- wall was found to have a significant improvement in efficiency of 0.45% approximately and a slightly increase for the total pressure ratio. The fundamental mechanisms of non-axisymmetric hub endwall and their effects on the subsonic axial-flow compressor endwall flow field were analyzed in detail. It is concluded that the non-axisymmetric endwall profiling, though not optimum, can mitigate the secondary flow in the vicinity of the hub endwall, resulting in the improvement of aerodynamic performance of the compressor rotor.展开更多
文摘A transformation of naphthalene-based coalescenced mesophase pitch(NMP)to mesophase microbeads was achieved by heating a mixture of NMP and fullerene(C_(60)).This is different from the conventional process of the liquid-phase carbonization of isotropic pitch to the emergence of carbon microbeads in the matrix and finally their growth to form a 100%anisotropic bulk meso-phase,but rather a reverse transformation.The effects of C_(60) loading and reaction temperature on the morphological transformation of mesophase were investigated by polarizing optical and scanning electron microscopies.The physical changes in the NMP induced by C_(60) were characterized by thermogravimetric analysis,Fourier transform infrared spectroscopy,X-ray diffractometry and Raman spectroscopy.The results show that the coalesced NMP can be converted to a spherical type at 300-320℃ with the addition of 5%C_(60),and the size of the mesophase microbeads increases with increasing temperature.Furthermore,a model is established to ex-plain the unique induction effect of C_(60) in the transformation process.This work makes the morphological transformation of MP con-trollable,and provides a new idea for the understanding and research of mesophase pitch.
基金Project (No. 60337030) partly supported by the National NaturalScience Foundation of China
文摘Shaft alignment is an important technique during installation and maintenance of a rotating machine. A high-precision laser alignment system has been designed with dual PSDs (Position Sensing Detector) to change traditional manual way of shaft alignment and to make the measurement easier and more accurate. The system is comprised of two small measuring units (laser transmitter and detector) and a PDA (Personal Digital Assistant) with measurement software. The laser alignment system with dual PSDs was improved on a single PSD system, and yields higher measurement accuracy than the previous design, and has been successful for designing and implements actual shaft alignment. In the system, the range of offset measurement is ±4 mm, and the resolution is 1.5 μm, with accuracy being less than 2 μm.
基金Project supported by the Collaborative Research and Development Program of NSERC(Natural Sciences and Engineering Research Council of Canada) with Industrial Sponsorship from Vale,Teck Cominco,Xstrata Process Support,Agnico-Eagle,Shell Canada,Barrick Gold,COREM,SGS Lakefield Research and Flottec
文摘This work aims to provide a relationship of how the key operational variables of frother type and impeller speed affect the size of bubble （D32）. The study was performed using pilot-scale equipment （0.8 m^3） that is up to two orders of magnitude larger than equipment used for studies performed to date by others, and incorporated the key process variables of frother type and impeller speed. The results show that each frother family exhibits a unique CCC95-HLB relationship dependent on n （number of C-atoms in alkyl group） and m （number of propylene oxide group）. Empirical models were developed to predict CCC95 from HLB associated with other two parameters a and ft. The impeller speed-bubble size tests show that D32 is unaffected by increased impeller tip speed across the range of 4.6 to 9.2 m/s （representing the industrial operating range）, although D32 starts to increase below 4.6 m/s. The finding is valid for both coalescing and non-coalescing conditions. The results suggest that the bubble size and bubble size distribution （BSD） being created do not change with increasing impeller speed in the quiescent zone of the flotation.
