串置翼型数值模拟及气动特性分析

串置机翼构型研究自从19世纪70年代之后已经成为航空领域的一个研究焦点。研究人员发现,此种布局构型除了结构和质量方面的优势,在理论上通过改变2个机翼之间的升力分布可以使得飞机的诱导阻力有较大减少。这种非常规布局为未来飞机设计提供了一个很好的选择。本文采用二维RANS方程求解器并结合S-A湍流模型对串置翼型在±6°翼差角的不同水平相对距离组合位置进行了数值模拟计算。计算结果表明,在负的翼差角下,水平相对位置越远,串翼系统的升阻比越高;在正的翼差角下,较近的水平相对位置升阻比较高。

Surface reconstruction of complex contour lines based on chain code matching technique

A new method for solving the tiling problem of surface reconstruction is proposed. The proposed method uses a snake algorithm to segment the original images, the contours are then transformed into strings by Freeman＇ s code. Symbolic string matching technique is applied to establish a correspondence between the two consecutive contours. The surface is composed of the pieces reconstructed from the correspondence points. Experimental results show that the proposed method exhibits a good behavior for the quality of surface reconstruction and its time complexity is proportional to mn where m and n are the numbers of vertices of the two consecutive slices, respectively.

论如何让词语成为撬动课文的支点

面对冗长、艰涩的文章,如何将文本解读得更自然、更有效,已成为教师开展有效教学的主要方面.从一个个词语出发,或牵一发而动全身,将文本串构成线;或深入挖掘充满意蕴的词语,使重点段落的解读更灵动;或发现平凡词语的精彩之处,升华文本的主题.这样的教学,使文本的解读更方便,教学更有效,学生思维更旷荡.

GaP/GaPN core/shell nanowire array on silicon for enhanced photoelectrochemical hydrogen production

Simultaneously improving the efficiency and stability on a large scale is significant for the development of photoelectrochemical(PEC)water splitting systems.Here,we demonstrated a novel design of GaP/GaPN core/shell nanowire(NW)decorated p-Si photocathode for improved PEC hydrogen production performance compared to that of bare p-Si photocathode.The formation of the p-n junction between p-Si and GaP NW promotes charge separation,and the lower conduction band position of GaPN relative to that of GaP further facilitates the transfer of photogenerated electrons to the electrode surface.In addition,the NW morphology both shortens the carrier collection distance and increases the specific surface area,which result in superior reaction kinetics.Moreover,introduction of N in GaP is beneficial for enhancing the light absorption as well as stability.Our efficient and facile strategy can be applied to other solar energy conversion systems as well.

Design of IP core based on AMBA bus

With the rapid development of integrated circuit(IC)technology,reusable intelligent property(IP)core design is widely valued by the industry.Based on the in-depth study of the functional characteristics of advanced microcontroller bus architecture(AMBA),a design scheme of IP core is presented,and it is divided into the functional modules,and the structural design of the IP core is completed.The relationship between the internal modules of the IP core is clarified,and the top-down design method is used to build the internal architecture of the IP core.The IP core interface module,register module,baud rate module,transmit module,receive module,and interrupt module are designed in detail by using Verilog language.The simulation results show that the designed IP core supports serial peripheral interface(SPI)protocol,the function coverage of IP core reaches 100%,the maximum working frequency reaches 200 MHz,and the resource occupancy rate is less than 15%.The reusable IP core can support multiple data formats,multiple timing transmission modes,and master/slave operation modes,reducing the resource consumption of hardware circuits and having stronger applicability.

Tuning strategies and structure effects of electrocatalysts for carbon dioxide reduction reaction

Carbon dioxide emissions have increased due to the consumption of fossil fuels,making the neutralization and utilization of CO_(2) a pressing issue.As a clean and efficient energy conversion process,electrocatalytic reduction can reduce carbon dioxide into a series of alcohols and acidic organic molecules,which can effectively realize the utilization and transformation of carbon dioxide.This review focuses on the tuning strategies and structure effects of catalysts for the electrocatalytic CO_(2) reduction reaction(CO_(2)RR).The tuning strategies for the active sites of catalysts have been reviewed from intrinsic and external perspectives.The structure effects for the CO_(2)RR catalysts have also been discussed,such as tandem catalysis,synergistic effects and confinement catalysis.We expect that this review about tuning strategies and structure effects can provide guidance for designing highly efficient CO_(2)RR electrocatalysts.

