The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stabilit...The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.展开更多
Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may incre...Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may increase damping properties of the system, meanwhile it may result in instability of the system. It is stable when the feedback only occurs between the collocated sensors and actuators, but it may be unstable when there exists the feedback between sensors and actuators, which mainly depends on the property of the gain matrix of feedback. If the gain matrix is symmetric and definitely positive, the system is stable.展开更多
Aiming at the issue of yaw and rollover stability control for off-road vehicles with non-pneumatic mechanical elastic wheel(MEW),an integrated control system based on fuzzy differential braking is developed.By simplif...Aiming at the issue of yaw and rollover stability control for off-road vehicles with non-pneumatic mechanical elastic wheel(MEW),an integrated control system based on fuzzy differential braking is developed.By simplifying the structure of the MEW,a corresponding fitting brush tire model is constructed and its longitudinal and lateral tire force expressions are set up,respectively.Then,a nonlinear vehicle simulation model with MEW is established to validate the proposed control scheme based on Carsim.The designed yaw and rollover control system is a two-level structure with the upper additional moment controller,which utilizes a predictive load transfer ratio(PLTR)as the rollover index.In order to design the upper integrated control algorithm,fuzzy proportional-integral-derivative(PID)is adopted to coordinate the yaw and rollover control,simultaneously.And the lower control allocator realizes the additional moment to the vehicle by differential braking.Finally,a Carsim-simulink co-simulation model is constructed,and simulation results show that the integrated control system could improve the vehicle yaw and roll stability,and prevent rollover happening.展开更多
We study different types of projective synchronization （projective-anticipating, projective, and projectivelag synchronization） in a class of time-delayed chaotic systems related to optical bistable or hybrid optica...We study different types of projective synchronization （projective-anticipating, projective, and projectivelag synchronization） in a class of time-delayed chaotic systems related to optical bistable or hybrid optical bistable devices. We relax some limitations of previous work, where the scaling factor a can not be any desired value. In this paper, we achieve projective-anticipating, projective, and projective-lag synchronization without the limitation of a. A suitable controller is chosen using active control approach. Based on the Lyapunov stability theory, we derive the sufficient stability condition through theoretical analysis. The analytical results are validated by the numerical simulations using Ikeda model and Mackey-Glass model.展开更多
In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-...In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-DOF vehicle model with active front steering is built firstly, and then the fuzzy PID controller is designed in detail. The simulation investigations of the yaw stability with different steering ma- neuvers are performed. The simulation results show the effectiveness of the fuzzy PID controller for improving the vehicle＇s yaw stability.展开更多
Vehicle collision avoidance system is a kind of auxiliary driving system based on vehicle active safety,which can assist the driver to take the initiative to avoid obstacles under certain conditions,so as to effective...Vehicle collision avoidance system is a kind of auxiliary driving system based on vehicle active safety,which can assist the driver to take the initiative to avoid obstacles under certain conditions,so as to effectively improve the driving safety of vehicle.This paper presents a collision avoidance system for an autonomous vehicle based on an active front steering,which mainly consists of a path planner and a robust tracking controller.A path planner is designed based on polynomial parameterization optimized by simulated annealing algorithm,which plans an evasive trajectory to bypass the obstacle and avoid crashes.The dynamic models of the AFS system,vehicle as well as the driver model are established,and based on these,a robust tracking controller is proposed,which controls the system to resist external disturbances and work in accordance with the planning trajectory.The proposed collision avoidance system is testified through CarSim and Simulink combined simulation platform.The simulation results show that it can effectively track the planning trajectory,and improve the steering stability and anti-interference performance of the vehicle.展开更多
文摘The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.
文摘Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may increase damping properties of the system, meanwhile it may result in instability of the system. It is stable when the feedback only occurs between the collocated sensors and actuators, but it may be unstable when there exists the feedback between sensors and actuators, which mainly depends on the property of the gain matrix of feedback. If the gain matrix is symmetric and definitely positive, the system is stable.
基金Project(11672127)supported by the National Natural Science Foundation of ChinaProject(NHAl3002)supported by the Major Exploration Project of the General Armaments Department of China+1 种基金Project(KYCX17_0240)supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province,ChinaProjects(NP2016412,NP2018403,NT2018002)supported by the Fundamental Research Funds for the Central Universities,China
文摘Aiming at the issue of yaw and rollover stability control for off-road vehicles with non-pneumatic mechanical elastic wheel(MEW),an integrated control system based on fuzzy differential braking is developed.By simplifying the structure of the MEW,a corresponding fitting brush tire model is constructed and its longitudinal and lateral tire force expressions are set up,respectively.Then,a nonlinear vehicle simulation model with MEW is established to validate the proposed control scheme based on Carsim.The designed yaw and rollover control system is a two-level structure with the upper additional moment controller,which utilizes a predictive load transfer ratio(PLTR)as the rollover index.In order to design the upper integrated control algorithm,fuzzy proportional-integral-derivative(PID)is adopted to coordinate the yaw and rollover control,simultaneously.And the lower control allocator realizes the additional moment to the vehicle by differential braking.Finally,a Carsim-simulink co-simulation model is constructed,and simulation results show that the integrated control system could improve the vehicle yaw and roll stability,and prevent rollover happening.
基金Supported by Research Project of Hubei Provincial Department of Education under Grant No.Q20101609Foundation of Wuhan Textile University under Grant No.105040
文摘We study different types of projective synchronization （projective-anticipating, projective, and projectivelag synchronization） in a class of time-delayed chaotic systems related to optical bistable or hybrid optical bistable devices. We relax some limitations of previous work, where the scaling factor a can not be any desired value. In this paper, we achieve projective-anticipating, projective, and projective-lag synchronization without the limitation of a. A suitable controller is chosen using active control approach. Based on the Lyapunov stability theory, we derive the sufficient stability condition through theoretical analysis. The analytical results are validated by the numerical simulations using Ikeda model and Mackey-Glass model.
基金Supported by the National Natural Science Foundation of China （No.50705008）
文摘In order to improve the yaw stability of the vehicle with active front steering system, an adaptive PID-type fuzzy control scheme is designed to make the yaw rate tracking the desired values as close as possible. A 2-DOF vehicle model with active front steering is built firstly, and then the fuzzy PID controller is designed in detail. The simulation investigations of the yaw stability with different steering ma- neuvers are performed. The simulation results show the effectiveness of the fuzzy PID controller for improving the vehicle＇s yaw stability.
基金supported by the Research Project of Advanced Manufacture Technology for Automobile Parts(Chongqing University of Technology)Ministry of Education(Grant No.2015KLMT04)the National Natural Science Foundation of China(Grant No.51375007 and 51605219)
文摘Vehicle collision avoidance system is a kind of auxiliary driving system based on vehicle active safety,which can assist the driver to take the initiative to avoid obstacles under certain conditions,so as to effectively improve the driving safety of vehicle.This paper presents a collision avoidance system for an autonomous vehicle based on an active front steering,which mainly consists of a path planner and a robust tracking controller.A path planner is designed based on polynomial parameterization optimized by simulated annealing algorithm,which plans an evasive trajectory to bypass the obstacle and avoid crashes.The dynamic models of the AFS system,vehicle as well as the driver model are established,and based on these,a robust tracking controller is proposed,which controls the system to resist external disturbances and work in accordance with the planning trajectory.The proposed collision avoidance system is testified through CarSim and Simulink combined simulation platform.The simulation results show that it can effectively track the planning trajectory,and improve the steering stability and anti-interference performance of the vehicle.
