Extraction behaviour of Cadmiun（Ⅱ） with a new trilon N,N′-di（dodecyl）ethylenediamien-di-acetic acid （H2R2Y） in chloroform was investigated.Complex ratio between H2R2Y and Cd2+ 1∶1 was substantiationed by cond...Extraction behaviour of Cadmiun（Ⅱ） with a new trilon N,N′-di（dodecyl）ethylenediamien-di-acetic acid （H2R2Y） in chloroform was investigated.Complex ratio between H2R2Y and Cd2+ 1∶1 was substantiationed by conductance and mole ratio method.The influence of acidity,concentration of H2R2Y,phase-radio and temperature of extraction reaction was studied.The results indicated that:percentage extraction of Cd（Ⅱ） increased with the increase of the concentration of H2R2Y and the distribution ratio lgD decreased linearly with the increase of temperature.ΔHo=-7.254KJ·mol-1 for the extraction reaction.展开更多
Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two add...Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two additives on electrodeposition behavior, composition, morphology, and corrosion performance of the Zn-Ni alloys were investigated. The electrodeposition behaviors of Zn-Ni alloy revealed by the cyclic voltammetry show that the addition of EDTA to the Zn-Ni electrolyte enhances the Zn incorporation into the alloy film while the addition of NH4C1 produces an opposite effect by suppressing Zn incorporation into the film. With an increase of EDTA concentration in the electrolyte, the Zn content of the Zn-Ni films increases, while the grain size of the deposits and the current efficiency of the plating process decrease. The increase of NH4C1 concentration in the electrolyte would significantly refine the grain size of the electrodeposited Zn-Ni films, reduce the Zn content and increase the cathodic current efficiency. The corrosion testing indicates that the barrier corrosion resistances of Zn-Ni films electrodeposited from NHnC1 containing electrolytes are superior to those electrodeposited from EDTA-containing electrolytes, which in turn are superior to those electrodeposited from additive-free electrolytes.展开更多
EDTA was used as an enhancer for Fe 2+ catalyzed light emission from luminol oxidation by dissolved oxygen. As a result, the limit of detection for ferrous ion with flow injection analysis was improved by a fact...EDTA was used as an enhancer for Fe 2+ catalyzed light emission from luminol oxidation by dissolved oxygen. As a result, the limit of detection for ferrous ion with flow injection analysis was improved by a factor of 160 by addition of EDTA to the luminol solution. Fe 2+ and Fe 3+ were determined simultaneously with a novel copper-coated zinc reductor minicolumn installed in one of the shunt after sample splitting in the manifold. The reductor minicolumn can be used for 3000 determinations at least. The dynamic range of determination was 1×10 -9 ～1×10 -5 mol·L -1 , with the limit of detection of 2.7×10 10 and 3.5×10 10 mol·L 1 ,for Fe 2+ and Fe 3+ , respectively. The preci sion for determination of 2×10 7 mol·L 1 of Fe 2+ and Fe 3+ was 2.3% and 4.0% (n=8), respectively, at a sampling rate of 60 h -1 . Cr 3+ and Co 2+ interfere. Fe 2+ and Fe 3+ in mixture were determined with satisfactory results. Samples of Fe 2+ and Fe 3+ were determined simultaneously and the results in good agreement with the standard spectrophotometric method. Indications were shown that EDTA functions as an enhancer, Fe 2+ as a catalyst, and oxygen is the oxidant of the chemiluminescent reaction, and the mechanism of the reaction was discussed.展开更多
Post-synthetic treatment of high-silica as-made ZSM-5 with organic template in the micropores was explored to reduce/remove the external surface acid density of ZSM-5. It is found that Na_2H_2 EDTA treatment can selec...Post-synthetic treatment of high-silica as-made ZSM-5 with organic template in the micropores was explored to reduce/remove the external surface acid density of ZSM-5. It is found that Na_2H_2 EDTA treatment can selectively remove the surface Al atoms, but generates new acid sites（likely silanol nests） on the external surface. H_3PO_4 treatment is unable to remove surface Al atoms, while small amount of P is left on the external surface, which effectively decreases the acid density. The catalytic performance of the resultant materials is evaluated in the methanol conversion reaction. H_3PO_4 treatment can effectively improve both the catalytic lifetime and the stability of propene selectivity.This occurs due to a combination of the increased tolerance to the external coke deposition and the depressed coking rate（reduced side reactions）. Na_2H_2 EDTA treatment only prolongs the catalytic lifetime, resulting from the improved tolerance to the external coke deposition. Under the optimized H_3PO_4 treatment condition, the resultant ZSM-5 gives a catalytic lifetime of about 1.5 times longer than the precursor. Moreover, the propene selectivity is improved, showing a slight increasing trend until the deactivation.展开更多
文摘Extraction behaviour of Cadmiun（Ⅱ） with a new trilon N,N′-di（dodecyl）ethylenediamien-di-acetic acid （H2R2Y） in chloroform was investigated.Complex ratio between H2R2Y and Cd2+ 1∶1 was substantiationed by conductance and mole ratio method.The influence of acidity,concentration of H2R2Y,phase-radio and temperature of extraction reaction was studied.The results indicated that:percentage extraction of Cd（Ⅱ） increased with the increase of the concentration of H2R2Y and the distribution ratio lgD decreased linearly with the increase of temperature.ΔHo=-7.254KJ·mol-1 for the extraction reaction.
