Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTE...Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.展开更多
Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliome...Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliometer. The equilibrium compositions of the vapor phase of binary systems were calculated indirectly from the total pressure-temperature-liquid composition (pTx). The experimental data were correlated with the Wilson and NRTL(non-random two liquid) equations. The parameters of the Wilson model were employed to predict the ternary VLE data. The calculated boiling points were in good agreement with the experimental ones.展开更多
The industrial silica fume pretreated by nitric acid at 80 °C was re-used in this work. Then, the obtained silica nanoparticles were surface functionalized by silane coupling agents, such as(3-Mercaptopropyl) tri...The industrial silica fume pretreated by nitric acid at 80 °C was re-used in this work. Then, the obtained silica nanoparticles were surface functionalized by silane coupling agents, such as(3-Mercaptopropyl) triethoxysilane(MPTES) and(3-Amincpropyl) trithoxysilane(APTES). Some further modifications were studied by chloroaceetyl choride and 1,8-Diaminoaphalene for amino modified silica. The surface functionalized silica nanoparticles were characterized by Fourier transform infrared(FI-IR) and X-ray photoelectron spectroscopy(XPS). The prepared adsorbent of surface functionalized silica nanoparticles with differential function groups were investigated in the selective adsorption about Pb2+, Cu2+, Hg2+, Cd2+ and Zn2+ions in aqueous solutions. The results show that the(3-Mercaptopropyl) triethoxysilane functionalized silica nanoparticles(SiO2-MPTES) play an important role in the selective adsorption of Cu2+ and Hg2+, the(3-Amincpropyl) trithoxysilane(APTES) functionalized silica nanoparticles(SiO2-APTES) exhibited maximum removal efficiency towards Pb2+ and Hg2+, the 1,8-Diaminoaphalene functionalized silica nanoparticles was excellent for removal of Hg2+ at room temperature, respectively.展开更多
In this work, it is presented the synthesis and characterization of transparent and colorless organic-inorganic hybrid anti-graffiti protective materials obtained by sol-gel method. This type of materials is based on ...In this work, it is presented the synthesis and characterization of transparent and colorless organic-inorganic hybrid anti-graffiti protective materials obtained by sol-gel method. This type of materials is based on MTES （methyltriethoxysilane）, TPOZ （tetrapropoxide of zirconium） and PDMS （polydimethylsiloxane）. The synthesis has been carried out at 25, 35 and 45 ℃ in order to evaluate the role of temperature in the structure, microstructure and anti-graffiti behavior as well. The incorporation of zirconium within the organic modified silica network, of sols after being gelled and dried, is evident by a shoulder which increased with temperature situated at 950 cml （Si-O-Zr bonds）, and it is homogenously dispersed inside the matrix avoiding the formation of large ZrO2 precipitates. As the temperature increases, the hydrolysis and condensation reactions occur in more extension and thus, the obtained sols are more cross-linked and present more Si-O-Zr linkages. The promising anti-graffiti beha＇4ior of the protectNe hybrids was qualitatively determined being the spot removal higher than 90%.展开更多
文摘Poly (EA-MAn-APTES)/silica hybrid materials were successfully prepared fromEthyl acrylate (EA), maleic anhydride (MAn) and tetraethoxysilane (TEOS) in the presence of acoupling agent 3-aminopropyltriethoxysilane (APTES),by free-radical solution polymerization and insitu sol-gel process. The mass fraction of TEOS varied from 0 to 25%. The hybrid materials werecharacterized by the methods of FT-IR spectra, solvent extraction, scanning electron microscope (SEM), transmission electron microscope (TEM), differential scanning calorimetry (DSC) andthermogravimetric analysis (TGA) measuring apparatus to get their structures, gel contents,morphologies, particle sizes and thermal performances. The results show that the covalent bonds arebetween organic and inorganic phases, gel contents in the hybrid materials are much higher, theSiO_2 phase is well dispersed in the polymer matrix, silicon dioxide exist at nanoscale in thecomposites and have excellent thermal stability.
基金Supported by the Natural Science Foundation of Jiangxi Province(No.0020019).
文摘Vapor-liquid equilibrium (VLE) for a ternary system of methyldichlorosilane + methylvinyldichlorosi-lane + toluene and constituent binary systems were measured at 101.3kPa using a new type of magnetical pump-ebulliometer. The equilibrium compositions of the vapor phase of binary systems were calculated indirectly from the total pressure-temperature-liquid composition (pTx). The experimental data were correlated with the Wilson and NRTL(non-random two liquid) equations. The parameters of the Wilson model were employed to predict the ternary VLE data. The calculated boiling points were in good agreement with the experimental ones.
基金Project(2012CB722803)supported by the Key Project of National Basic Research and Development Program of ChinaProject(U1202271)supported by the National Natural Science Foundation of ChinaProject(IRT1250)supported by the Program for Innovative Research Team in University of Ministry of Education of China
文摘The industrial silica fume pretreated by nitric acid at 80 °C was re-used in this work. Then, the obtained silica nanoparticles were surface functionalized by silane coupling agents, such as(3-Mercaptopropyl) triethoxysilane(MPTES) and(3-Amincpropyl) trithoxysilane(APTES). Some further modifications were studied by chloroaceetyl choride and 1,8-Diaminoaphalene for amino modified silica. The surface functionalized silica nanoparticles were characterized by Fourier transform infrared(FI-IR) and X-ray photoelectron spectroscopy(XPS). The prepared adsorbent of surface functionalized silica nanoparticles with differential function groups were investigated in the selective adsorption about Pb2+, Cu2+, Hg2+, Cd2+ and Zn2+ions in aqueous solutions. The results show that the(3-Mercaptopropyl) triethoxysilane functionalized silica nanoparticles(SiO2-MPTES) play an important role in the selective adsorption of Cu2+ and Hg2+, the(3-Amincpropyl) trithoxysilane(APTES) functionalized silica nanoparticles(SiO2-APTES) exhibited maximum removal efficiency towards Pb2+ and Hg2+, the 1,8-Diaminoaphalene functionalized silica nanoparticles was excellent for removal of Hg2+ at room temperature, respectively.
文摘In this work, it is presented the synthesis and characterization of transparent and colorless organic-inorganic hybrid anti-graffiti protective materials obtained by sol-gel method. This type of materials is based on MTES （methyltriethoxysilane）, TPOZ （tetrapropoxide of zirconium） and PDMS （polydimethylsiloxane）. The synthesis has been carried out at 25, 35 and 45 ℃ in order to evaluate the role of temperature in the structure, microstructure and anti-graffiti behavior as well. The incorporation of zirconium within the organic modified silica network, of sols after being gelled and dried, is evident by a shoulder which increased with temperature situated at 950 cml （Si-O-Zr bonds）, and it is homogenously dispersed inside the matrix avoiding the formation of large ZrO2 precipitates. As the temperature increases, the hydrolysis and condensation reactions occur in more extension and thus, the obtained sols are more cross-linked and present more Si-O-Zr linkages. The promising anti-graffiti beha＇4ior of the protectNe hybrids was qualitatively determined being the spot removal higher than 90%.
