台车式热处理炉使用高速烧嘴的问题

台车式热处理炉是大件热处理常用设备,很贵,热处理数量很少的大工件,可以不必专为它建大台车式热处理炉。使用高速烧嘴供热与耐火纤维隔热就可完成大工件热处理,费用要少得多。用高速烧嘴会使有效加热区温度均匀,强化对工件的对流传热。提高生产率。用计算机调控高速烧嘴二位制工作,配套设备要合适,必须对高速烧嘴进行检测调试。使高速烧嘴在最优状态下工作,发挥其优良性能,提高炉子技术水平。

自身预热烧嘴在台车式热处理炉上的应用

现阶段很多工厂加热大型构件都使用台车式热处理炉,但大型热处理炉处理一些大型构件时费用很高,为降低费用和方便使用,可以把自身预热烧嘴安装在台车式热处理炉上,自身预热烧嘴能使炉子加热处温度均匀,从而加大热传导效率,提高台车式热处理炉的工作效率。鉴于此,对自身预热烧嘴在台车式热处理炉上的应用情况进行简要介绍和分析。

A review on spatial self-phase modulation of two-dimensional materials

Self-diffraction appears when the strong laser goes through two-dimensional material suspension,and this spatial self-phase modulation(SPPM)phenomenon can be used to measure nonlinear optical parameters and achieve optical switch.At present,the mechanism of SPPM is still ambiguous.The debate mainly focuses on whether the phenomenon is caused by the nonlinear refractive index of the two-dimensional material or the thermal effect of the laser.The lack of theory limits the dimension of the phase modulation to the radius of the diffraction ring and the vertical imbalance.Therefore,it is urgent to establish a unified and universal SSPM theoretical system of two-dimensional material.

High damping capacities of Mg-Cu based alloys

The dynamic mechanical analyzer(DMA)was applied to investigate the damping properties of Mg-Cu based alloys.The results show that the as-cast hypoeutectic Mg-Cu binary alloys exhibit ultra-high damping capacities,while the eutectic Mg-Cu alloy exhibits low damping capacity.The strain amplitude dependent damping performance reveals that the dislocation damping mainly dominates in Mg-Cu alloys.Furthermore,the influence of eutectic phase on damping mechanisms of Mg-Cu binary alloys was discussed in detail and the effect of Si addition on the damping of Mg-1%Cu based alloy was also reported.Two damping peaks are observed on the temperature dependent spectrum of Mg-Cu based alloys.One is located at room temperature,which is dislocation related peak;and the other is located at moderate temperature,which is caused by the grain boundary sliding.

High-Power-Factor Adjustable Speed Drive Using Diode Clamped Multilevel Inverter

This paper presents a new approach to alleviate the harmonics and to enhance the power factor of the ASD （adjustable speed drive）. A conventional ASD with 2-level PWM （pulse width modulation） inverters generate high dv/dt and high frequency common mode voltages which are harmful for the drive applications. It reduces the motor bearings life and conducted EMI （electro magnetic interference） deteriorates the insulation. In this paper, a diode clamped multilevel （3-level） inverter is used to perform dual task. It generates HF （high frequency） current to be injected at the input of the three-phase front-end rectifier thereby improving the harmonic spectra and the power factor. It also drives the induction motor. The salient feature of this paper is that it does not require separate converters for improving power factor and to drive induction motor. Furthermore, inverter switches operate with ZVS （zero voltage switching）, thus reducing the switching losses substantially, The voltage stress of the switches also has been reduced to half of the conventional 2-level converter. The inverter is operated with SPWM （sinusoidal pulse width modulation） technique. The simulation results for a prototype of 2.2 kW are presented.

Pulse phase and doppler frequency estimation of X-ray pulsars under conditions of spacecraft and binary motion and its application in navigation

The pulse phase and doppler frequency estimation of X-ray pulsars in dynamic situations and its application in navigation is a problem that has not been fully investigated. In this paper, solutions are proposed to solve this problem under conditions of spacecraft and binary motion. A high-precision doppler frequency (velocity) measurement model as well as a phase (range) measurement model is established. The averaged maximum-likelihood estimator is developed for the dynamic pulse phase estimation. The pulse phase tracking technique is used in the doppler frequency determination. The tracking filter is redesigned and compared with the existing algorithms. The comparison verifies the advantage of the filter algorithm presented in this pa- per. Unlike traditional views, it is found that in dynamic situations, shorter observation interval lengths will result in higher-accuracy phase and frequency estimates as the tracking filter outputs. A photon-level integrated numerical simulation is performed. Simulation results testify to the validity of the proposed phase and doppler frequency estimation scheme, and show that incorporation of velocity measurements as well as the range ones into the navigation estimator will improve the navigation steady-state performance.

Tropical cyclone spiral band extraction and center locating by binary ant colony optimization

Tropical cyclone (TC) center locating is crucial because it lays the foundation for TC forecasting. Locating TC centers, usually by manual means, continues to present many difficulties. Not least is the problem of inconsistency between TC center locations forecast by different agencies. In this paper, an objective TC center locating scheme is developed, using infrared satellite images. We introduce a pattern-matching concept, which we illustrate using a spiral curve model. A spiral band model, based on a spiral band region, is designed to extract the spiral cloud-rain bands (SCRBs) of TCs. We propose corresponding criteria on which to score the fitting value of a candidate template defined by our models. In the proposed scheme, TC location is an optimization problem, solved by an ant colony optimization algorithm. In numerical experiments, a minimal mean distance error of 17.9 km is obtained when the scheme is tested against best-track data. The scheme is suitable for TCs with distinct SCRBs or symmetrical central dense overcast, and for TCs both with and without clear eyes.

A self-assembled(H_2O)_(20)(CH_3OH)_4 binary cluster containing a grail-shaped hexadecameric water cluster trapped in the cavity of a metal-ligand hybrid

A discrete centrosymmetric （H2O）20（CH3OH）4 binary cluster was confined in the cavity of a metaMigand hybrid [Ag4（bpda）2（bpp）4＂ 14H2O.2CH3OH], （1） （where bpp = 1,3-bis（4-pyridyl）propane and H2bpda = 2,2＇-biphenyldicarboxylic acid） The novel mixed water-methanol cluster consists of one grail-shaped hexadecameric cluster, four dangling water and four hanging methanol molecules. The （H2O）16 cluster is composed of two pairs of edge-sharing （H2O）5 rings attached to one （H2O）4 core with twenty hydrogen bonds. Alternatively, the （H2O）16 cluster is structurally similar to a complicated hydrocarbon generated by undergoing [2＋2] cycloaddition of 1,2,3,4,5,6-hexahydropentalene, which reveals the resemblance between water clusters and organic compounds.