In this study, we aim at obtaining inverse kinematic model of a serial manipulator using spatial operator algebra. For testing the inverse kinematic algorithm, the Vpython software program which has simultaneous view ...In this study, we aim at obtaining inverse kinematic model of a serial manipulator using spatial operator algebra. For testing the inverse kinematic algorithm, the Vpython software program which has simultaneous view and software working, is used. The aim is to measure the inverse kinematics modeling work on different serial manipulator mechanisms with spatial vector algebra. The algorithm is used with the same reference inputs on the recursive, exact and nonrecursive manipulators. During the tests, the permitted error tolerance is 0.01 cm. The graph plots show that the algorithm is fit for the error tolerance.展开更多
A five-axis serial-parallel kinematic milling machine, the SPKM 165, is introduced. This machine consists of a three-degree of-freedom parallel module and a two-degree-of-freedom serial table. The SPKM 165 is capable ...A five-axis serial-parallel kinematic milling machine, the SPKM 165, is introduced. This machine consists of a three-degree of-freedom parallel module and a two-degree-of-freedom serial table. The SPKM 165 is capable of five-face machining. A discussion of the inverse kinematics of the five-axis control is provided. A dimensional synthesis procedure is presented in terms of motion/force transmissibility. Finite-element analysis was used to evaluate the stiffness of a CAD model before the machine was manufactured. Kinematic calibration was implemented to improve the accuracy of the end effector. The results of a calibration experiment are presented. The stiffness of the developed machine was then measured. Milling experiments were conducted, and the test piece showed that the developed machine has satisfactory performance.展开更多
文摘In this study, we aim at obtaining inverse kinematic model of a serial manipulator using spatial operator algebra. For testing the inverse kinematic algorithm, the Vpython software program which has simultaneous view and software working, is used. The aim is to measure the inverse kinematics modeling work on different serial manipulator mechanisms with spatial vector algebra. The algorithm is used with the same reference inputs on the recursive, exact and nonrecursive manipulators. During the tests, the permitted error tolerance is 0.01 cm. The graph plots show that the algorithm is fit for the error tolerance.
基金supported in part by the National Natural Science Foundation of China (Grant No. 51075222)the Fund of State Key Laboratory of Tribology (Grant No. SKLT10C02)
文摘A five-axis serial-parallel kinematic milling machine, the SPKM 165, is introduced. This machine consists of a three-degree of-freedom parallel module and a two-degree-of-freedom serial table. The SPKM 165 is capable of five-face machining. A discussion of the inverse kinematics of the five-axis control is provided. A dimensional synthesis procedure is presented in terms of motion/force transmissibility. Finite-element analysis was used to evaluate the stiffness of a CAD model before the machine was manufactured. Kinematic calibration was implemented to improve the accuracy of the end effector. The results of a calibration experiment are presented. The stiffness of the developed machine was then measured. Milling experiments were conducted, and the test piece showed that the developed machine has satisfactory performance.
