Esterification of methyl alcohol with acetic acid catalysed by Amberlyst-15 (cation-exchange resin) was carried out in a batch reactor in the temperature ranging between 318-338 K, at atmospheric pressure. The reactio...Esterification of methyl alcohol with acetic acid catalysed by Amberlyst-15 (cation-exchange resin) was carried out in a batch reactor in the temperature ranging between 318-338 K, at atmospheric pressure. The reaction rate increased with increase in catalyst concentration and reaction temperature, but decreased with an increase in water concentration. Stirrer speed had virtually no effect on the rate under the experimental conditions. The rate data were correlated with a second-order kinetic model based on homogeneous reaction. The apparent activation energy was found to be 22.9kJ mol-1 for the formation of methyl acetate. The methyl acetate production was carried out as batch and continuous in a packed bed reactive distillation column with high purity methyl acetate produced.展开更多
Continuous homogenous azeotropic distillation(CHAD) and pressure-swing distillation(PSD) are explored to separate a minimum-boiling azeotropic system of ethyl acetate and n-hexane. The CHAD process with acetone as the...Continuous homogenous azeotropic distillation(CHAD) and pressure-swing distillation(PSD) are explored to separate a minimum-boiling azeotropic system of ethyl acetate and n-hexane. The CHAD process with acetone as the entrainer and the PSD process with the pressures of 0.1 MPa and 0.6 MPa in two columns are designed and simulated by Aspen Plus. The operating conditions of the two processes are optimized via a sequential modular approach to obtain the minimum total annual cost(TAC). The computational results show that the partially heat integrated pressure-swing distillation(HIPSD) has reduced in the energy cost and TAC by 40.79% and 35.94%, respectively, than the conventional PSD, and has more greatly reduced the energy cost and TAC by 62.61% and 49.26% respectively compared with the CHAD process. The comparison of CHAD process and partially HIPSD process illustrates that the partially HIPSD has more advantages in averting the product pollution, energy saving, and economy.展开更多
Reactive dividing wall column(RDWC) is a highly integrated unit which combines reaction distillation(RD) with dividing wall column separation technology into one shell, and it realized the chemical reaction and the se...Reactive dividing wall column(RDWC) is a highly integrated unit which combines reaction distillation(RD) with dividing wall column separation technology into one shell, and it realized the chemical reaction and the separation of multiple product fractions simultaneously. In this paper, the reaction of esterification with acetic acid and ethanol to produce ethyl acetate was used as the research system, experiments and simulations of the RDWC were carried out. This system in the traditional process mostly used the homogeneous catalyst(e.g. sulfuric acid). However, in view of the corrosion of the equipment caused by the acidity of the catalyst, we used the heterogeneous catalysts – iron exchange resins – Amberlyst15 and proposed a novel catalyst loading method. Firstly,the reliability of the model of the simulation was verified by the experimental study on the change of liquid split ratio and reflux ratio. After that, the four-column model was established in Aspen Plus to analyze the effects of the amount of azeotropic agent, reflux ratio and acetic acid concentration. Finally, for a fair comparison, the economic analysis was conducted between traditional RD column and RDWC. The results showed that RDWC can save34.7% of total operating costs and 18.5% of TAC.展开更多
In this paper, a theoretical-economic study was carried out based on the operation and construction of different types of equipments that use solar energy to carry out the distillation process. The conclusions drawn f...In this paper, a theoretical-economic study was carried out based on the operation and construction of different types of equipments that use solar energy to carry out the distillation process. The conclusions drawn from the analysis aimed to determine what is necessary for the optimal design of an experimental distillation module that allows bioethanol with specific features to be obtained, for the area of Tehuantepec in Mexico. This study took the experiments carried out by various authors and extracted information relevant to the selection of the parameters and variables of the proposed distiller according to their efficiency and construction costs.展开更多
基金the Research Fund of Istanbul University. Project number: 944/090597.
文摘Esterification of methyl alcohol with acetic acid catalysed by Amberlyst-15 (cation-exchange resin) was carried out in a batch reactor in the temperature ranging between 318-338 K, at atmospheric pressure. The reaction rate increased with increase in catalyst concentration and reaction temperature, but decreased with an increase in water concentration. Stirrer speed had virtually no effect on the rate under the experimental conditions. The rate data were correlated with a second-order kinetic model based on homogeneous reaction. The apparent activation energy was found to be 22.9kJ mol-1 for the formation of methyl acetate. The methyl acetate production was carried out as batch and continuous in a packed bed reactive distillation column with high purity methyl acetate produced.
基金Supported by the Education Foundation of Chongqing(KJ1712307)the Application Technology Research and Developments Foundation of Fuling Technology Board(FLKJ,2016ABA1026)the Young Foundation of Yangtze Normal University(2015XJXM03)
文摘Continuous homogenous azeotropic distillation(CHAD) and pressure-swing distillation(PSD) are explored to separate a minimum-boiling azeotropic system of ethyl acetate and n-hexane. The CHAD process with acetone as the entrainer and the PSD process with the pressures of 0.1 MPa and 0.6 MPa in two columns are designed and simulated by Aspen Plus. The operating conditions of the two processes are optimized via a sequential modular approach to obtain the minimum total annual cost(TAC). The computational results show that the partially heat integrated pressure-swing distillation(HIPSD) has reduced in the energy cost and TAC by 40.79% and 35.94%, respectively, than the conventional PSD, and has more greatly reduced the energy cost and TAC by 62.61% and 49.26% respectively compared with the CHAD process. The comparison of CHAD process and partially HIPSD process illustrates that the partially HIPSD has more advantages in averting the product pollution, energy saving, and economy.
基金Supported by the Project funded by China Postdoctoral Science Foundation(2016M590191)the Key Basic Research Items in Application Basic Research Program of Hebei Province(16964502D)
文摘Reactive dividing wall column(RDWC) is a highly integrated unit which combines reaction distillation(RD) with dividing wall column separation technology into one shell, and it realized the chemical reaction and the separation of multiple product fractions simultaneously. In this paper, the reaction of esterification with acetic acid and ethanol to produce ethyl acetate was used as the research system, experiments and simulations of the RDWC were carried out. This system in the traditional process mostly used the homogeneous catalyst(e.g. sulfuric acid). However, in view of the corrosion of the equipment caused by the acidity of the catalyst, we used the heterogeneous catalysts – iron exchange resins – Amberlyst15 and proposed a novel catalyst loading method. Firstly,the reliability of the model of the simulation was verified by the experimental study on the change of liquid split ratio and reflux ratio. After that, the four-column model was established in Aspen Plus to analyze the effects of the amount of azeotropic agent, reflux ratio and acetic acid concentration. Finally, for a fair comparison, the economic analysis was conducted between traditional RD column and RDWC. The results showed that RDWC can save34.7% of total operating costs and 18.5% of TAC.
文摘In this paper, a theoretical-economic study was carried out based on the operation and construction of different types of equipments that use solar energy to carry out the distillation process. The conclusions drawn from the analysis aimed to determine what is necessary for the optimal design of an experimental distillation module that allows bioethanol with specific features to be obtained, for the area of Tehuantepec in Mexico. This study took the experiments carried out by various authors and extracted information relevant to the selection of the parameters and variables of the proposed distiller according to their efficiency and construction costs.