Ribotrap Analysis of Proteins Associated with FHL3 3'Untranslated Region in Glioma Cells

Objective To screen the proteins associated with four-and-a-half LIM domains 3(FHL3) 3' untranslated region(3'UTR) in glioma cells. Methods Western blot was adopted to detect the regulatory effect of poly(C)-binding protein 2(PCBP2) on FHL3. Biotin pull-down and sliver staining were employed to screen and verify the candidate binding proteins of FHL3 3'UTR. Then liquid chromatography-tandem mass spectrometry(LC-MS/MS) and molecule annotation system were used to identify and analyze the candidate binding proteins. Immunoprecipitation was conducted to study the interaction between PCBP2 and polypyrimidine tract-binding protein 1(PTBP1), a binding protein identified by LC-MS/MS. Results PCBP2 could bind to FHL3 mRNA 3'UTR-A and inhibited the expression of FHL3 in T98 G glioms cells. 22 candidate binding proteins were identified. Among them, there were 11 RNA binding proteins, including PCBP2. PTBP1 associated with FHL3 mRNA 3'UTR and interacted with PCBP2 protein. Conclusion PCBP2 and PTBP1 can both associate with FHL3 mRNA 3'UTR through forming a protein complex.

A 14.5Gb/s word alignment circuit in 0.18μm CMOS technology for high-speed SerDes

This paper presents a word alignment circuit for high speed SerDes system.By using pipeline structure and circuit optimization techniques,the speed of the aligner is increased,and its performance is improved further through adopting the full custom design method.The proposed word aligner has fabricated in 0.18μm CMOS technology with total area of 1.075 ×0.775mm^2￣ including I/O pad.Measurement results show that this circuit achieves the maximum data rate of 14.5Gb/s,while consuming a total power of 34.9mW from a 1.8V supply.

Constitutive equations of 1060 pure aluminum based on modified double multiple nonlinear regression model

In order to study the work-ability and establish the optimum hot formation processing parameters for industrial 1060 pure aluminum, the compressive deformation behavior of pure aluminum was investigated at temperatures of 523?823 K and strain rates of 0.005?10 s?1 on a Gleeble?1500 thermo-simulation machine. The influence rule of processing parameters (strain, strain rate and temperature) on flow stress of pure aluminum was investigated. Nine analysis factors consisting of material parameters and according weights were optimized. Then, the constitutive equations of multilevel series rules, multilevel parallel rules and multilevel series &parallel rules were established. The correlation coefficients (R) are 0.992, 0.988 and 0.990, respectively, and the average absolute relative errors (AAREs) are 6.77%, 8.70% and 7.63%, respectively, which proves that the constitutive equations of multilevel series rules can predict the flow stress of pure aluminum with good correlation and precision.

A Study on Triacylglycerol Composition and the Structure of High-Oleic Rapeseed Oil

The composition of fatty acids in triacylglycerides （TAGs） and their position on the glycerol backbone de- termine the nutritional value of vegetable oil. In this study, gas chromatography and high-performance liquid chromatography-tandem mass spectrometry （HPLC-MS/MS） were used to analyze the compo- sition and distribution of fatty acids in TAGs of different rapeseed oils. Our results show the content of oleic acid in higb-oleic-acid rapeseed oil to be about 80%. In terms of the number of acyl carbon atoms （CN）, TAGs with CN52-54 were most abundant, with a maximum concentration at CN54 （80%）. The main type of TAG was oleic-oleic-oleic （OOO）, accounting for 71.75%, while oleic-oleic-linoleic （OOL） accounted for ？.56%, oleic-oleic-linolenic （OOLn） accounted for 4.81%, and stearic-oleic-oleic （SO0） accounted for 4.74%. Oleic acid in high-oleic-acid rapeseed oil was distributed in the following order of preference： sn-2 〉 sn-1/3. In high-erucic-acid rapeseed oil, however, oleic acid was enriched at the sn-1/3. These data show that the content of oleic acid can be as high as about 80% in high-oleic-acid material. This finding suggests that high-oleic-acid rapeseed oil has high nutritional value.

An Effective Long String Searching Algorithm towards Component Security Testing

In the execution of method invocation sequences to test component security,abnormal or normal information is generated and recorded in a monitor log. By searching abnormal information from monitor log,the exceptions that the component has can be determined. To facilitate the searching process,string searching methods could be employed. However,current approaches are not effective enough to search long pattern string. In order to mine the specific information with less number of matches,we proposed an improved Sunday string searching algorithm in this paper. Unlike Sunday algorithm which does not make use of the already matched characters,the proposed approach presents two ideas — utilizing and recycling these characters. We take advantage of all matched characters in main string,if they are still in the matchable interval compared with pattern string,to increase the distance that pattern string moves backwards. Experimental analysis shows that,compared to Sunday algorithm,our method could greatly reduce the matching times,if the scale of character set constituting both main string and pattern string is small,or if the length of pattern string is long. Also,the proposed approach can improve the search effectiveness for abnormal information in component security testing.