基金Projects(51271169,51001089) supported by the National Natural Science Foundation of China
文摘Two additives of ethylene diamine tetraacetic acid （EDTA） and ammonium chloride （NH4C1） were separately used in the electrodeposition of Zn-Ni alloy films from a deep eutectic solvent. The effects of these two additives on electrodeposition behavior, composition, morphology, and corrosion performance of the Zn-Ni alloys were investigated. The electrodeposition behaviors of Zn-Ni alloy revealed by the cyclic voltammetry show that the addition of EDTA to the Zn-Ni electrolyte enhances the Zn incorporation into the alloy film while the addition of NH4C1 produces an opposite effect by suppressing Zn incorporation into the film. With an increase of EDTA concentration in the electrolyte, the Zn content of the Zn-Ni films increases, while the grain size of the deposits and the current efficiency of the plating process decrease. The increase of NH4C1 concentration in the electrolyte would significantly refine the grain size of the electrodeposited Zn-Ni films, reduce the Zn content and increase the cathodic current efficiency. The corrosion testing indicates that the barrier corrosion resistances of Zn-Ni films electrodeposited from NHnC1 containing electrolytes are superior to those electrodeposited from EDTA-containing electrolytes, which in turn are superior to those electrodeposited from additive-free electrolytes.
文摘EDTA was used as an enhancer for Fe 2+ catalyzed light emission from luminol oxidation by dissolved oxygen. As a result, the limit of detection for ferrous ion with flow injection analysis was improved by a factor of 160 by addition of EDTA to the luminol solution. Fe 2+ and Fe 3+ were determined simultaneously with a novel copper-coated zinc reductor minicolumn installed in one of the shunt after sample splitting in the manifold. The reductor minicolumn can be used for 3000 determinations at least. The dynamic range of determination was 1×10 -9 ～1×10 -5 mol·L -1 , with the limit of detection of 2.7×10 10 and 3.5×10 10 mol·L 1 ,for Fe 2+ and Fe 3+ , respectively. The preci sion for determination of 2×10 7 mol·L 1 of Fe 2+ and Fe 3+ was 2.3% and 4.0% (n=8), respectively, at a sampling rate of 60 h -1 . Cr 3+ and Co 2+ interfere. Fe 2+ and Fe 3+ in mixture were determined with satisfactory results. Samples of Fe 2+ and Fe 3+ were determined simultaneously and the results in good agreement with the standard spectrophotometric method. Indications were shown that EDTA functions as an enhancer, Fe 2+ as a catalyst, and oxygen is the oxidant of the chemiluminescent reaction, and the mechanism of the reaction was discussed.
文摘Post-synthetic treatment of high-silica as-made ZSM-5 with organic template in the micropores was explored to reduce/remove the external surface acid density of ZSM-5. It is found that Na_2H_2 EDTA treatment can selectively remove the surface Al atoms, but generates new acid sites（likely silanol nests） on the external surface. H_3PO_4 treatment is unable to remove surface Al atoms, while small amount of P is left on the external surface, which effectively decreases the acid density. The catalytic performance of the resultant materials is evaluated in the methanol conversion reaction. H_3PO_4 treatment can effectively improve both the catalytic lifetime and the stability of propene selectivity.This occurs due to a combination of the increased tolerance to the external coke deposition and the depressed coking rate（reduced side reactions）. Na_2H_2 EDTA treatment only prolongs the catalytic lifetime, resulting from the improved tolerance to the external coke deposition. Under the optimized H_3PO_4 treatment condition, the resultant ZSM-5 gives a catalytic lifetime of about 1.5 times longer than the precursor. Moreover, the propene selectivity is improved, showing a slight increasing trend until the deactivation.
