An environmentally friendly biodegradable chelant,[S,S]-ethylenediaminedisuccinic acid(EDDS),was used to separate heavy metals from sewage sludge based on chemical extraction technology.The extraction of zinc from sew...An environmentally friendly biodegradable chelant,[S,S]-ethylenediaminedisuccinic acid(EDDS),was used to separate heavy metals from sewage sludge based on chemical extraction technology.The extraction of zinc from sewage sludge with an aqueous solution of EDDS was studied under various conditions.It is found that the extraction efficiency of zinc using EDDS is equivalent to that using ethylenediaminetetraacetic acid(EDTA)at the molar ratio of chelant to total heavy metals of 1:1 over pH range of 5-9.EDDS is capable of extracting zinc from the sludge.The extraction efficiency is improved obviously and reaches a higher value within pH range from 3 to 10.The extraction efficiency maintains at about 65% when pH≥4.5 and the ratio of 10:1.By comparing the species contents of the zinc in sewage sludge before and after the extraction,it is found that the extracted zinc mainly comes from the acid soluble,reducible and oxidizable fractions.展开更多
A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that...A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.展开更多
基金Project(2012Y0061)supported by Key Program of Department of Science and Technology of Fujian Province,ChinaProject(2012D123)supported by the Natural Science Foundation of Fujian Province,China+1 种基金Project(JK2011055)supported by the Natural Science Foundation of the Educational Department of Fujian Province,ChinaProject(2010H2006)supported by the Science and Technology Innovation Platform Project of Department of Science and Technology of Fujian Province,China
文摘An environmentally friendly biodegradable chelant,[S,S]-ethylenediaminedisuccinic acid(EDDS),was used to separate heavy metals from sewage sludge based on chemical extraction technology.The extraction of zinc from sewage sludge with an aqueous solution of EDDS was studied under various conditions.It is found that the extraction efficiency of zinc using EDDS is equivalent to that using ethylenediaminetetraacetic acid(EDTA)at the molar ratio of chelant to total heavy metals of 1:1 over pH range of 5-9.EDDS is capable of extracting zinc from the sludge.The extraction efficiency is improved obviously and reaches a higher value within pH range from 3 to 10.The extraction efficiency maintains at about 65% when pH≥4.5 and the ratio of 10:1.By comparing the species contents of the zinc in sewage sludge before and after the extraction,it is found that the extracted zinc mainly comes from the acid soluble,reducible and oxidizable fractions.
基金Project(2011SK3262) supported by Science and Technology Program of Hunan Province,China
文摘A two-step leaching method in combination of acid and ethylene diaminetetraacetic acid disodium （EDTA-Na2） was applied to extract metals such as Cd, Cu, Fe, Pb and Zn from a zinc smelting slag. The results show that the extraction rates of Cd, Cu, Fe and Zn in slag reach 88.3%, 54.1%, 69.6% and 54.7%, respectively, while the extraction rate of Pb is only 0.05% leached with 1.25 mol/L sulfuric acid under the conditions of the ratio of slag to liquid of 100 g/L, 65 ℃ and 120 r/min for 2 h. However, Pb extraction rate from 1.25 mol/L sulfuric acid leached residue reaches as high as 66.5% by using 0.1 mol/L EDTA-Na2 solution. The results indicate that two-step sequential extraction procedure combining 1.25 mol/L sulfuric acid and 0.1 mol/L EDTA-Na2 solution can extensively extract Cd, Cu, Fe, Pb and Zn from zinc smelting slag.