High-yield Synthesis of Nanohybrid Shish-kebab Polyethylene-carbon Nanotube Structure

We report a novel method to prepare nanohybnd shish-kebab （NHSK） structure of polyethylene （PE）and carbon nanotube （CNT）. Pristine CNTs without surface modification with high concentration was effectively dispersed in xylene solution by a simple shearing method, which induces the quick crystallization of PE in xylene to form a novel NHSK structure with more dense and smaller PE kebab on CNT axis. The flocculated NHSK productwas transferred quickly from the xylene solution to the ethanol solution, in order to shorten the preparation time. The freeze-drying method was used in vacuum instead of high-temperature drying to avoid the aggregation of NHSK product. These improvements allow the formation of NHSK with an absolute yield of 200 mg.h-1, which is 2000 folds of that reported previously. It is favorable to apply this structured material in high performance nano- composite, by improving the compatibility of CNTs in p polymer and the interfacial force between CNTs and polymer.

Structural Synthesis and Workspaces of Serial Robotic Chains with 7 Axes

Redundant serial robot kinematic chains with seven axes are an extension of classical 6-axis ones. The structural synthesis of these structures is useful to provide a working basis, including for the promotion of new structures with 7 axes, besides some already existing and applied structures. This paper summarizes kinematic chain structures using a combinatorial method by listing all possible variants of the structures with 7 axes, obtained by adding a rotational or translational coupling, in a parallel or perpendicular position, against the guiding structure with 6 axes consisting of two distinct modules： positioning module （3 axes） and orientation module （3 axes）. Representation of proper workspaces can help the designer in choosing the structure with maximum functionality for a given application.

More constructions of APN and differentially 4-uniform functions by concatenation

We study further the method of concatenating the outputs of two functions for designing an APN or a differentially 4-uniform (n, n)-function for every even n. We deduce several specific constructions of APN or differentially 4-uniform (n, n)-functions from APN and differentially 4-uniform (n/2, n/2)-functions. We also give a construction of quadratic APN functions which includes as particular cases a previous construction by the author and a more recent construction by Pott and Zhou.

Doping-free tandem white organic light-emitting diodes

Tandem white organic light-emitting diodes(WOLEDs) are of great research interest since they can greatly boost the performance compared with the single-unit counterparts. However, their structures are more complicated than those of single-unit OLEDs. Besides, to achieve high performance, the doping technology is required to tandem OLEDs, particularly for tandem WOLEDs, further complicating the structures. Herein, doping-free tandem WOLEDs, for the first time, have been demonstrated. By managing an effective doping-free charge generation layer to interconnect doping-free emitting layers/charge transport layers, high-performance doping-free tandem WOLEDs have been developed. The blueyellow device accomplishes the simplified structure/short fabrication time/reduced cost/high efficiency/low efficiency roll-off/low voltage/high luminance trade-off, which cannot be achieved by previous tandem WOLEDs. Remarkably, the efficiency(81.2 cd A^(-1)) is ~2-fold higher than the highest efficiency of previous doping-free WOLEDs and even higher than those of some best doping tandem WOLEDs. The maximum luminance is 44,886 cd m^(-2), which is the highest for doping-free WOLEDs.Besides, the blue-red device can exhibit a color rendering index(CRI) of 67, which is even higher than that of some representative three-color tandem WOLEDs. Such findings may not only represent a significant step for doping-free WOLEDs, but unlock a novel avenue that doping-free tandem WOLEDs are promising to achieve the simplicity and high performance trade-off.

Clear-water local scouring around three piers in a tandem arrangement

Experiments of local scouring around three piers were carried out under steady clear-water conditions. We investigated the role of pier spacing and flow rate in scour depth and progression. The scour-hole depth around the upstream pier was the same as that for single piers and independent of pier spacing. The scour behavior of the middle and downstream piers progressed through a synchronous scouring region, a transition region, and a radical deviation region as the fluid velocity increased. The critical velocity from the synchronous scouring region to the transition region for the middle and downstream piers was the same, which linearly increased with pier spacing. The degree of deviation in the radical deviation region for the middle and downstream piers was dependent on the pier spacing. The critical velocity from the transition region to the radical deviation region for the middle pier increased with the pier spacing. When the spacing was larger than 11 times the diameter of a pier, the scour depths of the three-pier configuration were the same as for the single piers, which indicates the limit of inter-pier fluid–structure interaction. Finally, the data from this study are used to derive adjustment factors to predict the local scour depth around three piers.

Numerical Investigation & Comparison of a Tandem-Bladed Turbocharger Centrifugal Compressor Stage with Conventional Design

Extensive numerical investigations of the performance and flow structure in an unshrouded tandem-bladed centrifugal compressor are presented in comparison to a conventional compressor.Stage characteristics are explored for various tip clearance levels,axial spacings and circumferential clockings.Conventional impeller was modified to tandem-bladed design with no modifications in backsweep angle,meridional gas passage and camber distributions in order to have a true comparison with conventional design.Performance degradation is observed for both the conventional and tandem designs with increase in tip clearance.Linear-equation models for correlating stage characteristics with tip clearance are proposed.Comparing two designs,it is clearly evident that the conventional design shows better performance at moderate flow rates.However;near choke flow,tandem design gives better results primarily because of the increase in throat area.Surge point flow rate also seems to drop for tandem compressor resulting in increased range of operation.