基金Under the auspices of National Natural Science Foundation of China(No.41130748)
文摘Cultivated land transition and its driving mechanism are the hotspots among studies on land use change. In this study, we constructed a framework to study the driving mechanism of cultivated land transition from the quantitative perspective. Based on the vector data of land use in 1990, 2000 and 2009 of Yantai Proper, Shandong Province China, 11 explanatory variables were chosen from two aspects: the elevation, slope, cost distance to major water area and cost distance to minor water area, which presented physical factors; cost distance to district center, cost distance to town center, cost distance to city expansion center, cost distance to major roads, cost distance to city roads, cost distance to county roads and cost distance to rural roads, which presented the socio-economic factors. Combined with spatial analysis tools and Logistic regression analysis model, we construct Logistic regression analyses with four objectives that were urban construction land, rural residential land, orchard and other lands. The results show that, cost distance to district center, cost distance to town center, cost distance to city expansion center and cost distance to city roads are the significant explanatory variables for the transition of cultivated land into urban construction land. The main explained factors on the transition of cultivated land into rural residential land are slope, cost distance to town center, cost distance to county roads and cost distance to rural roads. Slope, cost distance to minor water area, cost distance to town center, cost distance to county roads and cost distance to rural roads are the significant explanatory variables for the transition of cultivated land into orchard land. Elevation, slope, cost distance to major water area and cost distance to minor water area are the main explanatory variables on the transition of cultivated land into other land uses.
基金The financial support from the National Natural Science Foundation of China (Nos. 51221462 and 51134022)the Doctoral Programs Foundation of Ministry of Education of China (No. 20120095110001)
文摘During screening operation, blinding or clogging of screen perforations generally occurs to reduce the sieving capacity and efficiency. Recently, the flip-flow screening has been widely recognized as a feasible method to deal with the problem. In this paper, a novel centralized-driving flip-flow screen(CFS) was developed for the separation of fine and moist coal, and the key structures, namely, a centralized-driving mechanism and a quasi-circle beam mounted with the mat were designed for high reliability and stability. By means of a test on an experimental prototype, the effect of some factors, i.e., initial stretch and hardness of the polyurethane panel, respectively, and the rotation speed of the driving motor on the kinematic characteristic of the screen surface was investigated. Results show that without an initial stretch, the sieve mat generates the largest vibratory amplitude while the slacker the sieve mat initially is, the smaller amplitude it will accomplish. And an increase in the rotation speed could cause a rise in the vibratory amplitude. Unlike the two factors, the hardness does not have a definite effect on the kinematic performance, on which a further study is required. Finally, screening processing on a laboratory prototype was conducted to draw the conclusion that the developed CFS also has a high sieving efficiency for the fine and moist coal.
文摘The above therapeutic results show that TCM drugs have excellent effects in counteracting the metastasis of tumors. They can produce a synergistic effect when used together with surgery, radio- and chemotherapy. In analyzing the relationship between the factors that affect the distant metastasis, the authors strongly recommend that the FDM-survival rate be used, i.e. the survival rate free from distant metastasis as suggested by Hong Minghuang et al in their article. An analysis based on FDM-survival rate in a duration of three or five years with the data treated with the Kaplan-Meier and/or Life Table would be rational and convincible.
文摘The purpose of this paper is to examine whether or not a financial crisis has an impact on the use of financial tools like MBO （management buy-outs）. For a long time LBO （leveraged buyout） has being considered as an easy and tax saving way to transfer the property rights of SMEs companies. Financial markets speculation on the same time used this tool in a non reasonable way and transformed it on a bubble increasing furthermore the financial crisis. In a certain extend this paper proves that what happened is a remake of what happened in the late 1990. From a theoretical point of view the article proves that the LBO＇s are just a partial answer to the agency problems very present to the literature.
基金National Key Research and Development Program of China(No.2017YFF0108100)。
文摘Aiming at the deficiency of diagnosis method based on vibration signal,a novel method based on speed signal with singular value decomposition and Hilbert transform(SVD-HT)is proposed.The fault diagnosis mechanism based on the speed signal is obtained by constructing the shaft misalignment fault model firstly.Then the SVD-HT method is applied to the processing of the speed signal.The accuracy of the SVD-HT method is verified by comparing the diagnosis results of the order spectrum method and the SVD-HT method.After that,the diagnosis results based on vibration signal and speed signal under no-load and load patterns are compared.Under the no-load pattern,the amplitudes of the speed signal components f_(r),2f_(r) and 4f_(r) are linear with the misalignment.In addition,under the load pattern,the amplitudes of the speed signal components f_(r),2f_(r) and 4f_(r) have a linear relationship with the load.However,the diagnosis result of the vibration signal does not have the above characteristics.The comparison results verify the robustness and reliability of the speed signal and SVD-HT method.The method presented in this paper provides a novel way for misalignment fault diagnosis.
