Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a pie...Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a piezoelectric active member to control the vibration of a four-bay four-longern aluminum truss structure with cantilever boundary. The active member, which utilizes a piezoelectric actuating unit and an integrated load cell, is designed for vibration control of the space truss structures. Active damping control is realized using direct velocity feedback around the active member. The placement of the active member as one of the most important factor of affecting the control system performance, is also investigated by modal dissipation energy ratio as indicator. The active damping effectiveness is evaluated by comparing the closed-loop response with the open loop response.展开更多
In wind tunnel tests,long cantilever stings are usually used to support aerodynamic models.However,this kind of sting support system is prone to vibration problems due to its low damping,which limits the test envelope...In wind tunnel tests,long cantilever stings are usually used to support aerodynamic models.However,this kind of sting support system is prone to vibration problems due to its low damping,which limits the test envelope and affects the data quality.It is shown in many studies that the sting vibration can be effectively reduced by using active sting dampers based on piezoelectric actuators.This paper attempts to review the research progress of piezoelectric vibration control in wind tunnel tests,covering the design of active sting dampers,control methods and wind tunnel applications.First of all,different design schemes of active sting dampers are briefly introduced,along with the vibration damping principle.Then,a comprehensive review of the control methods for active sting dampers is presented,ranging from classic control methods,like PID control algorithm,to various intelligent control methods.Furthermore,the applications of active sting dampers and controllers in different wind tunnels are summarized to evaluate their vibration damping effect.Finally,the remaining problems that need to be solved in the future development of piezoelectric vibration control in wind tunnel tests are discussed.展开更多
On the basic of passive damping control, we do modeling and simulating in another approach to improve the vibration alleviating effect, the piezoelectric layer damping （PLD）, which is called active control. The piez...On the basic of passive damping control, we do modeling and simulating in another approach to improve the vibration alleviating effect, the piezoelectric layer damping （PLD）, which is called active control. The piezoelectric damping patches are under control of PID controller （matlab simulating） in voltage defference. Here, we use the software PRO/ENGINEER to design and model a wind turbine blade before using COMSOL to simulate the dynamic motion of the wind turbine blade and its interaction with aerodynamic force of wind in finite element method. Some different models are built-- the original turbine blade and the turbine blade with damping patches on different location and quantity. Then, according to the simulation results, we compare the effects of passive and active damping control, also the effect of patches locations and quantities under different wind speed. This research can provide a direction for future study about ways to decrease vibration of turbine blades.展开更多
文摘Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a piezoelectric active member to control the vibration of a four-bay four-longern aluminum truss structure with cantilever boundary. The active member, which utilizes a piezoelectric actuating unit and an integrated load cell, is designed for vibration control of the space truss structures. Active damping control is realized using direct velocity feedback around the active member. The placement of the active member as one of the most important factor of affecting the control system performance, is also investigated by modal dissipation energy ratio as indicator. The active damping effectiveness is evaluated by comparing the closed-loop response with the open loop response.
基金supported by the Foundation of National Key Laboratory on Ship Vibration and Noise(No. 614220400307)the National Natural Science Foundation of China(No.11872207)+1 种基金the Aeronautical Science Foundation of China(No. 20180952007)the Foundation of State Key Laboratory of Mechanics and Control of Mechanical Structures(No. MCMS-I-0520G01)
文摘In wind tunnel tests,long cantilever stings are usually used to support aerodynamic models.However,this kind of sting support system is prone to vibration problems due to its low damping,which limits the test envelope and affects the data quality.It is shown in many studies that the sting vibration can be effectively reduced by using active sting dampers based on piezoelectric actuators.This paper attempts to review the research progress of piezoelectric vibration control in wind tunnel tests,covering the design of active sting dampers,control methods and wind tunnel applications.First of all,different design schemes of active sting dampers are briefly introduced,along with the vibration damping principle.Then,a comprehensive review of the control methods for active sting dampers is presented,ranging from classic control methods,like PID control algorithm,to various intelligent control methods.Furthermore,the applications of active sting dampers and controllers in different wind tunnels are summarized to evaluate their vibration damping effect.Finally,the remaining problems that need to be solved in the future development of piezoelectric vibration control in wind tunnel tests are discussed.
文摘On the basic of passive damping control, we do modeling and simulating in another approach to improve the vibration alleviating effect, the piezoelectric layer damping （PLD）, which is called active control. The piezoelectric damping patches are under control of PID controller （matlab simulating） in voltage defference. Here, we use the software PRO/ENGINEER to design and model a wind turbine blade before using COMSOL to simulate the dynamic motion of the wind turbine blade and its interaction with aerodynamic force of wind in finite element method. Some different models are built-- the original turbine blade and the turbine blade with damping patches on different location and quantity. Then, according to the simulation results, we compare the effects of passive and active damping control, also the effect of patches locations and quantities under different wind speed. This research can provide a direction for future study about ways to decrease vibration of turbine blades.