基金This research work was financially supported by Youth Teacher Fund Project of Shanghai University （Z20001-17-19 （AAYQ17018））, （Z20001-17-15（ZZjq17015））, the Shanghai Board of Education （2016-SHNGE-03ZD ）, China Postdoctoral Science Foundation funded project （2013M531157）, and The Ministry of Education of Youth Fund Project of Humanities and Social Sciences Research （14YJC790152）
文摘In recent years, the Chinese government has taken lots of measures to expand domestic demand and promote economic growth in response to the financial crisis. Accelerating the construction of indemnificatory housing is one of the most important measures. In order to solve the problem of the insufficient supply of the indemnificatory housing, the government speed up the construction of indemnificatory housing and constantly expand the scale of the construction. With the increase of indemnificatory housing, the problem of construction fund is increasingly highlighted. Large-scale construction of indemnificatory housing in the short term results in large funds pressure. Indemnificatory housing fund has several notable features, it requires a large demand for money and the capital turnover time is quite long. Also, its poor liquidity makes it difficult to get your money out at any time. In this article, the present situation and existing problems of indemnificatory housing are analyzed, the countermeasures and suggestions are put forward combining the capital sources of indemnificatory housing, so as to provide reference for indemnificatory housing financing.
基金Project(2009CK2001) supported by the Science & Technology Development Key Program of Hunan Province STA of ChinaProject supported by the Young Teachers Program of Hunan University,China
文摘Combining a detailed catalytic surface reaction mechanism with noble metal and promoter elementary reactions, a new three-way catalytic converter(TWC) reaction mechanism is established. Based on the new mechanism, steady condition numerical simulation is carried out, and the change of light-off temperatures and conversion efficiency with various SO2 contents is obtained. By grey relational analysis(GRA), the relational grade between conversion efficiency and SO2 content is obtained. And, the result shows that SO2 content has the most important influence on C3H6 and NOX conversion efficiency. This provides an important reference to the improvement of activity design of TWC, and may provide guidance for the condition design and optimization of TWC.
文摘The content of China＇s economic transformation is not single, and this article argues that it includes three parts. The first is the reform of economic system, the second is the change in the pattern of economic growth, and the third is the adjustment of economic structure. Government is the leading force of China＇s economic transformation, and repeated reform of government institutions has brought about some changes to government functions. But problems are obvious that lag changes of government functions have become an obstacle in China＇s economic transformation. This article describes the historical evolution and the reality of China＇s economic transformation, and analyzes the main reasons of lag changes in government functions, and reveals that the transformation of government functions is the key for successful transformation of China＇s economy.
基金Financial supports for the work presented are provided by National Natural Science Foundation of China (Project No: 50806073)China Postdoctoral Science Foundation (Project No: 20070420068)K C Wong Education Foundation, these supports are greatly appreciated
文摘The major source of loss in modem compressors is the secondary loss. Non-axisymmetric endwall profile contouring is now a well established design methodology in axial flow turbines. However, flow development in axial compressors is differ from turbines, the effects of non-axisymmetric endwall to axial compressors requires flow analysis in detail. This paper presents both experimental and numerical data to deal with the application of a non-axisymmetric hub endwall in a high-subsonic axial-flow compressor. The aims of the experiment here were to make sure the numerically obtained flow fields is the physical mechanism responsible for the improvement in efficiency, due to the non-axisymmetric hub endwall. The computational results were first compared with avail- able measured data of axisymmetric hub endwall. The results agreed well with the experimental data for estima- tion of the global performance. The coupled flow of the compressor rotor with non-axisymmetric hub endwall was simulated by a state-of-the-art multi-block flow solver. The non-axisymmetric hub endwall was designed for a subsonic compressor rotor with the help of sine and cosine functions. This type of non-axisymmetric hub end- wall was found to have a significant improvement in efficiency of 0.45% approximately and a slightly increase for the total pressure ratio. The fundamental mechanisms of non-axisymmetric hub endwall and their effects on the subsonic axial-flow compressor endwall flow field were analyzed in detail. It is concluded that the non-axisymmetric endwall profiling, though not optimum, can mitigate the secondary flow in the vicinity of the hub endwall, resulting in the improvement of aerodynamic performance of the compressor rotor.
